System Q NiteDevil 24C User manual

© 2022 System Q Ltd
NiteDevil 24C Camera
SEE708
8MP Eyeball 2.8mm Built In Mic
Instruction Manual
NiteDevil.com

xSEE708
I
© 2022 System Q Ltd
NiteDevil.com
Table of Contents
Part 1 Introduction 1
1 SEE708 ............................................................................................................................ 1
Part 2 Tools & Handy Extras 1
Part 3 Connections 2
Part 4 4-In-1 Technology 2
Part 5 OSD Menu 3
1 8MP OSD Menu ............................................................................................................... 4
2 Key Menu Settings .......................................................................................................... 5
Part 6 Audio Over COAX 6
Part 7 Troubleshooting 7
1 Camera Rebooting / Turning Off ..................................................................................... 7
2 Poor Quality Images ....................................................................................................... 7
3 Image isBlack & White .................................................................................................. 7
4 NCD / No Image Displayed on Recorder ......................................................................... 7
Part 8 General Maintenance 8
Part 9 Specification 9
1 SEE708 ............................................................................................................................ 9
Part 10 Conditions 10
1 General Company Disclaimer ....................................................................................... 10
2 WEEE Declaration ......................................................................................................... 10
3 Copyright ...................................................................................................................... 10
Index 11

Introduction
© 2022 System Q Ltd
1
NiteDevil.com
Introduction
1.1 SEE708
The all new NiteDevil® 24C can stay in fullcolour around the clock using the minimalamount of
naturallight to produce superb fullcolour images. It really is a game changer inperformance and
should be used as a part of any CCTV systemrequiring fullcolour images in key areas around
entrances etc.
With built in dualIR and white light you can choose how the camera best works in your install.
Using white light to give visualwarning or using IR illumination to get a more discreet set up.
Tools & Handy Extras
Screwdriver
Drill
12V DC PSU
Drillbits
BNC Crimp Tool& BNCs
RG59 Coax Cable
DigitalMulti-Meter
LCD400K - CCTV Test monitor

31/03/2022
xSEE708
2NiteDevil.com
Connections
The camera has a 2.1mmsocket which requires 12V DC, use a regulated power supplyrated
above the current draw ofthe camera.
The camera is polarity sensitive so connections must be correctly made.
The camera has a standard BNC connector for video output, the output can be changed to
AHD, CVI or CVBS if required in the menu
4-In-1 Technology
Selectable HD-TVI, HD-CVI, AHD and CVBS (Analogue) Output. As default the camera is
set to HD-TVI, however the output can be changed to AHD, CVI or CVBS ifrequired.
This output can be changed with in the menu camera. Please note the "Mode” in the menu of the
DVR won’t change the format, as the menuoverrides the output.
See OSD Menu for accessing and changing the video format.
3

OSD Menu
© 2022 System Q Ltd
3
NiteDevil.com
OSD Menu
Access to the camera menu is by Coaxitron. For the ZIP DVRs, ZIP Coaxitron is set as
default.
To access the Cameras Menu via coaxitron:-
1. Click on the image in Live view
2. Click on the PTZ button at the bottomofthe screen
3. Click on the IRIS + / centre button to display the menu
Use the directionalarrows to move up and
down through the menu.
Use the directionalarrows left and right to
change the option.
Use IRIS + to select & enter that menuoption.

31/03/2022
xSEE708
4NiteDevil.com
5.1 8MP OSD Menu
Video Mode
TVI / AHD / CVI / CVBS
Format
60Hz/ 50Hz/ NTSC / PAL
Language
English / Spanish / French/ Chinese
Exposure
Exposure Mode
Global
AGC
High / Middle / Low
Back
Exit
Save – Exit
Day & Night
Mode
Ext / Color/ B/W
Dim
0 – 3 (3 Default)
Back
Exit
Save – Exit
Video Settings
AWB
Auto
Brightness
1 -9 (5 Default)
Contrast
1 -9 (5 Default)
Sharpness
1 -9 (5 Default)
Saturation
1 -9 (5 Default)
NR
1 -9 (5 Default)
Mirror
Default / Mirror / Flip / Rotate
Back
Exit
Save – Exit
Volume
0 – 9 (9 Default)
Reset
Exit
Save – Exit

OSD Menu
© 2022 System Q Ltd
5
NiteDevil.com
5.2 Key Menu Settings
Exposure Mode - AUTO / GLOBE / GLOBAL sets the required shutter speed for the current
light level. The shutter speed willautomatically detect the required lengthoftime to keep the
digitalsensor exposed to light. FLK optionsets the shutter speed to stop synchronisation with
lighting so that pulsing effect is minimised.
White Balance - Colour adjustment of the camera to be set up so objects appear a natural
colour. ATW / PRO (Automatic trackingwhite balance) continually tracks and adjusts the white
balance, making it suitable for use in cameras in which the image content and lighting are subject
to changes.
Day & Night - The camera canbe set to colour or B&W mode or have it automaticallyswitch
Externalis set as default, the switch betweencolour and black & white is controlled by an
externaltrigger In this a light dependent resistor.
DNR (Noice Reduction) - Noise Reduction is the process ofremovingnoise fromthe video
signalby applying a digitalfilter. 2D noise reduction reduces noise in the foreground ofthe image
where as 3D noise reduction reduces noise in both the foreground and the background ofthe
image.
D-WDR - Digitally adjusts the exposure in areas ofthe frame to maintain optimum levels in both
the dark and bright areas ofan image.
NOTE - Some models may not have D-WDR function.
Reset - Defaults the camera to factory settings. This setting helps when fault finding issues with
the camera to ensure allsettings are defaulted.

