tecan sunrise RC User manual

TECAN
Technical Manual for
sunrise
RC, TW, TS, TC, BC, 6F
Document Part No. T 137 302
2004-10
Document Revision: 1.1
Firmware Revision Level: 3.xx

2 Technical Manual for sunrise RC, TW, TS, TC, BC, 6F No. T 137 302 Rev No. 1.1 2004-10
TECAN Affiliates and Service Centers
Austria
Tecan Austria GmbH
Untersbergstrasse 1a
A-5082 Grödig / Salzburg
Austria
Tel.: [phone]
Fax: [phone]
Austria
Tecan Sales International
GmbH
Untersbergstrasse 1a
A-5082 Grödig / Salzburg
Austria
Tel.: [phone]
Fax: [phone]
Asia
Tecan Asia (Pte) Ltd.
80, Marine Parade #13-04
Singapore 449269
Singapore
Tel.: [phone]
Fax: [phone]
Belgium
Tecan Benelux B.V.B.A.
Vaartdijk 55
B-2800 Mechelen
Belgium
Tel.: [phone]
Fax. [phone]
France
Tecan France26 Avenue Tony
Garnier
69007 LYON
France
Tel.: [phone]
Fax: + 33 47 27 60 499
Germany
Tecan Deutschland GmbH
Theodor-Strom-Straße 17
D-74564 Crailsheim
Germany
Tel.: [phone]
Fax: [phone]
Italy
Tecan Italia S.r.l.
Via F.lli Cervi
Palazzo Bernini
Centro Direzionale Milano2
20090 Segrate (Mi)
Italy
Tel.: [phone]
Fax: [phone]
Japan
Tecan Japan Co. Ltd
Meiji Seimei Fuchu Building 10F
1-40 Miyamachi
Fuchu City, Tokyo
Japan
Tel.: [phone]
Fax: [phone]
Netherlands
Tecan Benelux B.V.B.A.
Industrieweg 30
NL-4283 Giessen
Netherlands
Tel.: [phone]
Fax: [phone]
Spain
Tecan Spain
Sabino de Arana, 32
E-08028 Barcelona
Spain
Tel.: [phone]
Fax: [phone]
Sweden
Tecan Nordic AB
Box 208, SE-431 23
Mölndal
Sweden
Tel: [phone]
Fax: [phone]
Switzerland
Tecan Sales Switzerland AG
Seestrasse 103
CH-8708 Männedorf
Switzerland
Tel: [phone]
Fax: [phone]
United Kingdom
Tecan UK
Theale Court
11-13 High Street
Theale
UK-Reading RG7 5AH
United Kingdom
Tel.: [phone]
Fax: [phone]
USA
Tecan US
P.O. Box 13953
Research Triangle Park,
NC 27709
USA
Tel.: [phone]
Fax: [phone]

2004-10 Technical Manual for sunrise RC, TW, TS, TC, BC, 6F No. T 137 302 Rev No. 1.1 3
WARNING
CAREFULLY READ AND FOLLOW THE INSTRUCTIONS PROVIDED IN
THIS DOCUMENT BEFORE USING THE SOFTWARE OR
OPERATING THE INSTRUMENT.
Notice
Every effort has been made to avoid errors in text and diagrams; however,
Tecan Austria GmbH assumes no responsibility for any errors that may appear
in this publication.
It is the policy of Tecan Austria GmbH to improve products as new techniques
and components become available. Tecan Austria GmbH therefore reserves
the right to change specifications at any time.
We would appreciate any comments on this publication.
Manufacturer
Tecan Austria GmbH
Untersbergstraße 1A
A-5082 Grödig/Salzburg
AUSTRIA / EUROPE
Telephone: [phone]
FAX: [phone]
Email: [email protected]
Copyright Information
The contents of this document are the property of Tecan Austria GmbH and are
not to be copied, reproduced, or transferred to another person or persons
without prior written permission.
Copyright ©Tecan Austria GmbH
All rights reserved.
Printed in Austria
Declaration for EU Certificate
See the back of this document.
About the Instructions for Use
This technical manual describes the servicing of the sunrise Absorbance
Reader, which is designed to measure the light absorbance (optical density) of
samples in 96 well microplates. It is intended as reference for service personnel.
This manual describes:
• The installation of the instrument
• Operation of the instrument
• Service software
• Repair and adjustment of the instrument
• Cleaning and maintenance of the instrument

