Technaxx FMT600BT User manual

Technaxx
®
* User Manual
FMT600BT Transmitter
Transfer of music and calls directly from your Bluetooth device
to your car radio
The manufacturer Technaxx Deutschland GmbH & Co.KG hereby declares that this device,
to which this user manual belongs, complies with the essential requirements of the
standards referred to the Directive RED 2014/53/EU. The Declaration of Conformity you
find here: www.technaxx.de/ (in bar at the bottom “Konformitätserklärung”). Before using
the device the first time, read the user manual carefully.
Turn OFF nearby Bluetooth devices to avoid signal interference!
Service phone No. for technical support: 01805 012643 (14 cent/minute from German
fixed-line and 42 cent/minute from mobile networks).
Free Email: [email protected]
Keep this user manual for future reference or product sharing carefully. Do the same with
the original accessories for this product. In case of warranty, please contact the dealer or
the store where you bought this product. Warranty 2 years
Enjoy your product * Share your experience and opinion on one of the well-known
internet portals.
Hints for Environment Protection: Packages materials are raw
materials and can be recycled. Do not disposal old devices or
batteries into the domestic waste. Cleaning: Protect the device from
contamination and pollution (use a clean drapery).Avoid using rough,
coarse-grained materials or solvents or aggressive cleaner. Wipe the
cleaned device accurately. Distributor: Technaxx Deutschland
GmbH & Co.KG, Kruppstr. 105, 60388 Frankfurt a.M., Germany
Features
Wirelessly transmit phone calls from Bluetooth mobile phones to the car FM stereo
system, for every car type without modification Music transfer via Bluetooth V4.0, USB &
AUX-IN (3.5mm) USB port for charging mobile devices Port for USB flash drive (up to
32GB) with MP3/WMA music files Handsfree function via Bluetooth and via built-in
microphone (switchs to hands-free mode automatically from music playing status when
receiving calls) Remote control for convenient operation Last saved UKW frequency
stays saved “Voice prompts” (= spoken announcement) Easy handling and installation
(just plug it into the 12V/24V socket of a vehicle) LCD display size 20 x 25.5mm (1.1“)
Technical specifications
Bluetooth V4.0 transmitting frequency 2.4GHz (~10m max.) / CSR BC8635
BT / FM: Radiated output power max. 1mW / 50mW
FM frequency range 87.6–107.9MHz (~3m max.) / Frequency stability ±10ppml
Power input DC 12–24V (cigarette lighter socket)
Charger output 5V / 2.1A
Weight / Dimensions 45g / (L) 7.5 x (W) 3.4 x (H) 10.5cm
Contents FMT600BT Transmitter, AUX-IN cable, Remote Control, User Manual

View of device
AUX-IN port
SD Card Slot
Volume + / Volume –
USB Reader
Previous button / Next button
Frequency modulation “M”
Output 5V / 2.1 A
Answer / Hang off
Play / Pause

Using FM Transmitter function
(a) Plug the FM transmitter into the cigarette lighter port or power port of your vehicle.
(b) First tune your radio to a free FM frequency, then match the same frequency to the FM
transmitter.
(c) Insert a USB flash drive, which contains MP3 files, into the USB port. It will play and
transmit the MP3 files automatically. Attention: only the inward USB Port can serve as a
USB Reader!
(d) Line-IN function: Use the provided audio cable to connect a MP3/MP4 player or
another external device to the AUX–IN port of this FM transmitter. When using this function,
you have to stop playback from the USB flash drive, and all functions will be controlled by
the external device.
Using Bluetooth function
Using Bluetooth for the first time, you need to pair your mobile device with this FM
transmitter.
(a) Activate the Bluetooth function on your mobile device. Then search the NEW device.
When the mobile device has detected this FM transmitter with the name "TECHNAXX", pair
the devices by using the original password "0000".
(b) In the music playback mode this FM transmitter will automatically switch to the
telephone mode, when there is an incoming call.
Bluetooth calling
Answer the incoming call Press the blue knob
Hang off a call Press the blue knob
Dial the last number Press 2x the blue knob
When making a call, you can only dial the phone number by your mobile phone, but once
the call is connected, you can use the hands-free function.
Using USB charger function
When this FM transmitter is powered from car lighter socket, connect the USB output port
5V/2.1A of this FM transmitter to your mobile device with a special USB cable** (**not
included). This FM transmitter can be used as charger for mobile devices. ATTENTION:
The USB output port with 5V/2.1A is for charging an external device (e.g. iPad).