31/03/2022
xSEE708
6NiteDevil.com
Audio Over COAX
As of writing this (March 2022), the Audio over COAX (CoaxialAudio) is compatible withthe ZIP
SUPA-S range ofrecorders.
*Note the standard SUPA recorders are not compatible with Audio over COAX.
To enable, in the menu on the SUPA-S go to System > General > Audio Input Type
Select Coaxial Audio
Select Apply

Troubleshooting
© 2022 System Q Ltd
7
NiteDevil.com
Troubleshooting
7.1 Camera Rebooting / Turning Off
A. Check the voltage to the camera (under load) using a digitalmulti-meter, ifbelow 10.8V then
move the power supply closer to the camera.
B. For 12V DC cameras, only use regulated power supply rated above the current consumption,
so that the camera is always receiving the correct supplywhichis rated above the current
consumption.
C. Use thicker gauge copper cablingto reduce the voltage drop to the camera, using thicker
cable willreduce the resistance betweenthe camera and the power supply and therefore reduce
the voltage dropped along the cable.
7.2 Poor Quality Images
A. Check the video format the DVR (digitalvideo recorder), thenset the camera to the relevant
video format – see the 4-In-1 Technology
B. Ifset to CVBS, thenthis is a low quality video output for legacy systems (analogue - CVBS),
when usinga 2 MegaPixelDVR or above then use another video format, like HD-TVI.
C. Reset the camera menuvia Zip Coaxitron – OSD Menu
D. Check ifthe DVR (digitalvideo recorder) supports the resolutionofthe camera.
7.3 Image is Black & White
A. Check the video format your DVR supports, thenset the camera to the relevant video format
– see the 4-In-1 Technology
B. Reset the camera menuvia Zip Coaxitron OSD Menu
D. Check ifthe DVR (digitalvideo recorder) supports the resolutionofthe camera.
7.4 NCD / No Image Displayed on Recorder
A. Check the voltage to the camera (under load) using a digitalmulti-meter, ifbelow 10.8V then
move the power supply closer to the camera.
B. For 12V DC cameras, only use regulated power supply rated above the current consumption,
so that the camera is always receiving the correct supplywhichis rated above the current
consumption.
2
3
2
3

31/03/2022
xSEE708
8NiteDevil.com
C. Use thicker gauge copper cablingto reduce the voltage drop to the camera, using thicker
cable willreduce the resistance betweenthe camera and the power supply and therefore reduce
the voltage dropped along the cable.
D. Ensure that the BNC – BNC lead that is connected betweenthe camera and DVR has no
shorts between the ground and the centre core (positive) or open circuits along the centre core
(positive) or open circuits along the ground.
General Maintenance
Routinely clean the camera to prevent dust build up as this can effect the performance ofthe
camera. It is recommended to use a damp non-abrasive microfibre cloth.
Routinely check the connections for power and data to ensure no water ingress and corrosion.
Check that the cameras are firmly attached to the wallor mounting bracket.
Check playback in the recorder to ensure the camera is recording and triggering properly.

Specification
© 2022 System Q Ltd
9
NiteDevil.com
Specification
9.1 SEE708
Resolution
4K (8MP)
Lens Type
2.8mmFixed Lens
Image Output
1 Volt Peak-Peak 75 ohm
Min.Illumination
0 Lux IR On
Day/Night
24C / MechanicalIR (True Day-Night)
InfraRed LEDs
2 White LEDs / 2 IR LEDs
IR Range
20M
Audio
Built In Mic (Audio over COAX)
Input Voltage
12V DC
Current Consumption
300mA (IR On)
IP Rating
IP66
Video Connection
BNC Socket
Power Connection
2.1mmDC Socket
Finish
White/ Black
Build
Metal
Dimensions
100mm(Diameter) x 90 mm(Height)

31/03/2022
xSEE708
10 NiteDevil.com
Conditions
10.1 General Company Disclaimer
All specifications are approximate. System Q Ltd reserves the right to change any product
specifications or features without notice. Whilst every effort is made to ensure that these
instructions are complete and accurate, System Q Ltd cannot be held responsible in any
way for any losses, no matter how they arise, from errors or omissions in these
instructions, or the performance or non-performance of the equipment that these
instructions refer to.
10.2 WEEE Declaration
This symbol on the products and/or accompanying documents means that used electronic
equipment must not be mixed with general household waste. For treatment, recovery and
recycling please return this unit to your trade supplier or local designated WEE/CG0783SS
collection point as defined by your local council.
10.3 Copyright
© Copyright 2022
Zip is a registered trademark ofSystemQ Ltd, Chesterfield. Derbyshire. S40 2WB

Index
11
© 2022 System Q Ltd
NiteDevil.com
Index
- A -
Adjustment 3
- C -
Cleaning 8
Connections 8
Copyright 10
- D -
Declaration 10
Dimensions 9
Disclamer 10
- G -
General Disclaimer 10
- H -
Handy Extras 1
- M -
Maintenance 8
- O -
OSD Menu 3
- S -
Settings 3
Specification 9
- T -
Tools 1
Troubleshooting 7
- V -
Video Loss 7
Voltage drop 7
- W -
WEEE Declaration 10