4 Technical Manual for sunrise RC, TW, TS, TC, BC, 6F No. T 137 302 Rev No. 1.1 2004-10
Warnings, Cautions and Notes
There are various types of notices used in this publication. These notices
highlight important information or warn the user of a potentially dangerous
situation. The notices used in this publication appear below:
Note
Gives helpful information.
Caution
Indicates a possibility of instrument damage or data loss if instructions
are not followed.
WARNING
INDICATES THE POSSIBILITY OF SEVERE PERSONAL INJURY, LOSS
OF LIFE OR EQUIPMENT DAMAGE IF THE INSTRUCTIONS ARE NOT
FOLLOWED.
WARNING
INDICATES THE POSSIBLE PRESENCE OF BIOLOGICALLY
HAZARDOUS MATERIAL. PROPER LABORATORY SAFETY
PRECAUTIONS MUST BE OBSERVED.
WARNING
INDICATES LASER. DO NOT STARE INTO THE BEAM!

2004-10 Technical Manual for sunrise RC, TW, TS, TC, BC, 6F No. T 137 302 Rev No. 1.1 5
Symbols
Manufactured by
Date of manufacture
Conformité Européenne
In vitro diagnostic medical device
Laser
Biohazardous
IVD

6 Technical Manual for sunrise RC, TW, TS, TC, BC, 6F No. T 137 302 Rev No. 1.1 2004-10
Abbreviations
Abbreviation
A Ampere
Abs. Absorbance
ADC Analog digital converter
C Celsius
CE Conformité Européenne
cm Centimeter
F Fahrenheit
Hz Hertz
IVD In vitro diagnostics
IVD-D In vitro diagnostics Directive
kg Kilogram
l; L Liter
LED Light emitting diode
MB Megabyte
µl Microliter
ml Milliliter
nm Nanometer
REF Reference Number/ Order Number
SN Serial Number
TYPE Name and type of instrument
USB Universal serial bus
V Volts
VA Volt ampere
VGA Video graphics array
VOLTAGE Voltage

2004-10 Technical Manual for sunrise RC, TW, TS, TC, BC, 6F No. T 137 302 Rev No. 1.1 7
Table of Contents
1. Safety
1.1 Instrument Safety................................................................. 1-1
2. General
2.1 Introduction.......................................................................... 2-1
2.2 Area of Application.............................................................. 2-3
2.2.1 Intended Use.......................................................................... 2-3
2.2.2 Variations of sunrise........................................................... 2-4
2.2.3 Available Options for sunrise............................................. 2-5
2.3 Specifications....................................................................... 2-6
2.3.1 General.................................................................................. 2-6
2.3.2 Standard Instrument (Standard Filter Carriage)..................... 2-7
2.3.3 Touchscreen Color Instrument............................................... 2-8
2.3.4 Tuneable Wavelength Instrument (Gradient Filter Carriage) . 2-9
2.3.5 6 Filter Instrument (6 Filter Carriage)..................................... 2-9
2.3.6 Temperature Control............................................................ 2-10
2.3.7 Barcode Laser Scanner....................................................... 2-10
2.3.8 Microplates........................................................................... 2-11
2.3.9 USB Stick............................................................................. 2-12
2.4 Instrument Description...................................................... 2-12
2.4.1 Back Panel Connections...................................................... 2-13
2.4.2 Handling the Microplate....................................................... 2-14
2.5 Filter Carriage Description................................................ 2-15
2.5.1 Standard Filter Carriage....................................................... 2-15
2.5.2 Gradient Filter Carriage ....................................................... 2-16
2.5.3 6 Filter Carriage................................................................... 2-17
2.6 Instrument Features .......................................................... 2-17
2.6.1 Measurement Modes........................................................... 2-17
2.6.2 Microplate Shaking .............................................................. 2-18
2.7 Instrument Accessories .................................................... 2-19
2.8 Software for the sunrise Absorbance Reader................. 2-19
3. Installation Procedure
3.1 Introduction.......................................................................... 3-1
3.2 Unpacking and Inspection .................................................. 3-1
3.3 Unpacking Procedure.......................................................... 3-2
3.4 Power Requirements ........................................................... 3-2
3.5 Environmental Requirements............................................. 3-3

