System air EE VTR 250/B User manual

Document in original language | · Rev01
EE VTR 250/B
Service & Accessories Installation Manual
GB

| Rev01
© Copyright Systemair UAB
All rights reserved
E&OE
Systemair UAB reserves the rights to alter their products without notice.
This also applies to products already ordered, as long as it does not affect the previously agreed specifications.
Systemair is not liable or bound by warranty if these instructions are not adhered to during installation or service.

| Rev01
Contents
1 Overview ......................................................1
1.1 Warranty..............................................1
1.2 Type label.............................................1
1.3 Disposal and recycling .............................1
2 Important Safety Information.............................1
2.1 Intended Use.........................................2
2.2 Admonitions .........................................2
2.3 Declaration of Conformity ........................3
3 System curves ................................................4
3.1 Supply air, F7/ePM1 60% type
filter....................................................4
3.2 Extract air, M5/Coarse 70% type
filter....................................................4
4 Technical Data ................................................5
4.1 Dimensions and Weight, L model ...............5
4.2 Dimensions and Weight, R model...............6
4.3 Connections Left and Right models.............7
4.4 Power consumption and fuse size ..............7
5 Configuration .................................................7
5.1 General................................................7
5.2 Startup wizard .......................................7
5.3 Common symbols...................................8
5.4 Menu overview .....................................8
5.5 Home screen.........................................9
5.5.1 User modes ..............................9
5.5.2 Temperature settings ................ 11
5.5.3 Airflow settings ....................... 12
5.5.4 Indoor Air Quality ..................... 13
5.5.5 Status line .............................. 13
5.6 Description of User functions .................. 13
5.7 Main menu ......................................... 14
5.7.1 Unit Information ................ 14
5.7.2 Alarms .................................14
5.7.3 Week Schedule......................18
5.7.4 Filter .................................19
5.7.5 System Preferences............. 19
5.7.6 Service ...............................19
5.7.7 Help.....................................27
6 Service .......................................................28
6.1 Warnings............................................ 28
6.2 Internal components ............................. 29
6.2.1 Component descriptions ............ 29
6.2.2 Overheat protection reset
button ...................................30
6.3 Electrical connections............................ 30
6.3.1 Main board layout .................... 31
7 Troubleshooting............................................ 32
8 Accessories.................................................. 34
8.1 Internet Access Module (IAM) ................. 34
8.1.1 Setting up remote control of
the unit .................................. 34
8.2 Multiple control panels .......................... 36

Overview |1
1 Overview
Read the installation instructions completely and carefully.
1.1 Warranty
For the assertion of warranty claims, the products must be correctly connected and operated, and used in accordance
with the data sheets. Further prerequisites are a completed maintenance plan with no gaps and a commissioning re-
port. Systemair will require these in the case of a warranty claim.
1.2 Type label
Before calling your service representative, make a note of the specification and production number from the type label,
which can be found next to the external connections and inside of the unit.
Fig. 1 Type label
Position Description
1Product code (product specification)
2Product item number
3Production order number
4Serial number
5Production date (YY.MM.DD)
6QR code for manufacturing order (MO) number and software version
7QR code for the spare parts list and documentation
1.3 Disposal and recycling
This product is compliant to the WEEE directive. When disposing the unit, follow your local rules
and regulations.
This product packing materials are recyclable and can be reused. Do not dispose in household
waste.
2 Important Safety Information
• Observe and respect local conditions, regulations and laws.
• Safety elements may not be dismantled, circumvented or deactivated.
• Wear protective equipment during all work in the vicinity of the unit.
• Do not allow children to play with the device.
| Rev01

