Page
TheTunerconsistsoftwoscreens.Thefirstistheplayscreen
whichwilldisplaythedetailsoftheselectedradiostation.This
willnormallyconsistoftheactualstationnamefollowedbyits
genreandoftensomeaccompanyingtext.Thetextcanconsist
ofupto120characters.Toviewthisinitsentirety,clickonthe
texttoexpandthefieldtoshowallofthetextinformation.Click
againonthetexttoreverttonormaldisplay.Asignalstrength
barcompletesthemaindisplay.Onthelefthandsidethereare
buttonstoswitchbetweenDAB&FM.Thereisalsoabuttonto
enterthePre-setsscreenandtwofurtherbuttonstotuneupor
down.
Note: In DAB mode, this will always scan to the next station, but in FM
mode, the Arcam tuner does not support this feature, so it just
adjusts the frequency.
The tuner pre-sets screen
ClickonthePre-setsbuttonontheplayscreenandthepre-sets
screenwillappear.Upto12pre-setstationscanbestoredand
fourofthesearevisibleatatime.Scrollbuttonsatthebottomof
thescreenenableyoutoscrollupordowntothenextsetofpre-
sets.Thepre-setbuttonsarelabelledautomaticallyfromtheradio
stationtextfield,sothereisnoneedtomanuallylabelthebuttons.
Note For each pre-set, the Arcam tuner takes about 30 seconds to load
the station text in to the pre-set text field of each of the Touch
Screens. Once loaded, this information will be retained until the
system is disconnected from the power supply.