8 Technical Manual for sunrise RC, TW, TS, TC, BC, 6F No. T 137 302 Rev No. 1.1 2004-10
4. Firmware and Software Description
4.1 Rdr Download Software ...................................................... 4-1
4.1.1 Starting the Firmware Download............................................ 4-2
4.1.2 Open file ................................................................................ 4-3
4.2 Rdr OLE Server.................................................................... 4-4
4.2.1 Installation of Instrument Control Software ............................ 4-4
4.3 sunrise Instrument Settings................................................ 4-4
4.3.1 Installation of sunrise Instrument Settings Software .............. 4-4
4.3.2 Starting the sunrise Instrument Settings................................ 4-5
4.3.3 Define Instrument Mode......................................................... 4-5
4.3.4 Define Filter............................................................................ 4-6
4.3.5 Define Measurement Mode.................................................... 4-7
4.4 SunSet Software (Service tool kit is necessary!).............. 4-8
4.4.1 Installation of SUNSET Software........................................... 4-8
4.4.2 Starting the SunSet Software................................................. 4-8
4.4.3 Setup All ................................................................................ 4-9
4.4.4 Device configuration ............................................................ 4-10
4.4.5 Mirror and lamp adjustment ................................................. 4-10
4.4.6 Plate calibration ................................................................... 4-11
4.4.7 Measurement offset (Inhouse plate is necessary)................ 4-12
4.4.8 User Configuration............................................................... 4-13
4.4.9 SunSet Options Menu.......................................................... 4-14
5. Removing and Replacing the Instrument Cover
5.1 Removal of Instrument Top Cover ..................................... 5-1
5.2 Removal of the Front Cover................................................ 5-3
5.3 Removal of Touchscreen .................................................... 5-4
6. Optical System
6.1 Introduction.......................................................................... 6-1
6.2 Optical System Description ................................................ 6-1
6.3 Optical System Diagram...................................................... 6-2
6.3.1 Measurements with Wavelengths below 400 nm................... 6-3
6.3.2 Agglutination Measurement Mask for SUNRISE ST Option... 6-3
6.4 Lamp Replacement.............................................................. 6-4
6.5 Filter Slide Replacement ..................................................... 6-4
6.6 Lamp and Mirror Unit Parts................................................. 6-4
6.6.1 Heat Filter and Air Filter......................................................... 6-4
6.6.2 Mirror, Optical Lens................................................................ 6-5
6.7 Filter Guide (Standard Instrument ).................................... 6-6
6.8 Filter Guide ( Tuneable Wavelength/ 6 Filter):................... 6-8
6.9 Replacing Fiber Bundle....................................................... 6-9

2004-10 Technical Manual for sunrise RC, TW, TS, TC, BC, 6F No. T 137 302 Rev No. 1.1 9
6.9.1 Difference between Standard Fiber Optic and Tuneable
Wavelength Fiber Optic ....................................................... 6-10
6.10 Other Parts of the Optical System.................................... 6-10
6.11 Blocking Filter Wheel for Tuneable Wavelength............. 6-11
6.12 Filter Wheel Properties...................................................... 6-12
7. Mechanical System
7.1 Introduction.......................................................................... 7-1
7.2 Transport System Description............................................ 7-1
7.3 Measurement Procedure..................................................... 7-1
7.4 The Transport Box Assembly............................................. 7-2
7.5 Replacing the Transport Box.............................................. 7-3
7.6 Transport Box Adjustments................................................ 7-5
7.7 Replacing the Temperature Control Unit........................... 7-5
8. Electronic System
8.1 Introduction.......................................................................... 8-1
8.2 Interconnection Diagram (Standard RC)............................ 8-2
8.3 Voltage Diagram (Standard RC).......................................... 8-3
8.4 Main Board ........................................................................... 8-4
8.5 Replacing the Main Board................................................... 8-5
8.6 Power Board (Standard)...................................................... 8-7
8.7 Replacing the Power Board (Standard).............................. 8-8
8.8 Power Board (Tuneable Wavelength / 6 Filter).................. 8-9
8.9 TW Board............................................................................ 8-11
8.10 Thermo Board .................................................................... 8-12
8.11 12 Volt Board...................................................................... 8-13
8.12 Power Supply board .......................................................... 8-14
8.13 Replacing the Power Supply............................................. 8-14
8.14 Barcode Board................................................................... 8-15
8.15 Optical Switches................................................................ 8-16
8.16 WinCE Board...................................................................... 8-18
8.17 Converter Board................................................................. 8-19
8.18 Touch Panel........................................................................ 8-20
9. Interfaces
9.1 Computer Interface.............................................................. 9-1
9.1.1 Hardware Specifications ........................................................ 9-1
9.1.2 Pin Designation...................................................................... 9-1
9.1.3 RS-232-C Interface Lines ...................................................... 9-2
9.2 Handshakes:......................................................................... 9-4
9.3 Commands Response Time:............................................... 9-4
9.4 Command Syntax for the Serial Interface:......................... 9-4

