Synology DiskStation DS214 User manual

Synology DiskStation DS214
Quick Installation Guide
Synology_QIG_DS214_201307

2
Table of Contents
Chapter 1: Before You Start
Package Contents .............................................................................................................................................................. 3
Synology DiskStation at a Glance.................................................................................................................................... 4
Safety Instructions .............................................................................................................................................................. 5
Chapter 2: Hardware Setup
Tools and Parts for Hard Disk Installation....................................................................................................................... 6
Install Hard Disks................................................................................................................................................................ 6
Start Up Your DiskStation.................................................................................................................................................. 8
Chapter 3: Install DSM on DiskStation
Install DSM from the Web Browser ................................................................................................................................ 10
Install DSM from the Installation Disc ............................................................................................................................ 11
For Windows...................................................................................................................................................................... 11
For Mac OS X.................................................................................................................................................................... 13
For Linux ............................................................................................................................................................................ 13
Learn More ........................................................................................................................................................................ 15
Appendix A: Specifications
Appendix B: LED Indication Table

3
Chapter
1
Chapter 1: Before You Start
Before you start setting up DiskStation, please check the package contents to verify that you have received the
items below. Please also read the safety instructions carefully before use to prevent your DiskStation from any
damages.
Package Contents
Main unit x 1 AC power cord x 1
AC power adapter x 1
RJ-45 LAN cable x 1
Installation disc x 1
Screws for 2.5” hard drives x 10

4 Chapter 1: Before You Start
Synology DiskStation at a Glance
No.
Article Name
Location
Description
1) LED Indicators Front Panel
The LED indicators are used to display the status of the internal disk and the
system. For more information, see "Appendix B: LED Indication Table" on
Page 17.
2) USB 2.0 Port Front Panel The Synology DiskStation offers USB 2.0 ports for adding additional external
hard drives, USB printers, or other USB devices.
3) Copy Button Front Panel
The Copy button lights up when you connect a USB Device to the USB port.
Pressing the button will copy the data from the connected USB device to
Synology DiskStation’s internal HDD.
4) Power Button Front Panel
The power button is used to turn Synology DiskStation on or off.
To turn off Synology DiskStation, press the power button and hold it until you
hear a beep sound and the Power LED starts blinking.
5) Fan Back Panel The fan is built to exhaust waste heat out of Synology DiskStation. If the fan is
malfunctioning, the system will play beep sounds.
6) USB 3.0 Ports Back Panel The Synology DiskStation offers USB 3.0 ports for adding additional external
hard drives, USB printers, or other USB devices.
7) RESET Button Back Panel 1.To restore IP, DNS, passwords for the admin account to default value.
2.To reinstall the Synology DiskStation.
8) LAN Port Back Panel The LAN port is where you connect RJ-45 cable to Synology DiskStation.
9) Power Port Back Panel The power port is where you connect the AC adapter to Synology DiskStation.

5 Chapter 1: Before You Start
Safety Instructions
Keep away from direct sunlight and away from chemicals. Make sure the environment does not
experience abrupt changes in temperature or humidity.
Do not place the Synology product close to any liquid.
Before cleaning, unplug the power cord first. Wipe Synology product with damp paper towels. Do
not use chemical or aerosol cleaners to clean it.
Do not place the Synology product on a cart, table, or desk, which is not stable to avoid the
product from falling over.
The power cord must plug i
n to the right supply voltage. Make sure that the supplied AC voltage
is correct and stable.
To remove all electrical current from the device, ensure that all power cords are disconnected
from the power source.
Risk of exp
losion if battery is replaced with an incorrect type. Dispose of used batteries
appropriately.

6
Chapter
2
Chapter 2: Hardware Setup
Tools and Parts for Hard Disk Installation
A screwdriver
At least one 3.5” or 2.5” SATA hard disk
(Please visit www.synology.com for compatible hard disk models.)
Warning: If you install a hard disk that contains data, system will format the hard disk and erase all data. If you need
the data in the future, please back it up before installation.
Install Hard Disks
1 Remove the hard drive bay cover from the front panel.
2 Push the latch upward and pull the handle to remove the hard drive tray from your DiskStation.

7 Chapter 2: Hardware Setup
3 Load the hard disk in the hard drive tray.
For 3.5” Hard Disk: Remove the fastening panels from the sides of the hard drive tray. Place the hard disk
in the hard drive tray. Then insert the fastening panels to secure the hard disk in place.
For 2.5” Hard Disk: Remove the fastening panels from the sides of the hard drive tray and put them in a
safe place. Place the hard disk in the blue area (shown below) of the hard drive tray, turn the tray upside
down, and then tighten the screws to secure the hard disk.
4 Make sure the side marked with "UP"is facing up, and insert the hard drive tray into the empty hard drive bay.
You should hear a click when the tray is locked in place.
5 Repeat the above steps to assemble the other hard disk you have prepared.

8 Chapter 2: Hardware Setup
6 The disks’ positions are numbered as shown below.
7 Replace the hard drive bay cover to finish the installation.
Note: If you want to set up a RAID set, it is recommended that all installed hard disks are of the same size to make
the best use of hard disk capacity.
Start Up Your DiskStation
1 Use the LAN cable to connect DiskStation to your switch/router/hub.
2 Connect the AC adapter to the power port of DiskStation. Connect one end of the AC power cord to the AC
power adapter, and the other to the power outlet.

9 Chapter 2: Hardware Setup
3 Press the power button to turn on your DiskStation.
Your DiskStation is now online and detectable from a network computer.

10
Chapter
3
Chapter 3: Install DSM on DiskStation
Once the hardware is ready, your DiskStation requires DiskStation Manager (DSM) – the operating system
specifically designed for Synology NAS – to start working.
We highly recommend using Synology’s online Web Assistant for installing DSM from the web browser. Synology
Web Assistant automatically downloads the latest available software updates from the Internet and guides you
through the installation. You can also use Synology Assistant available in the installation disc in your package to
complete DSM installation via personal computer.
Install DSM from the Web Browser
By default your DiskStation model has a built-in tool called Web Assistant to help you configure and install the
DSM operating system. Please refer to the steps in the following section.
1 Power on DiskStation and have it connected to the Internet.
2 Depending on your network environment, there are two ways to start DSM installation on your computer’s web
browser:
With Internet access: Go to find.synology.com
Without Internet access: Go to diskstation:5000
3 Web Assistant will be launched on your web browser. It will search and find your DiskStation within LAN, and
the status of your DiskStation should be Not Installed.
4 Click Connect to start the setup process. Follow the onscreen instructions to complete the setup process.
Note:
1. Suggested browsers: Chrome, Firefox.
2. Both the DiskStation and the computer should be in the same local network.
3. Internet connection must be available during DSM installation with Web Assistant.