Technics SL-1200MK2 Operating manual

ORDER NO. DAD84040076S0
Serv,ce Manual
ISL-1200MK2 is the model for silver type. |*SL-1210MK2 is the model for black type of SL-1200MK2. J
English
Turntable System
SL-1200MK2
[M], [MC],
(
[E], [EK], [XL], [EG], [EB], [EH],
[EF], [El], [XA], [PA], [PE], [PC]
SL-1210MK2
Areas
r* [M]
* [MC]
*[E]
* [EK]
* [XL]
* [EG]
* [EB]
* [EH]
* [EF]
* [Ed
* [XA]
[E], [EG], [EH]
* [PA]
* [PE]
* [PC]
is available in the U.S.A.
is available in Canada.
is available in Switzerland and Scandinavia,
is available in United Kingdom.
is available in Australia,
is available in F.R. Germany.
is available in Belgium.
is available in Holland.
is available in France.
is available in Italy.
is available in Southeast Asia, Oceania, Africa,
Middle Near East and Central South America.
is available in far East PX.
is available in European Military.
is available in European Audio Club. )
Pleaseuse this manual together with the service manual for Model No. SL-1200MK2/1210MK2.
Specifications
• General
Power supply:
Power consumption:
Dimensions:
(WxHxD)
Weight:
Turntable section
Type:
Dirve method:
Motor:
Specifications are subject to change without notice for further improvement.
Weight and dimensions shown are approximate.
120V, AC 60 Hz (For [M], [MC] areas)
110-120/220-240V, 50 or 60 Hz
(For other areas)
14W (For [M], [MC] areas)
13.5 W (For other areas)
45.3 x 16.2 x 36 cm
(17-27/32" x 6-19/64" x 14-11/64")
12.5 kg (27.6 Ib)
Quartz direct drive
Manual turntable
Direct drive
Brushless DC motor
Turntable platter: Aluminum diecast
Diameter 33.2 cm (13-5/64")
Weight 2 kg (4.4 lb}
33-1/3 rpm and 45 rpm
1.Skg,cm (!.31b.in)
0.7 s. from standstili to 33-1/3 rpm
Electronic brake
0,01%WRMS*
0.025%WRMS (JIS C5521)
_+0.035% peak (IEC 98A Weighted)
* This rating refers to turntable assembly alone, excluding effects
of record, cartridge or tonearm, but including platter.
Measured by obtaining signal from built-in frequency generator
of motor assembly.
Rumble: --56 dB {IEC 98A Unweighted)
--78 dB (IEC 98A Weighted)
Turntable speeds:
Starting torque:
Build-up characteristics:
Braking system:
Wow and flutter:
Technics
Matsushita Engineering and
Service Company
50 Meadowland Parkway,
Secaucus, New Jersey 07094
Panasonic Hawaii Inc.
91-238 Kauhi St. Ewa Beach
P.O. Box 774
Honolulu, Hawaii 96808-0774
Matsushita Electric
of Canada Limited
5770 Ambler Drive, Mississauga,
Ontario, L4W 2T3
Panasonic TOkyo
Matsushita Electric Industrial Co., Ltd.
1-2, t-chorea, Shibakoen, Minato-ku, Tokyo !05 Japan
Panasonie Sales Company,
Division Of Matsushita Electric
of Puerto Rico, Inc.
Ave, 65 De Infanteria, KM 9.7
Victoria Industrial Park
Carolina, Puerto Rico 00630
Matsushita Electric Trading Co., Ltd.
P.O. Box 288, Centra| Osaka Japan

•Tonearm section
Type:
Effective length:
Arm height adjustment
range:
Overhang:
Effective mass:
Offset angle:
Friction:
Tracking error angle:
Universal
230 mm (9-1/16")
0--6ram
15 mm (19/32")
12 g (without cartridge)
22 °
Less than 7 mg (lateral, vertical)
Within 2o32 '(at the outer groove of
30 cm (12") record
Within 0o32 ' (at the inner groove of
30 cm (12") record
Stylus pressure
adjustment range: 0-- 2.5 g
Applicable cartridge
weight range: 6-- 10 g
13.5 -- 17.5 g (including headsheli)
(with auxiliary weight): 9.5 -- 13 g
17 -20.5 g (including headhsell)
(with shell weight): 3.5 -- 6.5 g
11 -- 14 g (including headshell)
Headshell weight: 7.5 g
Notes
*To improve the performance of SL-1200MK2/1210MK2, the bottom structure and circuit are changed in the course
of production.
* After the change, SL1200MK2-A/1210MK2-A is indicated in the name plate asthe model of the set.
It is discriminated from before-changesetby -A. Also, checkthat the presentchange is of the setsafter the change
mark [] shown in the sirialNo. sheet attached to the bottom and carton box.