10 Technical Manual for sunrise RC, TW, TS, TC, BC, 6F No. T 137 302 Rev No. 1.1 2004-10
9.5 Synchronization and Data Format...................................... 9-5
9.6 Signal Levels........................................................................ 9-5
9.7 Software Specifications ...................................................... 9-6
9.8 Handshake............................................................................ 9-6
9.9 Timing Of Messages............................................................ 9-6
9.10 Communication Messages.................................................. 9-6
9.11 Printer Interface ................................................................... 9-7
9.11.1 Character Set Setting............................................................. 9-7
9.11.2 Hardware Specifications ........................................................ 9-7
9.11.3 Connector .............................................................................. 9-7
9.12 Parallel Interface Lines........................................................ 9-8
9.13 Table of Connections .......................................................... 9-8
9.14 Key to Table.......................................................................... 9-9
10. Sunrise Service Tool Kits for Sunrise RC and Options
10.1 Service tool kit 1 (S 039 341)............................................. 10-1
10.1.1 Introduction.......................................................................... 10-1
10.2 Installation Procedure ....................................................... 10-2
10.3 Sunrise SUNSET Software................................................ 10-2
10.4 QC Pac 2 Service Software:.............................................. 10-3
10.5 Flashcard Download for Touchscreen Unit..................... 10-4
10.6 Barcode Upgrade Kit ......................................................... 10-5
10.6.1 General................................................................................ 10-5
10.6.2 Installation............................................................................ 10-6
10.6.3 Software Installation and Adjustment................................... 10-9
10.7 Overview of Single commands:...................................... 10-16
11. Maintenance & Cleaning
11.1 Introduction........................................................................ 11-1
11.2 Lamp Replacement............................................................ 11-1
11.3 Filter Replacement............................................................. 11-3
11.3.1 Standard Filter Carriages..................................................... 11-3
11.3.2 Gradient Filter Carriages...................................................... 11-4
11.3.3 6 Filter Carriages ................................................................. 11-5
11.4 Fuse Replacement ............................................................. 11-6
11.5 Cleaning the Instrument.................................................... 11-7
11.6 Preventive Maintenance Plan for sunrise........................ 11-8
11.6.1 Daily..................................................................................... 11-8
11.6.2 Weekly................................................................................. 11-8
11.6.3 Every Six Months................................................................. 11-8
11.6.4 Yearly (Customer or Service Technician) ............................ 11-8
11.6.5 Every Four Years (Service Technician Required)................ 11-8

2004-10 Technical Manual for sunrise RC, TW, TS, TC, BC, 6F No. T 137 302 Rev No. 1.1 11
11.7 Instrument Disinfection..................................................... 11-9
11.7.1 Disinfection Procedure......................................................... 11-9
11.8 Disinfection Declaration.................................................. 11-10
11.9 Disposal of Instrument.................................................... 11-11
11.9.1 Introduction........................................................................ 11-11
11.9.2 Disposal of Packing Material.............................................. 11-11
11.9.3 Disposal of Operating Material........................................... 11-11
11.9.4 Disposal of the Instrument ................................................. 11-12
12. Performance Testing / Quality Control
12.1 Introduction........................................................................ 12-1
12.2 Optimizing for Maximum Performance ............................ 12-1
12.2.1 Instrument Location ............................................................. 12-1
12.2.2 Operating Procedure............................................................ 12-2
12.2.3 Self Check Procedure.......................................................... 12-4
12.3 Performance Tests............................................................. 12-4
12.3.1 QC PAC 2............................................................................ 12-4
12.3.2 Microplate Test .................................................................... 12-4
12.3.3 High Meniscus Liquids......................................................... 12-6
12.4 Quality Control Testing ..................................................... 12-9
12.4.1 Instrument Precision............................................................ 12-9
12.4.2 Instrument Accuracy.......................................................... 12-10
12.4.3 Instrument Linearity ........................................................... 12-11
13. Trouble Shooting
13.1 Introduction........................................................................ 13-1
14. Index