2| Important Safety Information
2.1 Intended Use
• Abide by the system-related conditions and requirements of the system manufacturer or plant constructor.
• Keep all the warning signs on the device and in a legible condition.
• The device is not to be used by persons (including children) with reduced physical, sensory or mental capabilities, or
lack of experience and knowledge, unless they have been given supervision or instruction.
• The system should operate continuously, and only be stopped for maintenance/service.
• Do not connect tumble dryers to the ventilation system.
• Make sure that filters are mounted before starting the unit.
2.2 Admonitions
Danger
• Make sure that the mains supply to the unit is disconnected before performing any maintenance or
electrical work!
• All electrical connections and maintenance work must be carried out by an authorized installer and in
accordance with local rules and regulations.
Warning
• This product must only be operated by a person who has suitable knowledge or training within this field
or carried out with the supervision of a suitably qualified person.
• Beware of sharp edges during mounting and maintenance. Use protective gloves.
Warning
• Risk of injury due to rotating parts that have not come to a complete standstill after mains supply to the
unit have been disconnected.
| Rev01

Important Safety Information | 3
2.3 Declaration of Conformity
Manufacturer
Systemair UAB
Linų st. 101
LT–20174 Ukmergė, LITHUANIA
Office: [phone] Fax: [phone]
www.systemair.com
hereby confirms that the following product:
Heat recovery ventilation unit: EE VTR 250/B
(The declaration applies only to product in the condition it was delivered in and installed in the facility in accordance
with the included installation instructions. The insurance does not cover components that are added or actions carried
out subsequently on the product).
Comply with all applicable requirements in the following directives:
• Machinery Directive 2006/42/EC
• Low Voltage Directive 2014/35/EU
• EMC Directive 2014/30/EU
• Ecodesign Directive 2009/125/EC
• RoHS Directive 2011/65/EU
The following regulations are applied in applicable parts:
1253/2014 Requirements for ventilation units
1254/2014 Energy labelling of residential ventilation units
327/2011 Requirements for fans above 125 W
The following harmonized standards are applied in applicable parts:
EN ISO 12100:2010 Safety of machinery - General principles for design - Risk assessment and risk reduction
EN 13857 Safety of machinery – Safety distances to prevent hazard zones being reached by upper or
lower limbs
EN 60 335-1 Household and similar electrical appliances – Safety Part 1: General requirements
EN 60 335-2-40 Safety of household and similar electrical appliances – Part 2-40: Particular requirements
for electrical heat pumps, air-conditioners and dehumidifiers
EN 62233 Measurement methods for electromagnetic fields of household appliances and similar
apparatus with regard to human exposure
EN 50 106:2007 Safety of household and similar appliances – Particular rules for routine tests referring to
appliances under the scope of EN 60 335-1 and EN 60967
EN 61000-6-2 Electromagnetic compatibility (EMC) – Part 6-2: Generic standards – Immunity for industrial
environments
EN 61000-6-3 Electromagnetic compatibility (EMC) – Part 6-3: Generic standards – Emission standards for
residential, commercial and light-industrial environments
Skinnskatteberg, 30-07-2017
Mats Sándor
Technical Director
| Rev01

4|System curves
3 System curves
Every change in the pressure of the ventilation system, will result in a different airflow.
Each curve shows a different airflow level setting:
1. 16% (MINIMUM LEVEL)
2. 20% (LOW LEVEL)
3. 50% (NORMAL LEVEL)
4. 80% (HIGH LEVEL)
5. 100% (MAXIMUM LEVEL)
Airflow level settings can be changed in Service menu.
The pressure is affected by the filter type and differ with each filter combination.
System curves for each airflow level with standard filters shown bellow.
3.1 Supply air, F7/ePM1 60% type filter
3.2 Extract air, M5/Coarse 70% type filter
| Rev01

Technical Data | 5
4 Technical Data
4.1 Dimensions and Weight, L model
Fig. 2 Dimensions of left hand unit
* Water coil connections.
** Drainage.
The unit weight is 56 kg.
| Rev01

6| Technical Data
4.2 Dimensions and Weight, R model
Fig. 3 Dimensions of right hand unit
* Water coil connections.
** Drainage.
The unit weight is 56 kg.
| Rev01