_r This supplement servicemanual contains the bottom plate disassemblyprocedure, changepart No., circuit diagram,
P.C.B. and block diagrams. The other contents are the sameas for the servicemanual of SL-1200MK2/1210MK2
already issued.
* Setswith cartridge (EPC-207C) are included in those for same areas.
* Since the power transformer fitting method isdifferent for setswith serial number sheetchange mark [], refer to
the development plan on page 8.
Serial No. sheet
oooooo!o o
, _ER.No.
Chan emark
@
Serial No. sheet
Deutsch
TECHNISCHE DATEN
•AIIgemeine Daten
Stromversorgung:
Leistungsaufnahme:
Abmessungen :
(BxHxT): 45,3x 16,2x36cm
Gewicht: 12.5 kg
• Plattenspieler
Typ:
Antrieb:
Motor:
Plattenteller:
_,nderungen der technischen Daten vorbehalten.
Die angegebenen Gewichts- und Abmessungsdaten sind ungef_ihre Werte.
110-120/220-240 V, 50/60 Hz
Wechselstrom
13,5 W
Manueller Quarz-Direktantrieb-
Plattenspieler
Direktantrieb
Kollektorloser Gleichstrommotor
Aluminium-Spritzgu&
Durchmesser 33,2 cm
Gewicht 2 kg
Plattenteller-Drehzahlen: 33-1/3 und 45 U/min
Anlautdrehmoment: 1,5 kg • cm
DrehzahI-Hochlaufzeit: 0,7 s. vom Stillstand auf 33-1/3 U/rain
Bremssystem : Elektronische Bremse
Gleichlaufschwankungen: 0,01% WRMS*
O,025%WRMS (JIS C5521)
+ 0,035% Spitze (IEC 98A bewertet)
• Diese Nennleistung bezieht sich auf das Laufwerk-Bauteil allein,
ausschlie&lich Einfl_Jsse von Schallplatte, Tonabnehmer oder
Tonarm, aber einschJiel'_lich Plattenteller.
Gemessen anhand von Signalen vom eingebauten
Frequenzgenerator des Motorbauteils.
RumpeI-Ger_iusch-
spannungsabstand: --56dB (IEC 98A unbewertet)
--78 dB (I EC 98A bewertet)

• Tonarm
Typ:
Effektive L_nge:
Tonarmh6he-
Einstellbereich :
Oberhang:
Effektive Masse:
Spurfehlwinkel:
Kr6pfungswinkel :
Lagerreibung :
UniversaI-Tonarm
230 mm
O-6mm
15 mm
12 g (ohne Tonabnehmer)
2°32 'bei der EinIaufritle einer
30 cm-Platte
0o32 ' bei der Auslaufrille einer
30 cm-Platter
22 °
Weniger als 7 mg (horizontal, vertikal)
Auflagekraft-
Einstellbereich:
Zuliissiger Tonabnehmer-
Gewichtbereich :
(mit Zusatz-
Gegengewicht) :
Gewicht bereich :
(mit Zusatzgewicht )
Tonarmkopf-Gewicht:
O-- 2,5g
6-- 10g
13,5 -- 17 g (einschliel_lich Tonarmkopf)
9,5 - 13g
17 - 20.5 g (einschlieP_lich Tonarmkopf)
3,5 - 6.5 g
11 - 14 g (eieschIie!_lich Tonarmkopf)
7,5 g
Francais
CARACTERISTIQU ES Les specifications sont susceptibles d'6tre modifi@s sans pr_avis.
• G6ndralit_s
Alimentation:
Consommation:
Dimensions:
(LxH×P)
Polds:
•Platine de lecture
Le poids et les dimensions donn_s sont approximatifs.
•Bras de lecture
Type:
Syst6me d'entrainement:
Moteur:
Plateau de lecture:
Vitesses de rotation:
Couple de d6marrage:
Caract6ristiques
d'augmentation:
Syst_me de freinage:
Pleurage et scintillement:
AIternatif 110-120/220-240 V, Type:
50 ou 60 Hz Longueur effective:
13,5 W Pottle du r6glage de la
45,3 x 16,2 x36 cm hauteur de bras:
Porte-_-faux:
12,5 kg Masse r6elle:
Angle d'erreur de piste:
EntaTnement direct _ quartz
Platine manuelle
Entrainement direct
Moteur C.C. sans balai
Alum]nium mouI6 sous pression
Diam¢tre 33,2 cm
Poids 2 kg
33-1/3 et 45t/p.m.
1,5 kg • cm
0,7 s. (rotation de 90 °) _ 33-1/3 t/p,m.
