TablerTV Frame User manual

TablerTV Frame Assembly Guide
2. TablerTV Frame Packing List
1. Product Introduction
TablerTV is an all-in-one hardware which could quickly turn your TV/Display into a multi-touch device. For
each TablerTV, you can choose among 3 versions. Namely, 2 touch points(entry- level), 6 touch points
(standard) and 32 touch points(professional level). TablerTV is super easy to setup, you can assemble it
quickly according to the TablerTV Assembly Steps.
L Please check your TablerTV package to find out all the items in the packing list. TablerTV reserves all
the right to alter or modify the shape, color or any other appearance of the items in the package at any
time without notice.
Email: [e-mail] 1
14 2 3
1 Driver Disk
2 USB Cable
3 Power Adaptor
4 TablerTV Frame with Embedded Tempered Glass
Note: Due to the different appearance of TV/Display models, the shape of the above items may
vary.
“”

Note: For TablerTV Assembly with TablerTV stand, please refer to TablerTV Stand Assembly Guide.
3. TablerTV Assembly Steps (without TablerTV stand)
Set your TV/Display face up, and snap TablerTV frame onto it like a cell phone cover. You just need to
put two top corners of TV/Display into the frame, and then lie down the frame naturally to make it cover
the two bottom corners of TV/Display.
3-1. Mount TableTV Frame to Your TV/Display
Bottom
Top
TablerTV
TV/Display
TablerTV
TV/Display
1 - !
1 - @
iStick: Mini-sized computer with high performance and 3D acceleration, best companion with TablerTV
for digital signage.
TablerTV Stand: Provide stable and firm support, avoid shaking when fingers touching on the screen.
TablerTV STANDiStick
Stand for TablerTV below 70” Stand for 70” and above TablerTV
Note: We also recommend the following accessories with TablerTV Frame
Email: [e-mail] 2
“”

3-2. Fix TablerTV with TV/display on the wall or use our specially designed TablerTV stand
(Recommended).
3-3. Plug the USB cable and power cable into the sockets on the lower left corner of the
TablerTV frame.
3-4. Install the multi-touch driver on the driver disk.
1 - #
• Click “next” on the installation interface. • It’s very important to check both the Driver
and Platform are installed.
Installing TablerTV Multi-Touch Driver:
Driver: Installing the driver will allow the computer and display to recognize the TablerTV.
Follow the simple instructions below to complete your installation.
Email: [e-mail] 3
Note: There is no need for driver installation on iStick
“”
Multi-Touch Driver Download Link:
http://tabler.tv/driver-download.html

5. Software/Hardware Requirements
Dual Core 2.5G or better
2G or more
Windows 8/7/Vista/XP, Mac OS X, Ubuntu/Fedora
N/A
AC Adapter (5V, 4A)
Minimum
Processor
Memory
Graphic Card
Operating System
Power Supply
Processor
Memory
Graphic Card
Operating System
Power Supply
Quad Core 2.5G or better
4G or more
DX 9.0 standalone VRAM: 512MB or better
AC Adapter (5V, 4A)
Recommended
Windows 8/7
6. Environmental Requirement
Operating temperature: 32°F to 131°F
Storage temperature: -13°F to 185°F
Operating humidity: 10% to 90% RH, non-condensing
Storage humidity: 10% to 90% RH, non-condensing
4. Product Warranty
TablerTV warrants its hardware against defects in materials and workmanship for a period of one (1) year
from the date it is shipped to the customer. In the event a reseller purchases a product from TablerTV and
integrates it with a system, the warranty period begins on the original ship date from TablerTV. Warranty is
void when failure of the product results from an accident, abuse, misapplication, modification, unautho-
rized maintenance or repair by the customer. Hazards such as lightning and flooding, as well as neglect of
voltage specifications are not covered under warranty.
• Select “reboot now”, and click “finish” to
complete the installation.
• In a few minutes, installation of the Driver
and Platform should be complete. You’ll need
to reboot your computer after installation.
• Designate the installation path.
Email: [e-mail] 4
“”
©2014 TablerTV. All Rights Reserved.