System Q SEE820 User manual

Features
•Varifocal 2.8-12mm Lens
•Quad Technology
•2 High Power IRs - Up to 35m Range
• True Day/Night IR Cut O Filter
• UTC and Co-axitron Control
• Weatherproof IP66 Rated Metal Body
• Extra Deep Base Option
• HD 1080P
• Switchable Video Output
• Gloss Black or Pure White
Colour Options
Specication
FUNCTION SPECIFICATION
Lens 2.8-12mm Varifocal
Resolution 1080P HD
Lux 0 with LEDs on
DayNight True Day/Night Filter
IR LEDs 2
IR Range Up to 35m
Input Voltage 12V DC / 400mA
IP Rating IP66
Backlight Backlight
Compensation
Finish Gloss Black or Pure
White
Dimensions 120 Dia. x 90mm
All specications are approximate. System Q Ltd reserves the right
to change any product specications or features without notice.
Whilst every eort is made to ensure that these instructions are
complete and accurate, System Q Ltd cannot be held responsible
in any way for any losses, no matter how they arise, from errors
or omissions in these instructions, or the performance or
non-performance of the equipment that these instructions refer to.
This symbol on the products and/or accompanying
documents means that used electronic equipment
must not be mixed with general household waste.
For treatment, recovery and recycling please return
this unit to your trade supplier or local designated
collection point as dened by your local council.
WEE/CG0783SS
01246 200 000 systemq.com
2.8-12mm Eyeball with Varifocal Lens
1
SEE820
SEE820
The SEE820 is a multi-format HD eyeball camera with Multi-Technology
outputs, a varifocal lens and high powered IRs. It has TVI, AHD and CVI
mode selection plus a separate output for CVBS* (analogue) use.
Special Features
The SEE820 is a multi-format HD camera with TVI, AHD, CVI and CVBS
mode selection on a yellow BNC lead and in addition, a separate analogue
output (CVBS) on a separate white BNC lead.
* Additional CVBS output available if using HD, but only one CVBS if not.
In HD-TVI mode, the cameras have the Coaxitron Control facility for changing
the OSD menu specifi cations via the DVR or remote network connection, or
via the camera.
This camera has the NiteDevil menu feature for reducing shutter speed for
improving light capture at night.
**If you have fi tted cameras with IRs and have experienced condensation
issues or IR fl are, then this camera with the fl at dual front glass should reduce
these problems.
Mounting the Camera
Other Products To Consider
External HD
NiteDevil Camera
with 2.8-12mm
Motorised Lens -
White
SEE850W
External HD
NiteDevil Camera
with 2.8-12mm
Motorised Lens -
Black
SEE850B
The camera is primarily for outdoor mounting on a wall, building or under a
lintel, but could also be used inside in an appropriate building. A deep base
can be used for cable management. Either attach the deep base or secure
the thinner bracket base to the wall, building etc. with suitable screws and
connect the respective cable connections.

01246 200 000 systemq.com
2.8-12mm Eyeball with Varifocal Lens
2
The SEE820 draws 12V DC 400mA when IRs are on and power consumption
is rated at 4.8 watts. It should be noted that extra headroom is required when
the camera is fi rst powered up so we can recommend connecting it to a 12v DC
regulated 600mA power supply minimum. The camera is provided with a fl y lead
with a mini power 2.1mm DC socket. The camera is polarity sensitive so connections
must be made correctly.
Powering the Camera
The dome camera comes with a fl y lead for power, TVI/AHD/CVI/CVBS
selected BNC video output, plus a second analogue (CVBS) video output
on separate BNC lead. Connect the HD camera to control equipment via
female BNC-BNC lead. When using a co-ax type cable such as RG59 or
similar, the outer braid of the co-ax provides the “0V GROUND” connection
and the inner core provides the “Video” connection. The separate analogue
(CVBS) output is primarily available for setup purposes but can be used for
viewing via an analogue monitor. Note that you cannot use both analogue
outputs together but can view one
analogue and one HD.
These cameras can be viewed in
TVI, AHD, CVI and CVBS.
First power the camera up when
it is connected to a monitor or
DVR and monitor and see if the
required format displays a colour
picture. If not, or if it’s in black
and white, press the joystick button
in and not down for 3 seconds.
Repeat until picture displays in
colour. (*Note that the picture
may be in black and white in low
light levels, or the cellophane lens
cover has not been removed).
Alternatively, you can change the camera format in the menu:
Example - Change the camera format to TVI:
<System> <Output> <MAIN OUTPUT ANALOGUE OUT0
<System> <Output> <ANALOGUE OUT0 TVI
When you are in the correct format, press the joystick button in momentarily if
you wish to access the menu.
This camera has manual zoom and focus. After installing the camera and
selecting the appropriate video format, adjust the Zoom control by removing
the black zoom control cover and then adjusting the zoom control screw at
the bottom of the camera lens. When the area contains the appropriate view,
albeit it may be out of focus, adjust the Focus screw for best results. In the
camera menu you can enter the ‘Focus Adjust’ option and select the area for
Connecting the Camera to Control Equipment
TVI
AHD
CVBS
CVI
Switch Cycle
Manual Zoom and Focus
Features
•Varifocal 2.8-12mm Lens
•Quad Technology
•2 High Power IRs - Up to 35m Range
• True Day/Night IR Cut O Filter
• UTC and Co-axitron Control
• Weatherproof IP66 Rated Metal Body
• Extra Deep Base Option
• HD 1080P
• Switchable Video Output
• Gloss Black or Pure White
Colour Options
Specication
FUNCTION SPECIFICATION
Lens 2.8-12mm Varifocal
Resolution 1080P HD
Lux 0 with LEDs on
DayNight True Day/Night Filter
IR LEDs 2
IR Range Up to 35m
Input Voltage 12V DC / 400mA
IP Rating IP66
Backlight Backlight
Compensation
Finish Gloss Black or Pure
White
Dimensions 120 Dia. x 90mm
All specications are approximate. System Q Ltd reserves the right
to change any product specications or features without notice.
Whilst every eort is made to ensure that these instructions are
complete and accurate, System Q Ltd cannot be held responsible
in any way for any losses, no matter how they arise, from errors
or omissions in these instructions, or the performance or
non-performance of the equipment that these instructions refer to.
This symbol on the products and/or accompanying
documents means that used electronic equipment
must not be mixed with general household waste.
For treatment, recovery and recycling please return
this unit to your trade supplier or local designated
collection point as dened by your local council.
WEE/CG0783SS
Other Products To Consider
External HD
NiteDevil Camera
with 2.8-12mm
Motorised Lens -
White
SEE850W
External HD
NiteDevil Camera
with 2.8-12mm
Motorised Lens -
Black
SEE850B