Frein _lectronique
0,01% de valeur efficace*
0,025% de valeur efficace (JIS C5521 )
+ 0,35% de crete (IEC 98A Ponder6}
Angle de d6calage:
Frottement:
Plage de r6glage de la
pression d'appui:
Gamme du poids de la
cellule pick-up
utilisable:
(avec contrepoids
auxiliaire):
(avec contrepoids de
la cellule):
Poids de la cellule:
*Ce r6gime nominal se rapporte _ I'ensemble du tournedisque
seul, excluant les effets du disque, de la cellule pick-up ou de
bras de lecture, mais comprenant le plateau.
Mesur6 par I'obtention d'un signal provenant du g6n_rateur
de fr_quences incorpor_ de I'ensemble du moteur.
Ronflement: --56 d B (IEC 98A Non ponderS)
--78 dB (IEC 98A PonderS)
Bras de lecture universel
230 mm
0--6am
15 mm
12 g (sans la cellule pick-up)
En de.c& de 2032 , au sillon ext_rieur
d'un disque de 30 cm
En dec& de 0o32 , au silion int_rirue
d'un disque de 30 cm
22 °
Moins de 7 mg (lat6ral et vertical}
0-2.5g
6- 10g
13,5 -- 17,5 g
(y compris Ia coque porte-cellule
9,5-- 13g
17 -- 20,5 g
(y compris la cdque porte-cellule
3,5 - 6,5 g
11 -14g
(y compris la coque porte-cellule
7,5 g

EspaSol
ESPECI FICACIO NES
•_n general
Las especificaciones quedan sujetas a cambios sin aviso previo.
Alimantaci6n de
corriente:
Consumo de corriente:
Dimensiones:
(Aneho × Alto xProf.)
Peso:
El peso y las dimensiones indicados son aproximados.
• Secci6n del brazo sonoro
110-120/220-240 V, 50 660 Hz
13,5 W
45,3 x 16,2 x 36 cm
12,5 kg
• Seccibn del plato giratorio
Tipo:
M6todo de accionamiento:
Motor:
Platillo del plato giratorio:
Velocidades del plato
giratorio:
Par motor de arranque:
Caracteristicas de
establecimiento:
Plato giratorio manual de
accionamiento directo por cuarzo
Accionamiento d irecto
Motor de corriente continua sin
escobillas
Aluminio fundido
Di_metro 33,2 cm
Peso 2 kg.
33-1/3 y 45 rpm
1,5 kg • cm
0,7 s. (a partir de reposo) hasta
33-1/3 rpm"
Freno electrTnico
0,01% WRMS*
0,025% WRMS (JIS C5521)
+ 0,035% cresta {IEC 98A Ponderado)
Sistema de frenado:
Ululaciones y tr6molo:
Tipo:
Longitud efectiva:
Radio de ajuste de
altura del brazo:
Parte saliente:
Masa efectiva:
Angulo de descentra-
miento:
Fricci6n:
Angulo de error de
seguimiento:
Radio de ajuste de la
persi6n de la aguja:
Radio de peso de
cartucho utilizable:
(con contrapeso de
balance de reserva):
(con contrapeso de
la cdpsula):
Peso de la c_psula de
la cabeza:
*Estas caracteristicas se refieren 6nicamente al con junto del plato
giratorio, con exclusi6n de los efectos provenientes del disco,
cartucho o del brazo sonoro, incluyendo, empero, el platillo.
La medida fue tomada por medio de la seSal obtenida del
generador de frecuencia incorporado del conjunto del motor.
Ruido de rodadura: --56 dB (IEC 98A No Ponderado)
-78 dB (IEC 98A Ponderado)
Brazo sonoro universal
230 mm
0-6mm
15mm
12 g. (sin cartucho)
22 °
Menos de 7 mg.
(en sentido lateral y vertical)
inferior a 2°32 'en el surco exterior
de un disco de 30 cm
Inferior a 0032 ,en el surco interior
de un disco de 30 cm
Oa 2,5g.
6alOg.
13,5a17,5g.
(incluyendolac_psuladelacabeza)
9,5a 13g.
17 a 20,5 g
(incluyendo la c_psula de la cabeza)
3,5 a 6,5 g
11a14g
(incluyendo Ia c_psula de la cabeza)
7,5 g
CHANGES
• DISASSEMBLY INSTRUCTIONS @ 9 @ @x6
0 _)x 11
• base.H°wto remove the bottom cover and bottom \|j _l_li'iI___ [_11i'_ i_i'_ i
x4 O
Insulator x 4
1. Remove the turntable mat and turntable.
2. Turn over the body on a soft cloth thaking care not to
damage the dust cover.
3. Remove the insulators and the 21 setscrews (Fig. 1 •
0,_,_1) of the bottom cover.
