System Q NiteDevil 24C IPCND705 User manual

© 2022 System Q Ltd
NiteDevil 24C Camera
IPCND705
Get Full Colour Images at Night !!
Instruction Manual
NiteDevil.com

IPCND705
I
© 2022 System Q Ltd
NiteDevil.com
Table of Contents
Part 1 Introduction 1
1 Key Features .................................................................................................................. 1
2 Essential Tools and ZipFinder ......................................................................................... 1
Part 2 Connections 3
Part 3 Mounting 4
Part 4 SD Card 4
Part 5 Setup Options 5
1 PoE ZIP NVR ................................................................................................................... 5
2 Non-PoE ZIP NVR ............................................................................................................ 6
Part 6 How to Login via Browser 7
Part 7 Browser Menu Settings 9
1 IPCND705 ........................................................................................................................ 9
Part 8 Customising the Day / Night Setting to IR 16
Part 9 Turn off Deterrence LED 17
Part 10 AI Features 18
1 PD & VD = Pedestrian Detection and Vehicle Detection ............................................... 18
2 PID = Perimeter Intrusion Detection ............................................................................. 21
3 LCD = Line Crossing Detection ..................................................................................... 23
Part 11 Extra Resources 25
1 ZipNVR.com Website .................................................................................................... 25
2 Adding IP Cameras to a ZIP recorder ........................................................................... 25
3 ZIP Firmware ................................................................................................................ 25
Part 12 General Maintenance 26
Part 13 Specification 27
1 IPCND705 ...................................................................................................................... 27
Part 14 Conditions 28
Index 29

Introduction
© 2022 System Q Ltd
1
NiteDevil.com
Introduction
The all new NiteDevil® 24C can stay in fullcolour around the clock using the minimal amount of
naturallight to produce superb fullcolour images. It really is a game changer in performance and
should be used as a part of any CCTV systemrequiring full colour images in key areas around
entrances etc.
With built in dualIR and white light you can choose how the camera best works in your install.
Using white light to give visualwarning or using IR illumination to get a more discreet set up.
A built in microphone means you can see and hear what's happening, recording the audio &
video on your NVR for the best possible CCTV evidence.
Dual PoE and 12V means you can power and connect the camera to POE NVRs in seconds
using one simple CAT5/6 cable for video, power and audio. Ifyour systemdoesn't support PoE
use the 12V input or a PoE injector such as our POE200.
1.1 Key Features
oFullColour 24/7
oSees in Low Light
oNiteDevil® Tech
o2MP or 5MP
oStunning Images
oONVIF
oWhite or Grey Case
oIP66 In & Outdoor
oDual PoE/12V
oDual IR & White Light
oWide-Angle 3.6mm
oBuilt-in Mic
oMetalCase
oMotion Detect
oPicture Flip
1.2 Essential Tools and ZipFinder
To installthis product you will need:
· Laptop / Windows PC
· Screwdriver
· Drill
· ZIP NVR or DVR
· PoE Switch / 12V DC power supply
· Ethernet CAT5/5e/6 Cable

23/03/2022
IPCND705
2NiteDevil.com
ZipFinder - IP Camera Configuration Tool
ZipFinder is a Windows PC software for discovering
and configuring IP cameras a network.
Use ZipFinder on non-PoE installs, to help problem
solving issues such as forgotten or unknown
IP Addresses.
To download visit ZipNVR.com

Connections
© 2022 System Q Ltd
3
NiteDevil.com
Connections
Powering the camera
Option 1 - Power the camera from12V DC (via the 2.1mm DC Socket), the current
consumption is 400mA.
The camera is polarity sensitive so connections must be correctly made.
Option 2 - Power the camera using a PoE 48V RJ45 Socket
When connecting ZIP PoE NVR plug the camera directly into the NVRs built in PoE switch.
The camera should automatically become visible after being connected for approximately 1
minute.

23/03/2022
IPCND705
4NiteDevil.com
Mounting
SD Card
The SD Card can be found on the rear ofthe eyeball, a smallgasket will need to be removed to
install the SD card.
For localrecording on the camera itself an SD card must be installed.
Recording time willvary dependent upon: SD card size and encoding settings
32GB SD Card 31 hours
64GB SD Card 62 hours
128GB SD Card (MAX) 124 hours
The camera can be set to only record when triggered via motion detection, alarm input or AI
smart, this maximises the recording time achievable.
Remove power fromthe camera when inserting / removing the SD card.

