Synthes PEAK User manual

PREPARE SEPARATE WITHDRAW PRP
PEAK
TM PLATELET RICH PLASMA SYSTEM
USER QUICK GUIDE
Press to start 60 second
centrifugation.
Rotate to 1for RBC
removal.
When the buy coat is
between the two
horizontal RBC Removal
Stop Lines, move to .
Rotate to 2for platelet
poor plasma removal for 15
seconds.
Rotate to to end
centrifugation process.
4
5
6
7
8
Attach new sterile cannula
to 10mL syringe and
remove PRP.
Press release button on
rear of Centrifuge to
detach and dispose of
Disposable Unit.
9
10
Using a 30mL syringe,
draw 3mL of ACD-A,
followed by 27mL of
blood.
Align and connect
Disposable Unit to
Centrifuge .
Transfer blood into
Disposable Unit using
cannula. Remove cannula.
1
2
3

DSUS/MTK/0514/0101 ©DePuy Synthes Mitek Sports Medicine, a division of DOI 2014. All rights reserved. June 2014. 4907-01 REV. AB
PLATELET POOR
PLASMA REMOVAL
RED BLOOD CELL
REMOVAL
ACTIVATION
BUTTON
IF NEEDED
PRESS & HOLD FOR 1 SECOND
TO MANUALLY STOP
DISPOSABLE UNIT ICONS
CENTRIFUGE ICONS
HOMEPOSITION
ARROW
Valve
Max Fill Line
Red Blood Cell Removal Stop Lines
Position Arrow
Distributed by:
DePuy Mitek, Inc
325 Paramount Dr.
Raynham, MA 02767
1 [phone]
The PEAK PRP System is intended to be used for the safe and rapid preparation
of autologous platelet-rich-plasma (PRP) from a small sample of blood
collected at the patient’s point of care. The PRP is mixed with autograft
and/or allograft bone prior to application to a bony defect for improving
handling characteristics.
Manufacturer:
DSM Biomedical
735 Pennsylvania Dr.
Exton, PA 19341 USA
www.dsm.com/medical