TECAN 1. Safety
2004-10 Technical Manual for sunrise RC, TW, TS, TC, BC, 6F No. T 137 302 Rev No. 1.1 1-1
1. Safety
1.1 Instrument Safety
1. Always follow basic safety precautions when using this product to reduce
the risk of injury, fire or electrical shock.
2. Read and understand all information in this document. Failure to read,
understand and follow the instructions in this publication may result in
damage to the product, injury to operating personnel or poor instrument
performance.
3. Observe all WARNING and CAUTION statements in this publication.
4. Never open
sunrise while the instrument is plugged into a power source.
5. Observe proper laboratory safety precautions, such as wearing protective
clothing and using approved laboratory safety procedures.
WARNING
IF THE sunrise ABSORBANCE READER OR THE MAGELLAN
SOFTWARE ARE MODIFIED IN ANY WAY, THE PERFORMANCE OF THE
READER MAY BE NEGATIVELY AFFECTED,
THE WARRANTY WILL NO LONGER BE VALID AND THE INSTRUMENT
WILL NOT BE CE CONFORM.

2. General
2004-10 Technical Manual for sunrise RC, TW, TS, TC, BC, 6F No. T 137 302 Rev No. 1.1 2-1
2. General
2.1 Introduction
Note
The sunrise Absorbance Reader is intended for use with only external
software.
Caution
Before starting measurements, make sure that the microplate
position A1 is inserted correctly.
The sunrise instruments are fully automatic, microprocessor controlled readers
designed for professional use for in vitro diagnostic applications, enabling the
user to measure the light absorbance (optical density) of samples in 96 well
microplates according to the specifications described in this publication.
Note
Results obtained using the sunrise are influenced by the proper use of the
instrument and microplates, according to the instructions given in this
document, as well as the liquid compounds used (reagents, chemistry). The
instructions for use, for storage and for other manipulations in connection
with samples or reagents must be strictly followed. Taking this fact into
consideration, results must be interpreted carefully.
By reading twelve wells simultaneously, the instrument is able to measure a
microplate in approximately six seconds.
The obtained transmission values are converted into OD values according to the
following formula:
T
1
LogOD
II
TonTransmissi o
=
=
lightdetectedI
lightemittedIo
=
=
With an innovative range of options, this versatile microplate reader gives
diagnostic and research laboratories all the features for numerous purposes.
Based on a new design concept EPAC, the excellent optical performance and
high quality of the sunrise will guarantee fast, reproducible and accurate
measurements.
The sunrise is designed to be fitted into Tecan robotic systems.
The sunrise Absorbance Reader is an optical 96-well microplate reader for the
measurement of absorbance and turbidimetry of samples from the biological or
non-biological origin according to the specifications described in this document,
intended for professional use only.

2. General
2-2 Technical Manual for sunrise RC, TW, TS, TC, BC, 6F No. T 137 302 Rev No. 1.1 2004-10
The sunrise Absorbance Reader is available with options Touchscreen,
tuneable wavelength, temperature control and barcode scanner.
When used with the appropriate Magellan software, the Tecan sunrise
Absorbance Reader is declared suitable for in-vitro diagnosis (IVD) purposes
(Directive 98/79/EC of the European Community).
Magellan is a reader control and data reduction software package, also used for
concentration and titer determination.
Note
It is important to note that the proper installation of the instrument and
Magellan software alone will not ensure compliance with the IVD
directive. A range of policies and standard operating procedures
according to local regulations must also be established.
Make sure that the instrument and the software are suitable for use with the
reagents, chemicals and microplates used (see 12.2 Optimizing for Maximum
Performance and 12.3 Performance Tests).
Caution
If the instructions given in this publication are not correctly followed,
the instrument may become damaged or procedures may not be
correctly performed and the safety of the instrument cannot be
guaranteed.
Note
For more information about the operating instructions,
see Magellan or XFluor4 Instructions for Use.
WARNING
CAREFULLY READ AND UNDERSTAND ALL INFORMATION IN THIS DOCUMENT.
FAILURE TO READ, UNDERSTAND AND FOLLOW THE INSTRUCTIONS IN THIS
PUBLICATION MAY RESULT IN DAMAGE TO THE PRODUCT, INJURY TO
OPERATING PERSONNEL OR POOR INSTRUMENT PERFORMANCE.