Get access to Menu Lists
(a) “Play” mode
While music is playing, press the “M” button for more then 3 seconds to see this menu:
Language select the language you prefer
Contrast change the contrast of the display
Firmware version see the firmware version of the FM transmitter
Tx-Power change the transmission power depending on the region
(Europe, ROW)
Exit select to finish the configuration
(b) “Pause” mode
Music will pause when you press the button. Then press the “M” button for more then
3 seconds to see this menu list:
U-disk Dir select the file to play
Delete file select the file to delete
Delete all select to delete all the file
Language select the language you prefer
Contrast change the contrast of the display
Firmware version see the firmware version of the FM transmitter
Exit select to finish the configuration
How to solve problems
 FM transmitter does not start: Check the fuse first. Exact handling see at the beginning
of the user manual (How to replace the fuse).
 Fuse thread is blown: The fuse has to be exchanged by an equal fuse. Exact handling
see at the beginning of the user manual (How to replace the fuse).
 FM transmitter does not switches on again: Check the function of the cigarette lighter.
 Cigarette lighter has no function: Contact your car garage.
 Problem when operating: First switch off the FM transmitter and then switch it on again.
Warnings
Do not attempt to disassemble the FM transmitter, it may result in short-circuit or even
damage. Do not drop or shake the FM transmitter, it may break internal circuit boards or
mechanics. Keep the FM transmitter in dry and ventilated environment. Avoid high
humidity and high temperature. Also batteries should not be exposed to excessive heat or
direct sunlight. Keep the surface of the FM transmitter clean, but do not use organic
solvents. Keep the FM transmitter away from children.

Remote Control
Most of the function can be fulfilled by the remote control.
ATTENTION (see remote control)
(a) Conversion between regional configurations
This product also supports various regional configurations. Press the “M” button for more
then 3 seconds till the menu appears. Choose “Tx-Power” and then press the “M” button
on the FM transmitter to choose “Europe” (in Europe) or “ROW” ( in the rest of the world).
Then press the “M” button on the FM transmitter to confirm. [The sound quality under
“ROW” is better than under “Europe” mode.]
Folder Switch
Loop mode Selector
EQ Selector
Number Selector
Answer / Hang off # Play / Pause
Channel + / –
Volume + / –
Prev. / Next # (Previous Song / Next Song)

(b) Conversion from Bluetooth to USB flash drive
When the FM transmitter is playing the music from your mobile phone via Bluetooth, press
the “Pause” button on the FM transmitter. After ~ 10 seconds it appears on the screen the
following: “Press M key”. Then press the “M” button. The FM transmitter then will play the
music from USB flash drive.
Quick Using Guide
Operation
Guide FM transmitter Remote Control
Answer / Hang
up a call Press button to answer a call
or to hang off a call Press button.
Play music /
Pause music
Press button to play music.
Press button again to pause
music playback
Press button.
Increase the
volume Rotate clockwise to increase the volume. Press
VOL+ to increase the
volume.
Decrease the
volume Rotate anticlockwise to decrease the volume. Press
VOL– to decrease the
volume.
Set Frequency
Press “M” button first. Then
press to increase the
frequency. Press to decrease
the frequency.
Press CH+ button to increase
by 0.1MHz.
Press CH– button to decrease
by 0.1MHz Or press the numbers
of the frequency what you
desired, then press CH+ button
to confirm.
Choose Music Press to play the next song.
Press to play the previous
song.
Press to play the next
song. Press to play the
previous song. Or press the
number of the song and then
press to confirm.

Choose EQ Support by remote control only Press
EQ button to choose your
favorite EQ.
Change
Loop Mode Support by remote control only Press
button to change to
loop mode.
Change
Language
Press “M” button for more then 3
seconds first. Then choose
“Language
” option by pressing
and . Short press
“Language” to choose the desired
language by pressing a
nd
. Then press “M” to confirm.
Support by FM transmitter only
Change
Contrast
Press “M” button for more then 3
seconds first. Then choose
“Contrast” option by pressing
and . Short press “Contrast” to
choose a contrast setting by
pressing and . Then
press “M” to confirm.
Support by FM transmitter only
Switch Folder
Press “M” button under PAUSE
MODE for more then 3 seconds first.
Then choose “USB-disk Dir” or
“Card Folder” and press “M” button
to confirm.
Choose your desired folder and then
press “M” button to confirm this
folder.
Press Folder+ or Folder–
switch the folder.