4. Remove the 6 setscrews (Fig. 2 : _])) of the bottom base.
Bottom cover
Fig. 1

•How to remove the hinge case
1. Remove the bottom cover. (Refer to "How to remove
the bottom cover".)
2. Remove the 4 setscrews (Fig. 2 : O) of the hinge case
bracket.
3. Remove the 4 setscrews (Fig. 2: O) of the hinge case.
Note: The other disassembly procedure are the same as
for before-change sets.
O
O
O
Hinge case
Bottom base
• REPLACEMENT PARTS LIST
Notes:
1. This parts list mentions only the difference between
before and after change of SL-1200MK2/1210MK2.
2. (_)-marked parts are used only for SL-1210MK2 (black
type). And O-marked parts are used for SL1200MK2
(silver type).
3. Parts other than (_- and O-marked are used for both
SL-1210MK2 and SL-1200MK2.
4. The "(_" mark is service standard parts and may differ
from production parts.
Ar_$
r. [M]
* [MC]
* [E]
* [EK]
* [XL]
* [EG]
* [EB]
* [EH]
* [EF]
* [Eli
* [XA]
* [PA]
*[PE]
[PC]
Fig. 2
is available in the U.S,A.
is available in Canada.
is available in Switzerland and Scandinavia.
is available in United Kingdom.
is available in Australia.
is available in F.R. Germany,
is available in Belgium,
is available in Holland,
is available in France,
is available in Italy.
is available in Southeast Asia, Oceania, Africa,
Middle Near East and Central South America.
is available in far East PX.
is available in European Military.
is available in European Audio Club. ,,
Change of,Part No.
Ref. No. SL-1200M K2
(Before Change)
INTEGRATED CI RCUIT
1C302 SV ITC401 ! BP
TRANSISTOR
2SD389A-QQ1
DIODES
D1
D201,202
D203 _ 206
D401
CRYSTAL
x201
=IbSL-1200MK2/1210MK2
m __ (After Change)
MN4011B
2SD1265
Part
NAND Gate
Regulator
Name & Description Per Set
(Pcs.)
SVDS1 RBA40
SVDSR--105C
SVDEBR5505S
SVDG L--9PG2
SVDS1 R BA20Z
SVDPR3902S--9
SVDSLH54VT3
SVDGL--9NG2
Rectifier
Speed Indicator
Strobe
Pitch Indicator
SVQU306115
VARIABLE RESISTORS
SVQMS4193 4,193 MHz, Oscillator
1
1
2
4
I
L 1
Remarks
VR301 EVMH2GA00B53 EVMH1GA00B23
VR303 EVBJ05C19ABE SFDZ122N11
SWITCHES
$203 SF DSSS5G L13C SFDSSS01G L13
$601 SFDSSS5G L13S SF DSSS5G L13P
Pitch Control Adjustment, 2k£ (B)
Pitch Control
Start!Stop
Power
TRANSFORMER
1
1
1
1&
T1
T1
T1
SLTCOEU7B
SLT60E31C
SLTF5900
SLT66OTL3A [M]
SLT66DT14C [MC]
SLT66DTE13A [Other areas]
Power Source
Power Source
Power Source
1
1
1
A
&
A

Ref. No.
RESISTO RS
Change of Part No.
SL-1200MK2 ..L SL-1200MK2/1210M K2
(Before Change) "='7" (After Change)
Part Name &Description PerSet
(Pcs.)
R4
R209
R211
R212
R222
R301
R304
R401
R601
ERD25FJ561
ERD25TJ154
ERD25FJ103
ERD25FJ121
Addition
ERO25CK F3301
ERD25FJ152
Addition
ERD25FJ4R7
ERD25FJ471
E RD25TJ334
E RD25 FJ472
ERD25FJ151
ERD25FJ391
ERQ25CKF2701
E RD25 FJ561
ERD50FJ152
ERDSOFJ4R7
Carbon, 1/4W, 470_
Carbon, 1/4W, 330k£
Carbon, 1/4W 4.7k£
Carbon, 1/4W, 150£
Ca rbo n, 1/4W, 390£
Metal Film, 1/4W, 2.7k_
Carbon, 1/4W, 560£
Carbon, 1/2W, 1.5k_,
Carbon, 1/2W, 4,7_
CAPACITORS
1
1
1
1
1
1
1
1
1
C5,6
C104 _ 107
iC109,110
IClll
iC204
C210
C211
C217_219
C301
iC302
iC305
Add ition
ECQM1H104KZ
ECQM1H104KZ
ECQM1 H562KZ
ECQM1H473KZ
ECQM1H224KZ
ECQM1 H473KZ
Addition
ECQK1123FZ
ECQK1123FZ
ECQM1H122KZ
ECQM1223KZ
ECQM1H104JZ
ECQM1H104JZ
ECQM 1H562JZ
ECQM1 H473JZ