01246 200 000 systemq.com
2.8-12mm Eyeball with Varifocal Lens
3
Access to the camera menu is via the menu buttons on the camera or via the
‘Up the Co-ax’ connection. Access by the menu buttons is described below.
To use the ‘Up to Co-ax’ connection, it can be accessed using the PTZ menu
in the MEGA TVI or MAX TVI DVRs using the AlienTVI(Coaxitron) protocol.
This protocol is generally set in the PTZ Settings menu as default but if not,
select using the following:
Enter the DVR ‘Menu’, click on ‘Video’, ‘PTZ’ and select the channel number
of the TVI camera connected to the DVR.
Then click on ‘PTZ Settings’ and select ‘AlienTVI(Coaxitron) and click ‘OK’.
best focus results by creating a box (Wide, Middle or Narrow) to select the
required area for focusing.
Menu Access via TVI DVR using Coaxitron
Now click on the ‘PTZ’ button at the bottom of the screen and a full screen
picture will be displayed with the PTZ control menu. Click on the ‘IRIS+’
button to display the menu.
Use the directional
arrows to move up
and down or left and
right to select options.
Features
•Varifocal 2.8-12mm Lens
•Quad Technology
•2 High Power IRs - Up to 35m Range
• True Day/Night IR Cut O Filter
• UTC and Co-axitron Control
• Weatherproof IP66 Rated Metal Body
• Extra Deep Base Option
• HD 1080P
• Switchable Video Output
• Gloss Black or Pure White
Colour Options
Specication
FUNCTION SPECIFICATION
Lens 2.8-12mm Varifocal
Resolution 1080P HD
Lux 0 with LEDs on
DayNight True Day/Night Filter
IR LEDs 2
IR Range Up to 35m
Input Voltage 12V DC / 400mA
IP Rating IP66
Backlight Backlight
Compensation
Finish Gloss Black or Pure
White
Dimensions 120 Dia. x 90mm
All specications are approximate. System Q Ltd reserves the right
to change any product specications or features without notice.
Whilst every eort is made to ensure that these instructions are
complete and accurate, System Q Ltd cannot be held responsible
in any way for any losses, no matter how they arise, from errors
or omissions in these instructions, or the performance or
non-performance of the equipment that these instructions refer to.
This symbol on the products and/or accompanying
documents means that used electronic equipment
must not be mixed with general household waste.
For treatment, recovery and recycling please return
this unit to your trade supplier or local designated
collection point as dened by your local council.
WEE/CG0783SS
Other Products To Consider
External HD
NiteDevil Camera
with 2.8-12mm
Motorised Lens -
White
SEE850W
External HD
NiteDevil Camera
with 2.8-12mm
Motorised Lens -
Black
SEE850B

01246 200 000 systemq.com
2.8-12mm Eyeball with Varifocal Lens
4
OSD Menu
The SEE820 has an onscreen display menu. This can be accessed using the
joystick on the camera.
Press the centre button straight down
(see arrow) to enter the menu and
use Left, Right, Up and Down to move
through and amend menu settings.
Alternatively use the TVI DVR PTZ menu as detailed in ‘Menu Access via DVR’
above.
The following menu display is shown:
IRIS ELC
ALC
Electronic Light Control - Overall
brightness of picture
Auto Light Compensation -
Measures peak light levels
FOCUS ADJ OFF
ON
Focus Area Wide/Narrow/Middle
Disp Tone (Display Tone 0 Low, 1
Medium, 2 High)
Disp H_Pos 0 ~ 60 Horizontal
Position (Def 2)
Disp V_Pos 0 ~ 34 Vertical
Position (Def 12)
Disp H_Size 0 ~ 60 Horizontal
Size (Def 2)
Disp V_Size 0 ~ 34 Vertical Size
(Def 14)
Return
EXPOSURE BRIGHTNESS
SHUTTER
SENS-UP
AGC
RETURN
0 ~ 20 (Def 10)
Auto-Normal/Deblur (Def Auto)
Manual -
1/25,1/50,1/100,1/200,1/400,
1/800,1/1600, 1/3200, 1/6400,
1/12800, 1/25600
Flicker
O/x2/x4/x8/x16/x32
0 ~ 10 (Def 10)
Features
•Varifocal 2.8-12mm Lens
•Quad Technology
•2 High Power IRs - Up to 35m Range
• True Day/Night IR Cut O Filter
• UTC and Co-axitron Control
• Weatherproof IP66 Rated Metal Body
• Extra Deep Base Option
• HD 1080P
• Switchable Video Output
• Gloss Black or Pure White
Colour Options
Specication
FUNCTION SPECIFICATION
Lens 2.8-12mm Varifocal
Resolution 1080P HD
Lux 0 with LEDs on
DayNight True Day/Night Filter
IR LEDs 2
IR Range Up to 35m
Input Voltage 12V DC / 400mA
IP Rating IP66
Backlight Backlight
Compensation
Finish Gloss Black or Pure
White
Dimensions 120 Dia. x 90mm
All specications are approximate. System Q Ltd reserves the right
to change any product specications or features without notice.
Whilst every eort is made to ensure that these instructions are
complete and accurate, System Q Ltd cannot be held responsible
in any way for any losses, no matter how they arise, from errors
or omissions in these instructions, or the performance or
non-performance of the equipment that these instructions refer to.
This symbol on the products and/or accompanying
documents means that used electronic equipment
must not be mixed with general household waste.
For treatment, recovery and recycling please return
this unit to your trade supplier or local designated
collection point as dened by your local council.
WEE/CG0783SS
Other Products To Consider
External HD
NiteDevil Camera
with 2.8-12mm
Motorised Lens -
White
SEE850W
External HD
NiteDevil Camera
with 2.8-12mm
Motorised Lens -
Black
SEE850B

01246 200 000 systemq.com
2.8-12mm Eyeball with Varifocal Lens
5
BACKLIGHT OFF
HLC
BLC
WDR
Level 1 ~ 20 / Colour -
BLK/Customise/WHT/YEL/CYN/
GRN/MAG/RED/BLU
H-Pos - V-Pos - H-Size - V-Size -
Return
Weight - Low/Middle/High -
Return
DAY & NIGHT EXTERNAL
AUTO
COLOUR
B&W
IR LED O/On
Anti-Sat 1 ~ 20 Default 10(Not
used when IRs o)
External S/W Low/High
D->N Level 1 ~ 20 Default 13
N->D Level 1 ~ 20 Default 7
Delay - Low/Middle/High -
Return
IR LED O/On
Anti-Sat 1~20 Default 10(Not
used when IRs o)
AGC Threshold 1~20
AGC Margin 1 ~ 20
Delay - Low/Middle/High -
Return
IR LED O/On
Anti-Sat 1 ~20 Default 10 (Not
used when IRs o)
COLOUR AWB
Colour Gain
1~20
Return
Auto
AUTOext
PRESET (Push)
MANUAL
C-Temp 5000k/8000k/3000k
R-Gain 1 ~ 20
B-Gain 1 ~ 20
Return
DIGITAL NOISE
REDUCTION
DNR O/Low/Middle/High
IMAGE SHARPNESS
GAMMA
MIRROR
FLIP
ACE
DEFOG
CVBS/CVI/TVI/AHD 1~10 TVI
default 4
0.55/0.65/0.75/0.45
O/On
O/On
O/Low/Middle/High (Adaptive
Colour & Contrast Enhancement)
O/On Mode - Auto/Manual
Level - Low/Middle/High
Features
•Varifocal 2.8-12mm Lens
•Quad Technology
•2 High Power IRs - Up to 35m Range
• True Day/Night IR Cut O Filter
• UTC and Co-axitron Control
• Weatherproof IP66 Rated Metal Body
• Extra Deep Base Option
• HD 1080P
• Switchable Video Output
• Gloss Black or Pure White
Colour Options
Specication
FUNCTION SPECIFICATION
Lens 2.8-12mm Varifocal
Resolution 1080P HD
Lux 0 with LEDs on
DayNight True Day/Night Filter
IR LEDs 2
IR Range Up to 35m
Input Voltage 12V DC / 400mA
IP Rating IP66
Backlight Backlight
Compensation
Finish Gloss Black or Pure
White
Dimensions 120 Dia. x 90mm
All specications are approximate. System Q Ltd reserves the right
to change any product specications or features without notice.
Whilst every eort is made to ensure that these instructions are
complete and accurate, System Q Ltd cannot be held responsible
in any way for any losses, no matter how they arise, from errors
or omissions in these instructions, or the performance or
non-performance of the equipment that these instructions refer to.
This symbol on the products and/or accompanying
documents means that used electronic equipment
must not be mixed with general household waste.
For treatment, recovery and recycling please return
this unit to your trade supplier or local designated
collection point as dened by your local council.
WEE/CG0783SS
Other Products To Consider
External HD
NiteDevil Camera
with 2.8-12mm
Motorised Lens -
White
SEE850W
External HD
NiteDevil Camera
with 2.8-12mm
Motorised Lens -
Black
SEE850B