Setup Options
© 2022 System Q Ltd
5
NiteDevil.com
Setup Options
5.1 PoE ZIP NVR
When connecting to a ZIP PoE NVR plug the camera directly into the NVR's built in PoE
switch.
The camera should automatically become visible after being connected for approximately 1
minute.
The 100m distance for a camera can be increased when the PoE Mode is set to EPoE.
In the menu on a ZIP PoE NVR go to:-
Video > IP Channels > PoE Mode

23/03/2022
IPCND705
6NiteDevil.com
5.2 Non-PoE ZIP NVR
When connecting cameras to a Non-PoE NVR, they are first connected to an externalnetwork
switch which is in-turn connected to the NVR as shown below.
See Extra Resources for more information on Adding IP Cameras manually to a ZIP
Recorder.
25

How to Login via Browser
© 2022 System Q Ltd
7
NiteDevil.com
How to Login via Browser
The AI smart features can be configured in a ZIP recorder or directly in the browser interface of
the camera (standalone)
Only one smart detection feature can be enabled at any given time.
See the NVR or DVR manual for information on configuring these features with a ZIP
recorder.
Follow the steps below for configuring the settings directly in the camera via a browser for
standalone setup.
You willneed...
· Windows Based PC/ Laptop connected to router/ PoE switch
· ZipVision Pro App on Mobile Device
· PoE Switch connected to Network/ Router
· Ethernet network cable
· ZipFinder software, available via this link below:-
www.softcctv.com/store/Item/Zip-Finder-IP-CCTV-Security-Camera-Discovery-Tool
NOTE Ifthe PC being used is on a different IP range to the PC then add the IP range of the
camera to the PC using the below guide:-
https://softcctv.com/helpdesk/kb/faq.php?id=571
1. Plug the camera's RJ45 port with a network cable into a PoE switch

23/03/2022
IPCND705
8NiteDevil.com
2. Using ZipFinder on a Windows Based PC/ Laptop Search and then tick the camera
3. Select Net Mode = DCHP, then click Modify
4. Search again, to get the updated IP address.
5. Select the IP address of the camera, Internet Explorer will pop-up, and ask to download and
install the plug-in.
6. Download, install and follow the steps for the plug-in installation, then re-load the browser
by selecting the IP address again.
5. Login to the IP Camera, the default login details are:-
User Name
admin
Password
777777

Browser Menu Settings
© 2022 System Q Ltd
9
NiteDevil.com
Browser Menu Settings
7.1 IPCND705
The menu be configured directly in the browser interface ofthe camera (standalone), in Remote
Setting you will find the menu settings below:-
Video
Live
Name
Camera (user editable)
Image Control
Date Format
DD/MM/YYYY /
MM/DD/YYYY /
YYYY/MM/DD
Time Format
24 Hour / 12 Hour
Flicker Control
50Hz / 60Hz
Show Name
Enable / Disable
Show Time
Enable / Disable
Save / Refresh
Image Control
Image Setting
FullColour Mode / Day / Night
Mode / Schedule
White Light
Manual/ Automatic mode /
Schedule / OFF
Angle Trad
180 / 0
Mirror
Disable / Vertical/ Horizontal/ All
Backlight
WDR / HLC / Back Light / Disable
White Balance
Automatic mode / Manual
Shutter
Automatic mode / Manual
Time Exposure
1/5 to 1/200000 / Flickerless
Defog
OFF / Automatic mode / Manual
3D Noise Reduction
OFF / Automatic Mode / Manual
Save / Default / Refresh
Privacy Mask
Enable / Disable
Record
Encode
Mainstream
Resolution
2880 x 1620 / 2560 x1440 / 2304 x
1296 / 1920 x 1080 / 1280 x 720
FPS
1 -25
Video Code Type
H.265 / H.264 / H.264+ / H.265+
Video Code Level
Main Profile
Bitrate Control
CBR / VBR
Bitrate Mode
Predefined / User-Defined
Bitrate
256 to 8192
I Frame Interval
1 to 100
Audio
Enable / Disable
Save / Refresh
Substream
Resolution
1280 x 720 / 640 x 480 / 320 x 240
FPS
1 -25