ECQM1 H224JZ
ECQM1 H473JZ
ECKD1H104ZF
ECQK1333GZ
ECQK1682GZ
ECQM1 H122JZ
Polyester, 125V, 0.022#F
Polyester, 50V, 0.1 #F
Polyester, 50V, 0.1/_F
Polyester, 50V, 0.0056#F
Polyester, 50V, 0.047/_F
Polyester, 50V, 0.22/_F
Polyester, 50V, 0.047p, F
Ceramic, 50V, 0.1 #F
Polyester, 125V, 0.033/_F
Polyester, 125V, 0.0068_F
Polyester, 50V, 0.0012#F
1
4
2
1
1
1
1
1
1
1
1
CABIN ET and CHASSIS PARTS
9 SFUP122-12
10 SFAC122--01
25 SFXB122--02
33 SFQA001-02
SFUP025--01
36 SFUP025X01
38 SFUP132-03
40 SFUP122-10
42 SFKK122-03
48
48--1
49
50
51
55
56
57
58
SFAU122--01
Addition
SFUP122-05
SFUP122-04
SFUM170--07
SFNN122M01
SFNN122C01
SFNN122S01
SFNN122L01
SFNN122X01
Addition
Addition
SFNN122N01
Addition
Addition
SFX0122--01
SFX0122-02
SFAT122--01A
Deletion
SFAC122--01
SFAC124S01
SFXB122--06
SFQA122--03
SFUP122--16 [M, MC, PA, PE, PC]
SFUP122X01 [Other areas]
SFGC122--03
Deletion
SFKK122--03
SFKK124S01
SFAU122--02
SFAU122--03
SFUP122-23
SFUP122--24
SFUMM02N04
SFNN122M10 [M]
SFNN122C10 [MC]
SFNN122S10 [E]
SFNN122G10 [EK, XL]
SFNN122X10 [XA]
SFNN122P10 [PA, PE]
SFNN122P11 [PC]
SFNN122N10 [Other areas]
SFNN124S10 [E]
SFNN124Q10 [EG, EH]
Deletion
Deletion
SFATM02N01 A
Cabinet (Silver)
Cabinet (Black)
Boss, Drive
Spring
Bracket, AC Cord
Bracket, AC cord
Cushion
................................
Plate (Silver)
Plate (Black)
Bottom Base
Bottom Cover
Supporter (A), Hinge.
Supporter (B), Hinge
Case, Hinge
Name Plate
Name Plate
Name Plate
Name Plate
Name Plate
Name Plate
Name Plate
Name Plate
Name Plate
Name Plate
................................
Hinge
0
1
1
1
1
1
1
2
0
1
1
1
1
2
2
2
1
1
1
1
1
1
1
1
1
1
0
0
1
Remarks
®
®
®
®
®
®
®
®
A®
&
®
®
®
®
®
®
®
®
O
®
O
O
O
O
O
O
O
O
®
®
--6--

Ref. No. Change of Part No.
SL-1200MK2 _SL-1200MK2/1210MK2
(Before Change) == (After Change)
Part Name & Description Per Set
(Pcs.)
TONEARM PARTS
SFPAM18201K
62 SF PAM18201 K SFPAM18202K
79 SFPK B17201S i SFPK B17204E
SFGK1 32--01
82 SFG K132-01 SFG K133S01
ACCESSORIES
SFNU122M01
SFNU122C01
A1 SFNU122S01
SFNU122G01
Addition
SFNU122X01
A2 SFWE010
Tonearm Ass'y (Silver)
Tonearm Ass'y (Black)
Ring, Arm Base Operation
Cap (Silver)
Cap (Black)
1
1
1
1
1
SFNU122M06
SFNU122C06
SFNU122S01
SFNU122G01
SFNU122P01
SFNU122X01
SFWE122-01
[M]
[E]
[EK]
[PA, PE, PC]
[Other areas]
Instruction Book
Instruction Book
Instruction Book
Instruction Book
Instruction Book
Instruction Book
45 Adaptor
1
1
1
1
1
1
1
PACKING PARTS
P1
P9
P10
Pll
P12
P13
SFHP122C01
SFHP122M01
Addition
Add ition
Addition
Addition
Addition
SFHP122C02
SFHP122M02
SFHP124S02
SPB1083
SPJ15
SFHZD03M01
SFHZ122--01
SPP189
[MC, EF]
[Other areas]
Carton Box (Silver)
Carton Box (Silver)
Carbon Box (Black)
Polyethylene Bag, Accessories
Polyethylene Bag, Shell Weight
Polyethylene Bag, Dust Cover
Polyethylene Bag, 45 Adaptor
Polyethylene Bag, Cords
1
1
1
2
1
3
1
2
•ADJUSTMENT POINTS
Remarks
O
®
O
®
O
O
®
Pitch control
4- 0% adjustment Pitch control
Circuit board
Brake adjustment
6
7
Pitch control
gain adjustment
Fig. 4 (Abb. 4)
Drive circuit board
Fig. 3 (Abb. 3)

MEASUREMENTS AND ADJUSTMENTS English
•Conditions of set, and instruments used
1. Remove the panel cover.
2. Removethe bottom cover (when adjustingthe pitch
control gain).