01246 200 000 systemq.com
2.8-12mm Eyeball with Varifocal Lens
6
IMAGE (Continued) PRIVACY
RETURN
O/On Zone Num (0 ~15)/
Zone Disp O/On H-Pos/V-Pos/
H-Size/V-Size/ Y-Level (1 ~ 20)
CB Level (1~20)/ Return
MOTION OFF/ON Det Window
Window Zone 0 ~3
Window Use On/O
Det H-Pos <nn> <nn> value =
position or size
Det V-Pos <nn> <nn> value =
position or size
Det H-Size <nn> <nn> value =
position or size
Det V-Size <nn> <nn> value =
position or size
Return
Det Tone 0~4
MDR etc Fill On/O
Sensitivity 0~10
Motion OSD On/O
Text Alarm On/O
Signal Out On/O
Return
SYSTEM OUTPUT Main Output Analog Out 0/1
Analog Out 0 TVI / Analog Out1
CVBS
Y Gain 0 ~ 32 Def 16 / Y Gain
not used
CB Gain 0 ~ 32 Def 12/CB Gain
not used
CR Gain 0 ~32 Def 12/CR Gain
not used
Position 0 ~ 256 Def 128 /
Position not used
Burst Freq ~ 256 Def 128 / Burst
Freq not used
Burst Gain 0 ~ 128 Def 69/ Burst
Gain not used
UCC Select0 8 Byte (Do not
change this)
720 Ex O/On
UCC Select1 not used
Exit
Features
•Varifocal 2.8-12mm Lens
•Quad Technology
•2 High Power IRs - Up to 35m Range
• True Day/Night IR Cut O Filter
• UTC and Co-axitron Control
• Weatherproof IP66 Rated Metal Body
• Extra Deep Base Option
• HD 1080P
• Switchable Video Output
• Gloss Black or Pure White
Colour Options
Specication
FUNCTION SPECIFICATION
Lens 2.8-12mm Varifocal
Resolution 1080P HD
Lux 0 with LEDs on
DayNight True Day/Night Filter
IR LEDs 2
IR Range Up to 35m
Input Voltage 12V DC / 400mA
IP Rating IP66
Backlight Backlight
Compensation
Finish Gloss Black or Pure
White
Dimensions 120 Dia. x 90mm
All specications are approximate. System Q Ltd reserves the right
to change any product specications or features without notice.
Whilst every eort is made to ensure that these instructions are
complete and accurate, System Q Ltd cannot be held responsible
in any way for any losses, no matter how they arise, from errors
or omissions in these instructions, or the performance or
non-performance of the equipment that these instructions refer to.
This symbol on the products and/or accompanying
documents means that used electronic equipment
must not be mixed with general household waste.
For treatment, recovery and recycling please return
this unit to your trade supplier or local designated
collection point as dened by your local council.
WEE/CG0783SS
Other Products To Consider
External HD
NiteDevil Camera
with 2.8-12mm
Motorised Lens -
White
SEE850W
External HD
NiteDevil Camera
with 2.8-12mm
Motorised Lens -
Black
SEE850B

01246 200 000 systemq.com
2.8-12mm Eyeball with Varifocal Lens
7
Menu Description
The following menu description gives more in depth information about the
menu options. In some instances, recommendations are made to hopefully
enhance the results. However, every installation will be different and there will
be occasions where an alternative solution may be more suitable.
IRIS ELC
ALC
Electronic Light Control - Measures
Overall Brightness
Auto Light Compensation - Measures
Peak Light Levels
ELC - Electronic Light Control - measures overall brightness of the picture and
applies to manual iris lens
ALC - Auto Light Compensation - measures peak light levels and applies to
auto iris lens
*Recommend setting Lens to ALC mode.
SYSTEM (Continued) FRAME RATE
FREQUENCY
COM.
IMAGE
RANGE
FULL/COMP/
USERFULL/
COMP/USER
COLOUR
SPACE
AUDIO MIC
COLOUR BAR
LANGUAGE
CAM TITLE
RESET ON
(push)
1080p 25p
50Hz/60Hz
COM
Cam ID 0 ~ 255 Default 0
Baudrate
2400/4800/9600/57600/115200
Set Done On (Push)
Return
FULL/COMP/USER
Oset 0 ~32 (Default 16)
Return
IMAGE RANGE
Oset 0 ~32 (Default 16)
Return
HD-CbCr/YUV/SD-CbCr
Not Used
O/On
ENG/CHN/CHN(S)/JPN/KOR
O/Right Up / Left Down
(Use up or down to select
character and left or right to
select position)
Hold down Iris+ Button for 3
seconds
EXIT Press IRIS+ to
exit
Features
•Varifocal 2.8-12mm Lens
•Quad Technology
•2 High Power IRs - Up to 35m Range
• True Day/Night IR Cut O Filter
• UTC and Co-axitron Control
• Weatherproof IP66 Rated Metal Body
• Extra Deep Base Option
• HD 1080P
• Switchable Video Output
• Gloss Black or Pure White
Colour Options
Specication
FUNCTION SPECIFICATION
Lens 2.8-12mm Varifocal
Resolution 1080P HD
Lux 0 with LEDs on
DayNight True Day/Night Filter
IR LEDs 2
IR Range Up to 35m
Input Voltage 12V DC / 400mA
IP Rating IP66
Backlight Backlight
Compensation
Finish Gloss Black or Pure
White
Dimensions 120 Dia. x 90mm
All specications are approximate. System Q Ltd reserves the right
to change any product specications or features without notice.
Whilst every eort is made to ensure that these instructions are
complete and accurate, System Q Ltd cannot be held responsible
in any way for any losses, no matter how they arise, from errors
or omissions in these instructions, or the performance or
non-performance of the equipment that these instructions refer to.
This symbol on the products and/or accompanying
documents means that used electronic equipment
must not be mixed with general household waste.
For treatment, recovery and recycling please return
this unit to your trade supplier or local designated
collection point as dened by your local council.
WEE/CG0783SS
Other Products To Consider
External HD
NiteDevil Camera
with 2.8-12mm
Motorised Lens -
White
SEE850W
External HD
NiteDevil Camera
with 2.8-12mm
Motorised Lens -
Black
SEE850B