23/03/2022
IPCND705
10 NiteDevil.com
Video Code Type
H.265 / H.264 / H.264+ / H.265+ /
MJPEG
Video Code Level
Main Profile / Baseline / High Profile
Bitrate Control
CBR / VBR
Bitrate Mode
Predefined / User-Defined
Bitrate
128 to 4096
I Frame Interval
1 to 40
Audio
Enable / Disable
Save / Refresh
Mobilestream
Enable
Enable / Disable
Resolution
640 x 480 / 320 x 240
FPS
1 – 25
Video Code Type
H.265 / H.264 / H.264+ / H.265+
Video Code Level
Main Profile
Bitrate Control
CBR / VBR
Bitrate Mode
Predefined / User-Defined
Bitrate
8 to 1536
I Frame Interval
1 to 100
Audio
Enable / Disable
Save / Refresh
Record
Record
StreamMode
Mainstream/ Substream
Record
Enable / Disable
PreRecord
Enable / Disable
Netbreak
Enable / Disable
Save / Refresh
Schedule
User Definable
Save / Refresh
Event
Setup
Motion
Enable
Enable / Disable
Sensitivity
1 to 8
Save / Refresh
Deterrence
Save / Default / Refresh
Alarm
Post
Recording
OFF / 5s / 10s / 20s / 30s
Send Email
Enable / Disable
FTP Picture
Upload
Enable / Disable
Enable Record
Enable / Disable
Deterrent
Enable / Disable
Save / Schedule / Refresh
AI
Setup
PD & VD
Enable
Enable / Disable
Sensitivity
0 to 100
Dynamic Marking
Enable / Disable
Snap Mode
Default / Realtime Mode / Interval
Mode
Min Pixel
64 – 1080
Max Pixel
320 – 1080

Browser Menu Settings
© 2022 System Q Ltd
11
NiteDevil.com
Detection Type
Pedestrian & Vehicle / OFF /
Person / Vehicle
Detection Mode
Motion Mode / Static Mode
Detection Range
FullScreen / Customize
Save / Refresh
PID
Enable
Enable / Disable
Sensitivity
1 to 4
Dynamic Marking
Enable / Disable
Detection Type
Pedestrian & Vehicle / Person /
Vehicle
Rule Number
1 to 4
Rule Enable
Enable / Disable
Rule Type
/ / B
Save / Refresh
LCD
Enable
Enable / Disable
Sensitivity
1 to 4
Dynamic Marking
Enable / Disable
Detection Type
Pedestrian & Vehicle / Person /
Vehicle
Rule Number
1 to 4
Rule Enable
Enable / Disable
Rule Type
/ / B
Save / Refresh
SOD
Enable
Enable / Disable
Sensitivity
1 to 4
Dynamic Marking
Enable / Disable
Rule Number
1 to 4
Rule Enable
Enable / Disable
Rule Type
Legacy / Lost / Lost & Legacy
Save / Refresh
CC
Enable
Enable / Disable
Sensitivity
1 to 4
Dynamic Marking
Enable / Disable
Type
Person / Motion / Vehicle
AlarmNumber
1 to 255
Start Time
User definable
End Time
User definable
Rule Number
1
Rule Enable
Enable / Disable
Rule Type
/ B A
Save / Refresh / Reset Count
HM
Enable
Enable / Disable
Rule Number
1
Rule Enable
Enable / Disable
CD
Enable
Enable / Disable

23/03/2022
IPCND705
12 NiteDevil.com
Sensitivity
1 to 4
Dynamic Marking
Enable / Disable
Min Pixel
32 – 1080
Max Pixel
640 – 1080
Max Detection
Number
1 - 500
Detection Range
FullScreen / Customize
Rule Number
1
Save / Refresh
QD
Enable
Enable / Disable
Sensitivity
1 to 4
Dynamic Marking
Enable / Disable
Min Pixel
32 – 1080
Max Pixel
320 – 1080
Max Detection
Number
1 – 100
Max Pro Time
60
Detection Range
FullScreen / Customize
Rule Enable
Enable / Disable
Save / Refresh
Alarm
PD&VD / PID
/ LCD / SOD /
CC / CD / QD
Post Recording
OFF / 5s / 10s / 20s / 30s
Send Email
Enable / Disable
FTP Picture Upload
Enable / Disable
Enable Record
Enable / Disable
Deterrent
Enable / Disable
Save / Schedule / Refresh
Statistics
Human &
Vehicle
Detection
Cross
Counting
Statistics
Date
Intelligent
Search
Export
Report Type
Daily report / Weekly Report /
Monthly report / Annual report
Detection Type
Motion / Person / Vehicle
Cross Type
Cross in / Cross out
SystemTime
User-definable
Column Chart / Line Chart
Heat Map
Statistics
Report Type
Daily report / Weekly Report /
Monthly report / Annual report
Date
User-definable
Start Hour
End Hour
Space Heat Map / Time Heat Map
Spatial density legend
L – H
Network
General
General
DCHP
Enable / Disable
IP Address
User-definable