3. Frequency counter
4. Tester
IParts Procedure
Adjustment Connection adjusted
Pitch control + 0%
adjustment
Pitch control gain
adjustment
Brake adjustment
Frequency counter
(+) - TP27
(-) - Earth point
Tester
(+) - CN102 terminal _)
(-) - CN102 terminal (_)
VR301
(Fig. 3)
VR302
(Fig. 4)
VR201
(Fig, 3)
1. Connect the frequency counter and turn the
power supply ON.
2. Set the pitch control knob to "0".
(Indicator lights up.)
3. Adjust VR301 so that the frequency is
262.08 kHz+ 0.05 kHz.
1. Set the pitch control knob to "0".
2. Pull out the connector CN102 of drive P.C.B.
3. Connect the tester to terminals,(_)and(_)of
connector CN102 on the pitch control P.C.B.
side.
4. Adjust VR302 so that the resistance value of
the tester is 2.7 k,Q + 0.1 k_.
1. Adjust VR201 so that the rotation at
33 r.p.m, stops within the angle of 90 ° _120 °
after depressing the stop button.
•MESSUNGEN UND JUSTIERUNGEN
• Zustand des Ger_ites und zu verwendende Instrumente
1. Die Abdeckplatte entfernem
2. Die Bodenadbeckung entfernen (wenn die Drehzahlregelungs-
Verst_rkung justiert werden soil).
3. Frequenzz_ihler
4. Priifger_t
Deutsch
Zu justie- Vorgehen
Justierung AnschliJsse render Teile
_+_0%-Justierung des
Drehzahlreglers
Justierungder
Drehzahlregelungs-
Verstiirkung
Bremsjustierung
Frequenzz_ihler
(+) - TP27
(-) - Massepunkt
PriJfger_it
(+) - CN102 Anschlul& (_)
(-) - CN102 Anschlul& (_)
VR301
(Abb. 3)
VR302
(Abb. 4)
VR201
(Abb. 3)
1. Frequenzz_hler anschliel_en und Netzschalter
einschalten.
2. Drehzahlreglerknopf auf "0" stellen.
(Anzeige leuchtet auf.)
3. VR301 so justieren, dal_ die Frequenz
262,08 kHz + 0,05 kHz betr_gt.
1. Den Drehzahireglerknopf auf "0" einstellen.
2. Steckverbindung CN102 yon der
Antriebsplatine hrausziehen.
3. PrLifger_t an AnschliJsse(_und(_der
Steckverbindung CN102 auf der
Drehzahlreglerseite der Platine anschlie6en.
4. VR302 so justieren, dal_ der Widerstandswert
des PriJfger_ites 2,7 k_ + 0,1 k,Q betr_gt.
1. VR201 so justieren, dal_ die Rotation bei
33 UPM innerhalb 90 ° _ 120 ° nach Driicken
der Stop-Taste stoppt.
--8--

[] MESURAGES ET REGLAGES
•Conditions de I'appareil et appareils utilis_s.
1. Retirer le panneau de protection.
2. Retirer le panneau de protection inf_rieur (Iors de I'ajustement
de I'amplification du r_glage d'_cart).
Mise au point
Ajustement de + 0%
du r_glaged'_cart
Ajustement de
I'amplification du
r_glage d'_cart
3 Ajustement du frein
Raccordement"
Compteur de fr_quence
(+) - TP27
(-) - Point de contact
la terre
Appareil contrSleur
(+) - Borne CN102
(-) - Borne CN102 (_
Elements
regler
VR301
(Fig. 3)
VR302
(Fig. 4)
VR201
(Fig. 3)
Franqa is
3. Compteur de fr_quence
4. Appareil contr61eur
Marche _ suivre
1. Raccorder le compteur de fr_quence et mettre
en marche I'alimentaiton.
2. R_gler le bouton du r_glage d'_cart sur "0".
(L'indicateur s'_clairera.)
3. Ajuster VR301 de te'lle sorte que la fr_quence
soit de 262,08 kHz + 0,05 kHz.
1. R_gler le boutod de r_glage d'_cart sur "0".
2. R etirer le connecteur CN 102 de la plaquette
circuits imprim_s de commande.