01246 200 000 systemq.com
2.8-12mm Eyeball with Varifocal Lens
8
FOCUS ADJ OFF
ON
Focus Area Wide/Narrow/Middle
(Def Wide)
Disp Tone (Display Tone 0 Low, 1
Medium, 2 High)
Disp H_Pos 0~60 Horizontal
Position (Def 2)
Disp V_Pos 0~34 Vertical Position
(Def 12)
Disp H_Size 0~60 Horizontal Size
(Def 2)
Disp V_Size 0~34 Vertical Size
(Def 14)
Return
This camera has manual zoom and focus. After installing the camera and
selecting the appropriate video format, adjust the Zoom control by removing
the black zoom control cover and then adjusting the zoom control screw at
the bottom of the camera lens. When the area contains the appropriate view
albeit may be out of focus, adjust the focus screw for best results.
Focus Area Middle/Wide/Narrow
Select to create a focus box.
In the camera menu you can enter the Focus Adjust option and select the area
for best focus results by creating a box (Wide, Middle or Narrow) to select
the required area for focusing. Yellow is for accurate focus setting and green
for out of focus. The less green displayed, the better the focus setup is. Note
that this is a setup aid only and focusing is a manual process. Ensure option
is switched off after set up.
Disp Tone 0/1/2
Alter brightness of focus aid
Dis H_Pos
Set horizontal position of Focus Box
Dis V_Pos
Set vertical position of Focus Box
Dis H_Size
Set horizontal size of Focus Box
Dis V_Size
Set vertical size of Focus Box
RETURN
Return to the Main Menu
Features
•Varifocal 2.8-12mm Lens
•Quad Technology
•2 High Power IRs - Up to 35m Range
• True Day/Night IR Cut O Filter
• UTC and Co-axitron Control
• Weatherproof IP66 Rated Metal Body
• Extra Deep Base Option
• HD 1080P
• Switchable Video Output
• Gloss Black or Pure White
Colour Options
Specication
FUNCTION SPECIFICATION
Lens 2.8-12mm Varifocal
Resolution 1080P HD
Lux 0 with LEDs on
DayNight True Day/Night Filter
IR LEDs 2
IR Range Up to 35m
Input Voltage 12V DC / 400mA
IP Rating IP66
Backlight Backlight
Compensation
Finish Gloss Black or Pure
White
Dimensions 120 Dia. x 90mm
All specications are approximate. System Q Ltd reserves the right
to change any product specications or features without notice.
Whilst every eort is made to ensure that these instructions are
complete and accurate, System Q Ltd cannot be held responsible
in any way for any losses, no matter how they arise, from errors
or omissions in these instructions, or the performance or
non-performance of the equipment that these instructions refer to.
This symbol on the products and/or accompanying
documents means that used electronic equipment
must not be mixed with general household waste.
For treatment, recovery and recycling please return
this unit to your trade supplier or local designated
collection point as dened by your local council.
WEE/CG0783SS
Other Products To Consider
External HD
NiteDevil Camera
with 2.8-12mm
Motorised Lens -
White
SEE850W
External HD
NiteDevil Camera
with 2.8-12mm
Motorised Lens -
Black
SEE850B

01246 200 000 systemq.com
2.8-12mm Eyeball with Varifocal Lens
9
EXPOSURE BRIGHTNESS
SHUTTER
SENS-UP
AGC
RETURN
1 ~20
Auto-Normal/Deblur
Manual -
1/25,1/50,1/100,1/200,1/400,
1/800, 1/1600, 1/3200, 1/6400,
1/12800, 1/25600
Flicker
O/x2/x4/x8/x16/x32
1~20
BRIGHTNESS 1 ~ 20 (Default = 10)
Use this setting to increase brightness by opening camera iris. Useful for
improving night time viewing by using in conjunction with the Sens-Up option.
However be aware to consider possible effects when there is strong sunlight
that if setting brightness to high it may cause the picture to white out.
*Recommendation is to set brightness to 15
SHUTTER Auto/Manual
1/25,1/50,1/100,1/200,1/400, 1/800,
1/1600,1/3200,1/6400,1/12800,1/25600,
Flicker
Shutter speed changes allow you to freeze moving objects without ghosting
but reduce the amount of available light the faster the shutter operates. At
night the slower the shutter speed the more light is available. The Flicker
option sets the shutter speed at 1/250 that synchronises with fl uorescent tubes
so that the pulsing effect is minimised.
*Recommendation is to leave this in Auto.
SENSUP Off/x2/x4/x8/x16/x32
The SensUp option allows the shutter speed to be reduced allowing
additional light to be captured. Increasing brightness helps night time viewing
(see BRIGHTNESS setting above). If set too high and Sensup is slowing
shutter speed down to a lower speed than any movement speed, ghosting
can occur. *Recommend that Sensup is switched on to x2 for areas with some
light at night to x16 when pitch black.
AGC 1 ~ 20 (Default = 10)
For better performance in low light conditions the AGC (Automatic Gain
Control) can be increased. This has the effect of making the picture brighter
but it may also add more noise as it amplifi es all aspects of the video signal.
*Recommend AGC is decreased below 10 if Sensup is increased over x2.
RETURN
Return to main menu.
Features
•Varifocal 2.8-12mm Lens
•Quad Technology
•2 High Power IRs - Up to 35m Range
• True Day/Night IR Cut O Filter
• UTC and Co-axitron Control
• Weatherproof IP66 Rated Metal Body
• Extra Deep Base Option
• HD 1080P
• Switchable Video Output
• Gloss Black or Pure White
Colour Options
Specication
FUNCTION SPECIFICATION
Lens 2.8-12mm Varifocal
Resolution 1080P HD
Lux 0 with LEDs on
DayNight True Day/Night Filter
IR LEDs 2
IR Range Up to 35m
Input Voltage 12V DC / 400mA
IP Rating IP66
Backlight Backlight
Compensation
Finish Gloss Black or Pure
White
Dimensions 120 Dia. x 90mm
All specications are approximate. System Q Ltd reserves the right
to change any product specications or features without notice.
Whilst every eort is made to ensure that these instructions are
complete and accurate, System Q Ltd cannot be held responsible
in any way for any losses, no matter how they arise, from errors
or omissions in these instructions, or the performance or
non-performance of the equipment that these instructions refer to.
This symbol on the products and/or accompanying
documents means that used electronic equipment
must not be mixed with general household waste.
For treatment, recovery and recycling please return
this unit to your trade supplier or local designated
collection point as dened by your local council.
WEE/CG0783SS
Other Products To Consider
External HD
NiteDevil Camera
with 2.8-12mm
Motorised Lens -
White
SEE850W
External HD
NiteDevil Camera
with 2.8-12mm
Motorised Lens -
Black
SEE850B