2. General
2004-10 Technical Manual for sunrise RC, TW, TS, TC, BC, 6F No. T 137 302 Rev No. 1.1 2-3
2.2 Area of Application
2.2.1 Intended Use
The sunrise Absorbance Reader is an optical 96-well microplate reader for the
measurement of absorbance including turbidimetry (optical density) of samples
from biological or non-biological origin. According to the specifications described
in this manual, the instrument is intended for professional use in:
 In-vitro diagnostic environments with tests like:
• Enzyme Immuno Assays (EIA), e.g. for diagnostic of infectious
diseases, autoimmune diagnostic, allergy screening
• Agglutination Assays, e.g. for blood typing assays
• Enzyme Assays, e.g. haemostaseology assays and
• Enzyme Linked Probe Hybridization Assays (ELPHA), e.g. HLA-
typing assays
which have been validated according to the IVD directive or other
relevant regulations or
 Pharmaceutical, biotechnological and life science industry, for research
use, for food analysis and veterinary applications.
The sunrise Absorbance Reader has been validated for use with representative
applications from the above list. The validation shows the general ability of the
sunrise Absorbance Reader to use the above mentioned methods.
Note
If the sunrise Absorbance Reader or Magellan software
are modified in any way the instrument loses its guarantee
and will no longer be IVD compliant.
Note
The operating authority must use only CE-labeled test kits for clinical
diagnostic applications. The operating authority must assure that the
combination of a particular CE-labeled test kit used with the CE-labeled
sunrise Absorbance Reader has been validated according to the IVD
directive or to other relevant national or local regulations.
If the sunrise Absorbance Readeris used with any other software other than
Magellan, additional validation must be carried out by the operating authority to
ensure the safety of the results. The operating authority is fully responsible for
any results obtained using software other than Magellan with the sunrise
Absorbance Reader.

2. General
2-4 Technical Manual for sunrise RC, TW, TS, TC, BC, 6F No. T 137 302 Rev No. 1.1 2004-10
2.2.2 Variations of sunrise
All variations of the sunrise Absorbance Reader and its options are compliant
with the IVD directive and part of the CE declaration of conformity.
sunrise Hardware Variations
The following table shows the compatibility of the filter slides with each sunrise
hardware variation:
sunrise
Variations 4 Filterslide 6 Filterslide Gradient
filterslide
Standard X
6 Filter X X
Tuneable
Wavelength X X X
sunrise Options
The sunrise options work with all hardware variations and accessories and can
be used in any combination:
sunrise Options
Temperature Control
Touchscreen
Barcode
sunrise Accessories
The sunrise accessories work with all hardware variations and options and can
be used in any combination:
IVD Compliant
sunrise
Accessories Included in CE1Separate CE2Research Use
Only None/ Unrelated3
4 Filterslide X
6 Filterslide X
Gradient Filter X
sunrise
Instrument
Settings X
XFluor 4 X
Magellan X
Magellan TS X
QC Pac 1 X
QC Pac 2 X
1IVD compliant. Included in the CE declaration for the instrument.
2IVD compliant. CE declaration is separate from that of the instrument.
3Can be used in an IVD environment. CE declaration does not exist or it is unrelated to IVD compliance.

2. General
2004-10 Technical Manual for sunrise RC, TW, TS, TC, BC, 6F No. T 137 302 Rev No. 1.1 2-5
2.2.3 Available Options for sunrise
The sunrise is a modular system, so you can create your own tailor-made
instrument that meets exactly your needs. Options such as a Touchscreen
combined with a WindowsCE based on-board software, free wavelength
selection, temperature control and a barcode scanner can be added onto the
basic system which is dedicated to remote controlled computer operation.
Factory Installed Options
Touchscreen
sunrise Absorbance Reader
Tuneable wavelength
from 400 – 700 nm
Temperature control
Upgrade in field possible
Barcode scanner
Barcode upgrade kit
6 Filter

2. General
2-6 Technical Manual for sunrise RC, TW, TS, TC, BC, 6F No. T 137 302 Rev No. 1.1 2004-10
2.3 Specifications
The tables below list the specifications for the instruments.
2.3.1 General
For all instrument options:
PARAMETERS CHARACTERISTICS
Main power input 100 - 120 & 220 - 240 V ± 10% 50/60 Hz
(Auto sensing)
Consumption Stand by mode: approx. 50 VA
Operational mode: max. 110 VA
Fuse rating 2 x F 2.0 A / 250 V (Fast Blow)
Outside dimensions Width: 33,5 cm
Depth: 32,0 cm
Height: 17,0 cm
Weight 6 kg
Ambient temperature:
Operation 15°C to 35°C (59°F to 95°F)
Storage -40°C to 60°C (-40°F to 140°F)
Relative humidity:
Operation 20 % to 90 %
Storage 5 % to 95 %
Overvoltage category II
Pollution degree 2
Method of disposal Contaminated waste
Environment See 3.5 Environmental Requirements for more
information.
Stability:
Normal measurements After 15 minutes warm up time max. +/- 0.001 Abs