
1.This scale operates on 3 “AAA” batteries, which are included. Please
see“BatteryInstallation”sectionofthismanualforinstallation
instructions. Also, some models have a static cling label on the lens to
preventscratching.Pleaseremovebeforeuse.
2.Your scale has been set at the factory to read weight in pounds (lb).
Youmayselectkilograms(kg)orstone(stlb)(1stone=14pounds)units
ofmeasurementbypressingthebuttononthebottomofthescale
whilethescaleison.(Pressfirmlyontheplatformtoturnthescaleon.)
3.Place scale on flat, hard surface. Carpeted or uneven floors may affect
accuracy.
4.Step on the scale (disregarding the reading) and step off. This process
insuresthescaleissetandisnowreadyforuse.Atallothertimesstep
straightontothescale.
5.Step onto the scale platform and remain still. The display will count up to
yourweight.Thedisplaywillflashtwicewhentheweightislocked.Your
weightisnowdisplayed.
6.The scale will turn off automatically.
Precautions
1.Clean exposed parts with a soft, slightly damp cloth. To remove stains, use a mild soap.
Neverusedetergents,excesswater,treatedcloths,harshcleaningagents,orsprays.
Donotattempttolubricateoropenscalecasingasthiswillvoidyourwarranty.
2.Although your scale is designed to be maintenance-free, it contains sensitive electronic
parts.Avoid rough treatment. Do not drop, kick, or jump on it. Treatitwith care to
ensurethe best performance.
3.This scale is designed to read weights between 11 and 550 lbs / 5 and 250 kgs /11lbs and
39 st 4 lbs. To prevent damage, do not place more than 550 lbs /250 kgs / 39 st 4 lbs on
it.
4.Do not store scale where you store cleaning chemicals. The vapors from some
household products may affect the electronic components of your scale. Do not store
scaleon its side.
5.This scale is an extremely sensitive weighing device. In order to prevent run down of the
batteries,do not store anything on the scale.
6.Do not dispose of batteries in fire. Batteries may explode or leak. Remove the batteries if
thescale will not be used for a long period of time.
Caution: Changes or modifications not expressly approved by the party responsible for compliance
couldvoidthe user's authority to operate the equipment.
Note: This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation. This equipment
has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15
of the FCC rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause harmful interference to radio
or television reception, which can be determined by turning the equipment off and on, the user is
encouragedtotry to correct the interference by one or moreof the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
- Consult the dealer or an experienced radio/TV technician for help.
INSTRUCTION MANUAL
MODEL 7410
Electronic Scale
Thank you for purchasing a Taylor® scale. We strive to provide you with
a high quality bath scale that meets your needs. Your opinion and
experience with our product is important to us. If you are pleased with
your Taylor product, please take a moment to share your thoughts with
others by writing an on-line review.
Please read this instruction manual carefully before use. Keep these
instructions handy for future reference.
General Operation