01246 200 000 systemq.com
2.8-12mm Eyeball with Varifocal Lens
10
BACKLIGHT OFF
HLC
BLC
WDR
Level 1 ~ 20 / Colour -
BLK/Customise/WHT/YEL/CYN/
GRN/MAG/RED/BLU
H-Pos - V-Pos - H-Size - V-Size -
Return
Weight-Low/Middle/High -
Return
Backlight Compensation, when set, can balance light levels during day and
night so that light hitting objects viewed is evenly spread across the picture.
There are 3 options: HLC, BLC and WDR that can be selected.
HLC
(High Level Backlight Compensation)
Level 1 ~ 20/Mode - All Day/Night Only
HLC is high level backlight compensation that will darken a bright area e.g
car headlights. This can be set for all day or night only. The lower the level
the more compensation is applied. Note that using the night option may be
best as daytime pictures generally give a more even spread of light apart
from sunlight issues. *Recommend only to use on Night Only if bright lights
are causing complete video loss.
BLC
(Backlight Compensation)
H-Pos - V-Pos - H-Size - V-Size
BLC is the standard setting for low level light differences. Select an area
where BLC is required. Using the H-Pos (Horizontal Position) and V-Pos
(Vertical Position) followed by H-Size (Horizontal Size) and V-Size (Vertical
Size) create a box where light balancing is required.
WDR
(Wide Dynamic Range)
Weight - Low/Middle/High
WDR is used for surveillance applications where there is a large difference
in foreground and background light levels. This is typical in homes and offi ce
buildings that have large areas of glass with direct sunlight outside. Without
the option switched on, views by cameras looking through windows may not
give good reproduction outside. Also where there are areas of shadow and
bright sunlight, the WDR option helps to balance light levels. *Recommend
using WDR where balancing light levels in warehouses or large buildings is
diffi cult.
Return
Return to Main Menu.
Features
•Varifocal 2.8-12mm Lens
•Quad Technology
•2 High Power IRs - Up to 35m Range
• True Day/Night IR Cut O Filter
• UTC and Co-axitron Control
• Weatherproof IP66 Rated Metal Body
• Extra Deep Base Option
• HD 1080P
• Switchable Video Output
• Gloss Black or Pure White
Colour Options
Specication
FUNCTION SPECIFICATION
Lens 2.8-12mm Varifocal
Resolution 1080P HD
Lux 0 with LEDs on
DayNight True Day/Night Filter
IR LEDs 2
IR Range Up to 35m
Input Voltage 12V DC / 400mA
IP Rating IP66
Backlight Backlight
Compensation
Finish Gloss Black or Pure
White
Dimensions 120 Dia. x 90mm
All specications are approximate. System Q Ltd reserves the right
to change any product specications or features without notice.
Whilst every eort is made to ensure that these instructions are
complete and accurate, System Q Ltd cannot be held responsible
in any way for any losses, no matter how they arise, from errors
or omissions in these instructions, or the performance or
non-performance of the equipment that these instructions refer to.
This symbol on the products and/or accompanying
documents means that used electronic equipment
must not be mixed with general household waste.
For treatment, recovery and recycling please return
this unit to your trade supplier or local designated
collection point as dened by your local council.
WEE/CG0783SS
Other Products To Consider
External HD
NiteDevil Camera
with 2.8-12mm
Motorised Lens -
White
SEE850W
External HD
NiteDevil Camera
with 2.8-12mm
Motorised Lens -
Black
SEE850B

01246 200 000 systemq.com
2.8-12mm Eyeball with Varifocal Lens
11
DAY & NIGHT EXTERNAL
AUTO
COLOUR
B&W
IR LED O/On
Anti-Sat 1 ~ 20 (Not used when
IRs o)
External S/W Low/High
D->N Level 1 ~ 20 Default 13
N->D Level 1 ~ 20 Default 7
Delay - Low/Middle/High - Return
IR LED O/On
Anti-Sat. 1~20 (Not used when IRs
o  )
AGC Threshold 1 ~ 20
AGC Margin 1 ~ 20
Delay - Low/Middle/High - Return
IR LED O/On
Anti-Sat 1 ~ 20 (Not used when
IRs o)
Return
Day & Night menu controls light settings and predominantly provides options
for using the cameras Infra-Red facilities. There are four sub-options namely
External, Auto, Colour and Black & White.
EXTERNAL
This option does not use the internal CDS sensor to measure the available
light. With cameras using their own IR light source, this option can give
the best results. Note that this option has a manual adjustment for setting
IR switch on according to lux level from day to night and from night to day,
plus an option for applying a delay factor. This stops switching until a pre-
determined lux level remains constant. There is also the option to switch off
the IRs. *Recommend to try this option if Auto does not give required results.
AUTO
The standard Auto function uses the internal CDS to measure available light.
This uses AGC (Automatic Gain Control) and Anti Saturation to measure
picture quality before switching which is used in conjunction with a pre-
determined time interval when lux levels remain constant. There is also the
option to switch off the camera IRs.
COLOUR
This option will remain in colour mode day and night. There are no sub menu
settings. This will only be applicable when light levels at night allow the
camera to continue working at 4 lux or higher.
B&W
When this option is selected the camera will remain in black and white
mode, day and night. The only sub menus available are Anti Saturation and
the option to switch off the camera IRs.
Features
•Varifocal 2.8-12mm Lens
•Quad Technology
•2 High Power IRs - Up to 35m Range
• True Day/Night IR Cut O Filter
• UTC and Co-axitron Control
• Weatherproof IP66 Rated Metal Body
• Extra Deep Base Option
• HD 1080P
• Switchable Video Output
• Gloss Black or Pure White
Colour Options
Specication
FUNCTION SPECIFICATION
Lens 2.8-12mm Varifocal
Resolution 1080P HD
Lux 0 with LEDs on
DayNight True Day/Night Filter
IR LEDs 2
IR Range Up to 35m
Input Voltage 12V DC / 400mA
IP Rating IP66
Backlight Backlight
Compensation
Finish Gloss Black or Pure
White
Dimensions 120 Dia. x 90mm
All specications are approximate. System Q Ltd reserves the right
to change any product specications or features without notice.
Whilst every eort is made to ensure that these instructions are
complete and accurate, System Q Ltd cannot be held responsible
in any way for any losses, no matter how they arise, from errors
or omissions in these instructions, or the performance or
non-performance of the equipment that these instructions refer to.
This symbol on the products and/or accompanying
documents means that used electronic equipment
must not be mixed with general household waste.
For treatment, recovery and recycling please return
this unit to your trade supplier or local designated
collection point as dened by your local council.
WEE/CG0783SS
Other Products To Consider
External HD
NiteDevil Camera
with 2.8-12mm
Motorised Lens -
White
SEE850W
External HD
NiteDevil Camera
with 2.8-12mm
Motorised Lens -
Black
SEE850B

01246 200 000 systemq.com
2.8-12mm Eyeball with Varifocal Lens
12
Return
Return to the Main Menu.
COLOUR AWB Auto
Colour Gain 1 ~ 20
(Default 13)
Return
AUTOext / Preset (Push)
Colour Gain 1 ~ 20 Default
13
Return
MANUAL
C-Temp
5000k/8000k/3000k
R-Gain 1 ~20 (Default 10)
B-Gain 1 ~20 (Default 10)
Return
This feature automatically adjusts the colour settings in the camera to match
the type of light available, so that white and other colours appear as natural
as possible.
AUTO
This option automatically sets white balance.
AUTOext
This option is generally used to set white balance when the camera is used
externally.
PRESET(Push) Press IRIS+ or joystick centre button down
This option allows you to set white balance using current light levels. Settings
will only change when you press IRIS+ or joystick centre down.
MANUAL
Use this option to manually balance light levels. Note that the manual option
is used for a static light environment and generally suitable for cameras
installed indoors using constant artifi cial light.
C-Temp 5000K/8000K/3000K
R-Gain 1 ~ 20 (Default 10) Sets Red Gain
B-Gain 1 ~ 20 (Default 10) Sets Blue Gain
Return
RETURN
Return to the Main Menu.
Features
•Varifocal 2.8-12mm Lens
•Quad Technology
•2 High Power IRs - Up to 35m Range
• True Day/Night IR Cut O Filter
• UTC and Co-axitron Control
• Weatherproof IP66 Rated Metal Body
• Extra Deep Base Option
• HD 1080P
• Switchable Video Output
• Gloss Black or Pure White
Colour Options
Specication
FUNCTION SPECIFICATION
Lens 2.8-12mm Varifocal
Resolution 1080P HD
Lux 0 with LEDs on
DayNight True Day/Night Filter
IR LEDs 2
IR Range Up to 35m
Input Voltage 12V DC / 400mA
IP Rating IP66
Backlight Backlight
Compensation
Finish Gloss Black or Pure
White
Dimensions 120 Dia. x 90mm
All specications are approximate. System Q Ltd reserves the right
to change any product specications or features without notice.
Whilst every eort is made to ensure that these instructions are
complete and accurate, System Q Ltd cannot be held responsible
in any way for any losses, no matter how they arise, from errors
or omissions in these instructions, or the performance or
non-performance of the equipment that these instructions refer to.
This symbol on the products and/or accompanying
documents means that used electronic equipment
must not be mixed with general household waste.
For treatment, recovery and recycling please return
this unit to your trade supplier or local designated
collection point as dened by your local council.
WEE/CG0783SS
Other Products To Consider
External HD
NiteDevil Camera
with 2.8-12mm
Motorised Lens -
White
SEE850W
External HD
NiteDevil Camera
with 2.8-12mm
Motorised Lens -
Black
SEE850B