Browser Menu Settings
© 2022 System Q Ltd
13
NiteDevil.com
Subnet Mask
User-definable
Gateway
User-definable
DNS 1
User-definable
DNS 2
User-definable
Multicast –
Mainstream
Enable / Disable
Save / Refresh
PPPoE
Enable PPPoE
Enable / Disable
Username
User-definable
Password
IP Address
Save / Refresh
Port
Configuration
HTTP Port
Enable / Disable
User-definable
Client Port
HTTPS Port
RTSP Port
Muticast Port
1024 – 65535
P2P Enable
Enable / Disable
Save / Refresh
Email
Email
Enable / Disable
Encryption
OFF / SSL / TLS / Automatic mode
SMTP Port
1 - 65535
SMTP Server
User-definable
Username
Password
Sender
Receiver 1
Receiver 2
Receiver 3
Interval
Save / Test / Refresh
FTP
FTP Enable
Enable / Disable
Server
User-definable
Port
1 – 65535
Username
User-definable
Password
User-definable
Transfer Images
Enable / Disable
Save / Refresh
RTSP
RTSP Enable
Anonymous Login
Enable / Disable
Instruction:
rtsp://IP:RtspPort/ch01/A
A:0(main stream), 1(sub stream), 2(mobile stream)
Save / Refresh
DDNS
DDNS
Enable / Disable
Server
NO_IP / DYNDNS

23/03/2022
IPCND705
14 NiteDevil.com
Hostname
User-definable
Username
User-definable
Password
User-definable
IP Filter
Enable
Enable / Disable
Type
Enable Allow List / Enable Block List
Restricted Type
Allow list/ Block List
Save / Delete / Refresh
Storage
Disk
Select Disk
Overwrite
OFF / Auto
Save / Format Hard Disk / Refresh
Audio
Enable Audio
Enable / Disable
Output
Volume
0 – 8
Input Volume
0 – 8
Audio Code
Type
G711A / G711U
Save / Refresh
System
General
Date and Time
Time Setting mode
Static / NTP server synchronization
Date Format
Day/Month/Year
Year-Month-Day
Month/Day/Year
Time Zone
GMT -12:00 to GMT + 13:00
Time Format
24Hour / 12 Hour
SystemTime
User-definable
Server Address
Time.windows.com/ time.nist.gov /
pool.ntp.org / Define User
Save / Synchronize computer time / Refresh
Daylight
Saving Time
Daylight saving time
Enable / Disable
Set by week /
set by date
Start Time
User-definable
End Time
User-definable
Time Offset
1Hour / 2 hours
Save / Refresh
Multi-User
Customize
Each user
Password (Edit)
Username
User-definable
Password
User-definable
Password Strength
User-definable
Confirm
Refresh
Maintain
Log
Log Type
System/ CON. /
Alarm/ Account /
Record / Storage /
Network / All
Search
Start Time
User-definable
End Time
User-definable
Load Default
All / Video / Record/ Event / AI / Network/ Storage /
System

Browser Menu Settings
© 2022 System Q Ltd
15
NiteDevil.com
Save / Refresh
Upgrade
Path
Search LocalFiles
Upgrade
Save / Load
Import File
Search LocalFiles
Import
Export File Name
Search LocalFiles
Export
Auto Reboot
Auto-maintenance
Enable / Disable
Time
Date / Week / Month
Mon / Tues / Wed / Thur / Fri/ Sat /
Sun
Time
Save / Refresh / Reboot
Information
Device ID
Device Name
Device Type
Hardware Version
Software Version
Web Version
Mac Address
P2P ID
Refresh

23/03/2022
IPCND705
16 NiteDevil.com
Customising the Day / Night Setting to IR
Once logged into the camera browser interface:-
Go To Remote Settings > Video > Image Control > Image Settings
e.g. Day / Night mode if want the camera to B&W & use the IR
Suggested setting :IR Cut to Auto.

Turn off Deterrence LED
© 2022 System Q Ltd
17
NiteDevil.com
Turn off Deterrence LED
Once logged into the camera browser interface:-
To turn deterrence LED offalso
Go to Remote Settings > Event > Setup > Deterrence > Light > Select Off > Select
SAVE

23/03/2022
IPCND705
18 NiteDevil.com
AI Features
The AI smart features can be configured in a ZIP recorder or directly in the browser interface of
the camera (standalone)
Only one smart detection feature can be enabled at any given time.
See the NVR or DVR manual for information on configuring these features with a ZIP
recorder.
Note :- Additional features (SOD, CC, HM, CD and QD) willbe added at a later date.
10.1 PD & VD = Pedestrian Detection and Vehicle Detection
Pedestrian detection and vehicle detection can be set to trigger an alarmevent in a customarea
when it detects pedestrians, vehicles or both.