3. Raccorder I'appareil contrbleur aux bornes
(_ et _ du connecteur CN102 sur le cbt_ de
la plaquette _ circuits imprim_s du r_glage
d'_cart.
4. Ajuster VR302 de telle sorte que la valeur de
r_sistance de I'apparei! contr61eur soit de
2,7 k_, + 0,1 k_,.
1, R6gler VR201 de telle sorte que la rotation
,_33 t/p.m, s'arr6te en de_ d'un angle de
90 ° _ 120 ° apr_s avoir appuy_ sur la touche
d'arr_t.
MEDICIONES Y AJUSTE
•Condiciones de aparato einstrumentos usados
1. Remover la cubierta del panel.
2. Remover la cubierta inferior (al ajustar la ganancia de
Espa ol
3. Contador de frecuencia
4. Probador
control de altura de los sonidos).
Piezas
Ajuste Conexibn ajustadas Procedimiento
Ajuste + 0% de
control de altura
Ajuste de ganancia
de control de altura
Ajuste de freno
Contador de frecuencia
(+) - TP27
(-) - Punto de tierra
Probador
(+) --Terminal de CN102
(-) -Terminal de CN102 _'
VR301
(Fig. 3)
VR302
(Fig. 4)
VR201
(Fig. 3)
1. Conectar el contador de frecuencia y prender
la fuente de alimentacibn.
2. Ajustar la perilla de control de altura de
sonidos a "0". (El indicador se ilumina.)
3. Ajustar VR301 de manera que la frecuencia
sea 262,08 kHz + 0,05 kHz.
1. Poner el control de altura de sonidos en "0".
2. Sacar el conector CN102 de T.C.I. de
accionamiento.
3. Conectar el probador a terminales,(_)y_de
conector CN102 del lado de T.C.Io de control
de altura.
4. Ajustar VR302 de manera que el valor de
resistencia del probador sea 2,7 k_ + 0,1 k_.
1. Ajustar VR201 de manera que la rotaci6n a
33 r.p.m, se pare dentro de! _ngulo de
90 ° _ 120 despues oprlmlr el bot6n de parada.
m9m

Notes:
RESISTORS AND CAPACITORS
1. Part numbers are indicated on most mechanical parts.
Please use this part number for parts orders.
2. Important safety notice:
Components identified by ,,4k mark have special characteristics
important for safety. When replacing any of these components
use only manufacturer's specified parts.
3. The "_'" mark is service standard parts and may differ from
production parts.
4. Bracketed indications in Ref. No. colum specify the area.
Parts without these indications can be used for all area.
5. The unit of resistance is £ (ohm}.
K = 1000,Q, M = 1000k,Q,
6. The unit capacitance is/_F (microfarad).
P = 10 -6 ,u.F
Numbering System of Resistor
Example
ERD 25 F J
Type Wattage Shape Tolearance
ERX 2 AN J
Type Wattage Shape Tolerance
101
Value
2R2
Value
ArMs
f* [M] is available in the U.S.A.
*[MC] is available in Canada.
* [E] is available in Switzerland and Scandinavia.
* [EK] is available in United Kingdom.
* [XL] is available in Australia.
* [EG] is available in F.R. Germany.
* [EB] is available in Belgium.
* [EH] is available in Holland.
* [EF] is available in France.
* [El] is available in Italy.
* [XA] is available in Southeast Asia, Oceania, Africa,
Middle Near East and Central South America.
* [PA] is available in far East PX.
* [PE] is available in European Military.
[PC] is available in European Audio Club.
Numbering System of Capacitor
Example
ECKD 1 H 102 Z F
Type Voltage Value Tolerance Peculiarity
ECEA 50 MR47 R
Type Voltage Reculiarity use Value Special use
Resistor type
ERD: Carbon
ERG: Metal Oxide
ERO: Metal Film
ERX: Metal Film
Wattage
25 : 1/4W
50 : 1/2W
1A: 1W
2A : 2W
Tolerance
F : +1%
J : +5%
Capacitor Type
ECEA
ECEB
ECCD
ECQM
ECQU
ECQF
ECNC
: Electrolytic
:Electrolytic
: Ceramic
: Polyester
: Polyester
: Polyester
: Polyester
OJ
lC
1E
1H
1
1A
4A
Voltage
: 6.3V
:16V
: 25V
: 50V
: 100V
: 125V
: 400V
Tolearnce
J : -+5%
K:-+5%
M : -+20%
Z: +80%,--20%
Ref. NO
RESISTORS
R1
R2
R3
R4,5
R101
R102
R103
R104
R105
R106
R107
R108
R109,110
R201
1R202
R203
R204
iR205
iR206
iR207
iR208
R209
Part NO. Ref, No.
R210
R211
R212
R213
R214
R215
R216
R217
R2!8
R219
R220
R221
R222
R301
R302
R303
R304
R305
Pad No.