01246 200 000 systemq.com
2.8-12mm Eyeball with Varifocal Lens
13
DIGITAL NOISE
REDUCTION
DNR O/Low/Middle/High
DNR Off/Low/Middle/High
Digital Noise Reduction is generally applied when the Sens-Up feature is used
to improve night time views in low light conditions. Using the Sens-Up option
slows the shutter speed but this increases noise and causes grainy picture
effects. DNR helps to minimise this effect. The options low, medium and high,
apply different levels of noise reduction and therefore have to be tested to
gain the best result as light levels will be different at every site and location.
*Recommend to leave off even when Sense-Up is on. If grainy picture is
created then test starting on low and leave camera on the best setting.
IMAGE SHARPNESS
GAMMA
MIRROR
FLIP
ACE
DEFOG
PRIVACY
RETURN
CVBS/CVI/TVI/AHD 1 ~ 10
TVI Default 4
0.55/0.65/0.75/0.45
O/On
O/On
O/Low/Middle/High
(Adaptive Colour &
Contrast Enhancement)
O/On Mode - Auto/
Manual
Level - Low/Middle/High
O/On Zone Num
(0 ~15) / Zone Disp O/ On
H-Pos/V-Pos/H-Size/V-Size/
Y-Level (1~20)/CR Level
(1~20)
CB Level (1~20)/Return
IMAGE
The Image menu covers a variety of options including sharpness, mirror,
defog, shading and privacy masking facilities.
Sharpness 1 ~ 10
Depending on the camera format selected, the format/s will be in dark type
for adjustment.
The sharpness control is done by digital correction and the best way to set
this option is to set level to maximum of 10, then fl ick back to 1, to see the
difference. Then adjust to display sharpest picture without displaying heavy
black lines around subjects.
Gamma 0.55/0.65/0.75/0.45 (Default 0.55)
Gamma correction controls and adjusts the overall brightness of an image.
*Recommend trying each option and select the best quality picture.
Features
•Varifocal 2.8-12mm Lens
•Quad Technology
•2 High Power IRs - Up to 35m Range
• True Day/Night IR Cut O Filter
• UTC and Co-axitron Control
• Weatherproof IP66 Rated Metal Body
• Extra Deep Base Option
• HD 1080P
• Switchable Video Output
• Gloss Black or Pure White
Colour Options
Specication
FUNCTION SPECIFICATION
Lens 2.8-12mm Varifocal
Resolution 1080P HD
Lux 0 with LEDs on
DayNight True Day/Night Filter
IR LEDs 2
IR Range Up to 35m
Input Voltage 12V DC / 400mA
IP Rating IP66
Backlight Backlight
Compensation
Finish Gloss Black or Pure
White
Dimensions 120 Dia. x 90mm
All specications are approximate. System Q Ltd reserves the right
to change any product specications or features without notice.
Whilst every eort is made to ensure that these instructions are
complete and accurate, System Q Ltd cannot be held responsible
in any way for any losses, no matter how they arise, from errors
or omissions in these instructions, or the performance or
non-performance of the equipment that these instructions refer to.
This symbol on the products and/or accompanying
documents means that used electronic equipment
must not be mixed with general household waste.
For treatment, recovery and recycling please return
this unit to your trade supplier or local designated
collection point as dened by your local council.
WEE/CG0783SS
Other Products To Consider
External HD
NiteDevil Camera
with 2.8-12mm
Motorised Lens -
White
SEE850W
External HD
NiteDevil Camera
with 2.8-12mm
Motorised Lens -
Black
SEE850B

01246 200 000 systemq.com
2.8-12mm Eyeball with Varifocal Lens
14
Mirror Off/On
This option changes a left handed view to a right handed view if switched on.
Flip Off/On
This option turns a view upside down. This option is generally used with the
Mirror function.
ACE Off/On/Middle/High
Adaptive Colour & Contrast Enhancement (ACE) is an automated option for
adjusting colour and contrast as light levels change throughout the day. Low,
middle or high options are available. *Recommend setting option to Low.
DEFOG Off/On
Mode - Auto - Level - Low/Middle/High
Manual - Level - Low/Middle/High
The defog option can be used to improve the captured image in poor
weather conditions such as smog, fog or smoke. Three levels of optimisation
can be applied, low, middle or high. This option is useful to stabilise rapid
fl uctuating light levels. *Recommend setting this option to On.
PRIVACY Off/On
Zone Num (0~15)
This function allows the creation of up to 16 coloured areas to be created to
provide privacy masking.
Done Disp Off/On
The Zone Display allows you to switch on and off the zone number.
H-Pos/V-Pos/H-Size/V-Size
Each area can be positioned using the H-Pos (Horizontal Position), V-Pos
(Vertical Position) and sized using the H-Size (Horizontal Size) and V-Size
(Vertical Size) options. The Zone Display allows you to switch on and off the
zone number.
Y-Level (1~20)
CR Level (1~20)
CB Level (1~20)
The Y-Level is the colour hue for privacy masking and the CR Level
(Chrominance Red) and CB Level (Chrominance Blue) are used to create the
required colour.
Features
•Varifocal 2.8-12mm Lens
•Quad Technology
•2 High Power IRs - Up to 35m Range
• True Day/Night IR Cut O Filter
• UTC and Co-axitron Control
• Weatherproof IP66 Rated Metal Body
• Extra Deep Base Option
• HD 1080P
• Switchable Video Output
• Gloss Black or Pure White
Colour Options
Specication
FUNCTION SPECIFICATION
Lens 2.8-12mm Varifocal
Resolution 1080P HD
Lux 0 with LEDs on
DayNight True Day/Night Filter
IR LEDs 2
IR Range Up to 35m
Input Voltage 12V DC / 400mA
IP Rating IP66
Backlight Backlight
Compensation
Finish Gloss Black or Pure
White
Dimensions 120 Dia. x 90mm
All specications are approximate. System Q Ltd reserves the right
to change any product specications or features without notice.
Whilst every eort is made to ensure that these instructions are
complete and accurate, System Q Ltd cannot be held responsible
in any way for any losses, no matter how they arise, from errors
or omissions in these instructions, or the performance or
non-performance of the equipment that these instructions refer to.
This symbol on the products and/or accompanying
documents means that used electronic equipment
must not be mixed with general household waste.
For treatment, recovery and recycling please return
this unit to your trade supplier or local designated
collection point as dened by your local council.
WEE/CG0783SS
Other Products To Consider
External HD
NiteDevil Camera
with 2.8-12mm
Motorised Lens -
White
SEE850W
External HD
NiteDevil Camera
with 2.8-12mm
Motorised Lens -
Black
SEE850B

01246 200 000 systemq.com
2.8-12mm Eyeball with Varifocal Lens
15
The pictures below show an area that has been masked, before and after.
RETURN
Return to the Main Menu.
MOTION O/On Det Window
Window Zone 0 ~ 3
Window Use On/O
Det H-Pos<nn> <nn>
value = position or size
Det V-Pos<nn> <nn>
value = position or size
Det H-Size<nn> <nn>
value = position or size
Det V-Size<nn> <nn>
value = position or size
Return
Det Tone 0~4
MDRect Fill On/O
Sensitivity 0 ~ 10
Motion OSD On/O
Text Alarm On/O
Signal Out O/On
Return
MOTION Off/On
The motion option when switched on allows you to create up to four areas
in the picture and as motion is detected in these areas, the areas will be
displayed with red moving boxes.
DET WINDOW Enter to select window number
Window Zone 0~3
Window Use On/Off
Det H-Pos <nn> Set horizontal position
Det V-Pos <nn> Set vertical position
Det H-Size <nn> Set horizontal size
Det V-Size <nn> Set vertical size
Features
•Varifocal 2.8-12mm Lens
•Quad Technology
•2 High Power IRs - Up to 35m Range
• True Day/Night IR Cut O Filter
• UTC and Co-axitron Control
• Weatherproof IP66 Rated Metal Body
• Extra Deep Base Option
• HD 1080P
• Switchable Video Output
• Gloss Black or Pure White
Colour Options
Specication
FUNCTION SPECIFICATION
Lens 2.8-12mm Varifocal
Resolution 1080P HD
Lux 0 with LEDs on
DayNight True Day/Night Filter
IR LEDs 2
IR Range Up to 35m
Input Voltage 12V DC / 400mA
IP Rating IP66
Backlight Backlight
Compensation
Finish Gloss Black or Pure
White
Dimensions 120 Dia. x 90mm
All specications are approximate. System Q Ltd reserves the right
to change any product specications or features without notice.
Whilst every eort is made to ensure that these instructions are
complete and accurate, System Q Ltd cannot be held responsible
in any way for any losses, no matter how they arise, from errors
or omissions in these instructions, or the performance or
non-performance of the equipment that these instructions refer to.
This symbol on the products and/or accompanying
documents means that used electronic equipment
must not be mixed with general household waste.
For treatment, recovery and recycling please return
this unit to your trade supplier or local designated
collection point as dened by your local council.
WEE/CG0783SS
Other Products To Consider
External HD
NiteDevil Camera
with 2.8-12mm
Motorised Lens -
White
SEE850W
External HD
NiteDevil Camera
with 2.8-12mm
Motorised Lens -
Black
SEE850B

01246 200 000 systemq.com
2.8-12mm Eyeball with Varifocal Lens
16
Each area can be positioned using the H-Pos
(horizontal position), V-Pos (vertical position) and
sized using the H-Size (horizontal size) and V-Size
(vertical size) options.
RETURN
DET TONE 0~4 Sets the background tone to enable the motion
detect area to be more or less prominent.
MIDRECT FILL
On/Off Allows the switching on or off of the selected zone.
SENSITIVITY
0 ~ 10 Sets the sensitivity of the motion detection.
MOTION OSD
On/Off Switch Motion on Screen Display on or off
TEXT ALARM
On/Off Switch Motion Text Alarm on or off.
RETURN
SYSTEM OUTPUT
FRAME RATE
FREQUENCY
COM.
Main Output Analog Out 0 / Out
1
Analog Out 0 TVI/AHD/CVI/Analog
Out1 CVBS
Y Gain 0 ~ 32 Def 16/ Y gain not used
CB Gain 0 ~ 32 Def 12 / CB gain not
used
CR Gain 0 ~ 32 Def 12/ CR Gain not
used
Position 0 ~ 256 Def 128 / Position
not used
Burst Freq 0 ~ 256 Def 128 / Burst
Freq not used
Burst Gain 0 ~ 128 Def 69 / Burst Gain
not used
UCC Select 0 8 Byte (Do not change
this)
720 EX O/On
UCC Select1 not used
Exit
1080 25P
50Hz/60Hz
COM
Features
•Varifocal 2.8-12mm Lens
•Quad Technology
•2 High Power IRs - Up to 35m Range
• True Day/Night IR Cut O Filter
• UTC and Co-axitron Control
• Weatherproof IP66 Rated Metal Body
• Extra Deep Base Option
• HD 1080P
• Switchable Video Output
• Gloss Black or Pure White
Colour Options
Specication
FUNCTION SPECIFICATION
Lens 2.8-12mm Varifocal
Resolution 1080P HD
Lux 0 with LEDs on
DayNight True Day/Night Filter
IR LEDs 2
IR Range Up to 35m
Input Voltage 12V DC / 400mA
IP Rating IP66
Backlight Backlight
Compensation
Finish Gloss Black or Pure
White
Dimensions 120 Dia. x 90mm
All specications are approximate. System Q Ltd reserves the right
to change any product specications or features without notice.
Whilst every eort is made to ensure that these instructions are
complete and accurate, System Q Ltd cannot be held responsible
in any way for any losses, no matter how they arise, from errors
or omissions in these instructions, or the performance or
non-performance of the equipment that these instructions refer to.
This symbol on the products and/or accompanying
documents means that used electronic equipment
must not be mixed with general household waste.
For treatment, recovery and recycling please return
this unit to your trade supplier or local designated
collection point as dened by your local council.
WEE/CG0783SS
Other Products To Consider
External HD
NiteDevil Camera
with 2.8-12mm
Motorised Lens -
White
SEE850W
External HD
NiteDevil Camera
with 2.8-12mm
Motorised Lens -
Black
SEE850B

01246 200 000 systemq.com
2.8-12mm Eyeball with Varifocal Lens
17
IMAGE RANGE
FULL/COMP/
USER
COLOUR SPACE
AUDIO MIC
COLOUR BAR
LANGUAGE
CAM TITLE
RESET ON (Push)
Return
Cam ID 0 ~ 255 Default 0
Baudrate 2400/4800/9600/57600/
115200/
Set Done On (Push)
Return
FULL/COMP/USER
Oset 0 ~32 (Default 16)
Return
IMAGE RANGE
Oset 0 ~ 32 (Default 16)
Return
HD-CbCr/YUV/SD-CbCr
(Not Used)
O/On
ENG/CHN/CHN(S)/JPN/KOR
O/Right Up /Left Down
(Use up or down to select character
and left or right to select position)
Hold down Iris+ button for 3 seconds
The SYSTEM menu provides a number of general facilities. These include
selecting the correct camera format, setting a camera identication number
and baud rate for RS485 connection, resolution mode, frame rate and colour
standard, language, test colour bar, camera title and camera reset option.
OUTPUT Main Output Analog Out 0/1 (Out 0 = HD Out 1 = CVBS)
Analog Out 0 TVI (Select TVI/AHD/CVI)
Y Gain 0 ~ 32 Default 16 Yellow Gain
CB Gain 0 ~ 32 Default 12 Blue Gain
CR Gain 0 ~ 32 Default 12 Red Gain
Position 0 ~ 256 Default 128 Position
Burst Freq 0 ~ 256 Default 128 Burst Frequency
Burst Gain 0 ~ 128 Default 69 Burst Gain
UCC Select 0 8 Byte (Do not change this)
720 EX O/On
UCC Select1 not used
Exit
Analog Out1 CVBS/TVI /OFF
Analog Out1 CVBS
Return
Features
•Varifocal 2.8-12mm Lens
•Quad Technology
•2 High Power IRs - Up to 35m Range
• True Day/Night IR Cut O Filter
• UTC and Co-axitron Control
• Weatherproof IP66 Rated Metal Body
• Extra Deep Base Option
• HD 1080P
• Switchable Video Output
• Gloss Black or Pure White
Colour Options
Specication
FUNCTION SPECIFICATION
Lens 2.8-12mm Varifocal
Resolution 1080P HD
Lux 0 with LEDs on
DayNight True Day/Night Filter
IR LEDs 2
IR Range Up to 35m
Input Voltage 12V DC / 400mA
IP Rating IP66
Backlight Backlight
Compensation
Finish Gloss Black or Pure
White
Dimensions 120 Dia. x 90mm
All specications are approximate. System Q Ltd reserves the right
to change any product specications or features without notice.
Whilst every eort is made to ensure that these instructions are
complete and accurate, System Q Ltd cannot be held responsible
in any way for any losses, no matter how they arise, from errors
or omissions in these instructions, or the performance or
non-performance of the equipment that these instructions refer to.
This symbol on the products and/or accompanying
documents means that used electronic equipment
must not be mixed with general household waste.
For treatment, recovery and recycling please return
this unit to your trade supplier or local designated
collection point as dened by your local council.
WEE/CG0783SS
Other Products To Consider
External HD
NiteDevil Camera
with 2.8-12mm
Motorised Lens -
White
SEE850W
External HD
NiteDevil Camera
with 2.8-12mm
Motorised Lens -
Black
SEE850B

01246 200 000 systemq.com
2.8-12mm Eyeball with Varifocal Lens
18
FRAME RATE 1080P 25P/720 25P/720 (crop) 50P (Select Camera
Frame Rate) Sets the camera output mode. 1080p is
default.
FREQ 50Hz/60Hz (Cycles per second)
COM. Cam ID 1 (Set ID number in camera between 0 & 255)
Baud Rate 2400/4800/9600/57600/115200
Set Done (Press Iris+ button)
Return
IMAGE RANGE Full/Comp/User
Oset 1 ~ 32 (Default = 16)
COLOUR SPACE HD-CbCR (High Denition Chrominance Blue and Red)
YUV (Allows greyscale adjustment (Y = luminance UV
= colour)
SD-CbCr (Standard Denition Chrominance Blue and
Red)
AUDIO MIC Not used
COLOUR BAR O/On (Useful for testing camera colour quality)
LANGUAGE ENG/CHN/CHN(S)/JPN/KOR (Select language
required)
CAM TITLE O/Right Up / Left Down (Enter Camera Title)
(Use up or down to select character and left or right to select position) Hold
down Iris+ button for 3 seconds
RESET ON(Push) Press IRIS+ or joystick centre button down
RETURN
Features
•Varifocal 2.8-12mm Lens
•Quad Technology
•2 High Power IRs - Up to 35m Range
• True Day/Night IR Cut O Filter
• UTC and Co-axitron Control
• Weatherproof IP66 Rated Metal Body
• Extra Deep Base Option
• HD 1080P
• Switchable Video Output
• Gloss Black or Pure White
Colour Options
Specication
FUNCTION SPECIFICATION
Lens 2.8-12mm Varifocal
Resolution 1080P HD
Lux 0 with LEDs on
DayNight True Day/Night Filter
IR LEDs 2
IR Range Up to 35m
Input Voltage 12V DC / 400mA
IP Rating IP66
Backlight Backlight
Compensation
Finish Gloss Black or Pure
White
Dimensions 120 Dia. x 90mm
All specications are approximate. System Q Ltd reserves the right
to change any product specications or features without notice.
Whilst every eort is made to ensure that these instructions are
complete and accurate, System Q Ltd cannot be held responsible
in any way for any losses, no matter how they arise, from errors
or omissions in these instructions, or the performance or
non-performance of the equipment that these instructions refer to.
This symbol on the products and/or accompanying
documents means that used electronic equipment
must not be mixed with general household waste.
For treatment, recovery and recycling please return
this unit to your trade supplier or local designated
collection point as dened by your local council.
WEE/CG0783SS
Other Products To Consider
External HD
NiteDevil Camera
with 2.8-12mm
Motorised Lens -
White
SEE850W
External HD
NiteDevil Camera
with 2.8-12mm
Motorised Lens -
Black
SEE850B

01246 200 000 systemq.com
2.8-12mm Eyeball with Varifocal Lens
19
Sensor SONY 2.1MP Video Outputs TVI, AHD, CVI &
Analogue
Resolution
1080p
1920(H) x
1080(V) @25fps
Independent
CVBS
CVBS 700TVL
separate
output*
Day/Night Mechanical True
Day/Night
IR Power 2 x H/Powered
IR LEDs>30m
Signal System PAL/NTSC Operating
Temp.
-10°C ~ +50°C
Min.
Illumination
B&W .001 Lux @
(F2.0,AGC & DSS
on)
Colour 0.5 Lux @
(F2. 0,AGC on)
Power/Current
Power Supply
12vDC 400mA
IRs on
>12vDC 600mA
regulated
Mounting Ceiling and Wall
Mounting
Lens 2.19MP 2.8mm ~ 12mm
Manual Varifocal
Menu OSD direct and
via coaxitron
Backlight HLC, BLC, WDR,
o 
WDR True Wide
Dynamic Range
option
Dimensions 85mm(H) x
120mm (Dia.)
S/N Ratio >52dB (AGC o) Build Cast Alloy Body
Colour SEE820W White
SEE820B Black
IP Rating IP66
NiteDevil Sens-Up option
included
Extra Deepbase Additional
for cable
management
Privacy
Masking
16 areas for
Privacy Masking
2D+3D NR Low/Middle/
High/O
Dual Front
Glass
Dual glass
to reduce IR
reection
AGC Automatic/
Selectable
Features
•Varifocal 2.8-12mm Lens
•Quad Technology
•2 High Power IRs - Up to 35m Range
• True Day/Night IR Cut O Filter
• UTC and Co-axitron Control
• Weatherproof IP66 Rated Metal Body
• Extra Deep Base Option
• HD 1080P
• Switchable Video Output
• Gloss Black or Pure White
Colour Options
Specication
FUNCTION SPECIFICATION
Lens 2.8-12mm Varifocal
Resolution 1080P HD
Lux 0 with LEDs on
DayNight True Day/Night Filter
IR LEDs 2
IR Range Up to 35m
Input Voltage 12V DC / 400mA
IP Rating IP66
Backlight Backlight
Compensation
Finish Gloss Black or Pure
White
Dimensions 120 Dia. x 90mm
All specications are approximate. System Q Ltd reserves the right
to change any product specications or features without notice.
Whilst every eort is made to ensure that these instructions are
complete and accurate, System Q Ltd cannot be held responsible
in any way for any losses, no matter how they arise, from errors
or omissions in these instructions, or the performance or
non-performance of the equipment that these instructions refer to.
This symbol on the products and/or accompanying
documents means that used electronic equipment
must not be mixed with general household waste.
For treatment, recovery and recycling please return
this unit to your trade supplier or local designated
collection point as dened by your local council.
WEE/CG0783SS
Other Products To Consider
External HD
NiteDevil Camera
with 2.8-12mm
Motorised Lens -
White
SEE850W
External HD
NiteDevil Camera
with 2.8-12mm
Motorised Lens -
Black
SEE850B