_S_ ERD25TJ183
Value
18K
4.7K
150
1.2K
22K
4.7K
150K
22K
1K
3.3K
220
470
390
2.7K
470
8.2K
560
180
Ref. No. Part No.
CAPACITORS
I Value
470
33
22
0.022
33
33
0.1
0.1
100
01
C211
C212
C213
IC214
!C215
C216
C217,218
C219
C301
Ref. No. Part No.
C210 (._ ECQMi H224JZ
_, ECQM1H473JZ
ECEA1HU3R3
__) ECCD1H471K
ECEAICU101
ECEA1HU010
ECEA1CU470
ECKD1 H104ZF
ECKD1 H104ZF
ECQK1333GZ
C302 ECQK1682GZ
C303 ECEA1HU010
C304 ECEA1CU100
C305 CS) ECQMIH122JZ
C306 ECEA1HU010
ECQF1A473MD
ECQU1A47ME
ECNC4A473M
C601 [M] /_
C601 (MC) Z_
C601 [Other
ares] /?x
I Value
ERD25FJ562 5.6K
ERD25FJ682 6.8K
ERD25FJ272 2.7K
ERD25FJ471 470
_}_ ERD25FJ103 10K
ERXlANJ4R7 4.7
_) ERD25FJ472 47K
ERD25TJ473 47K
ERD25FJ103 10K
_P ERD25FJ150 15
ERXlANJIR5 15
CS_ERD25FJ103 10K
(_) ERX1ANJ4R7 4.7
_-_ ERGIANJ561 560
ERD25FJ103 10K
_f_JJERD25FJ470 47
ERD25FJ272 27K
ERD25TJ124 120K
(_ ERD25TJ183 18K
_) ERD25TJ563 56K
(_ ERD25TJ224 220K
_) ERD25TJ334 330K
R306
R307
R401 /_
R601 Z_
_) ERD25FJ472
_) ERD25FJ151
¢_S)ERD25FJ122
ERD25TJ223
_) IERD25FJ472
L_ ERD25TJ154
ERD25TJ223
(_) ERD25FJ102
ERD25FJ332
ERD25FJ221
ERD25FJ471
ERD25FJ391
ERO25CKF2701
ERD25FJ471
ERD25FJ822
ERD25FJ561
ERD25FJ181
ERD25TJ223
ERD25FJ272
ERD50FJ152
(_ ERDSOFJ4R7
22K
2.7K
1.5K
4.7
C1 ECEB1 HU471
C2 ECEA1 EU330
C3 ECEAIEU220
C5,6 ECQM1223KZ
Cl 01 ,! 02 ECEA1 EU330
C103 ECEA1EU330
C104,105 rs_ ECQM1H104JZ
C106,107 @ ECQM1H104JZ
C108 ECEA1 EUI01
C109,110 r_ ECQM1HIO4JZ
Clll _ ECQMIH562JZ
C112 ECEA1 H U4R7
C201 ECEA1 C U330
C202,203 ECEA1 HU010
C204 _ ECQMIH473JZ
C205 ECEAOJU221
C206 ECEA1 HU010
C207 _ ECCDIH101K
C208 _ ECCDIH220K
C209 ECEAICU101
0.0056
4.7
33
1
0.047
220
1
100P
22P
100
Value
0,22
0,047
3.3
470P
100
1
47
0.1
0,1
0.033
0.0068
1
10
0.0012
1
0.047
0.047
0.047
10

[] REPLACEMENT PARTS LIST
Notes: 1. Part numbers are indicated on most mechanical parts.
Please use this part number for parts orders.
2. Important safety notice:
Components identified by A mark have special characteristics
important for safety. When replacing any of these components
use only manufecturer°s specified parts.
3. Bracketed indications in Ref. No. columns specify the area.
Parts without these indications can be used for ell areas.
4. The "'(_" mark is service standard parts and may differ from
production parts.
5. The parenthesized numbers in the column of description stand
for the quentity per set.
6. _ -marked parts are used only for SL-1210MK2 (black type).
And Omarked parts are used for SL-1200MK2 (silver type),
7. Parts other than®-and Omarked are used for both
SL-1210MK2 and SL-1200MK2,
Areas
*[M] is available in the U.S.A.
*[MC] is available in Canada.
*[E] is available in Switzerland and Scandinavia.
*[EK] is available in United Kingdom.
*[XL] is available in Australia.
*[EG] iS available in F.R. Germany.
*[EB] is available in Belgium.
*[EH] is available in Holland,
*[EF] is available in France.
*[El] isavailable in Italy.
*[XA] isavailable in Southeast Asia, Oceania, Africa,
Middle Near East and Central South America.
*[PA] is available in far East PX.
*[PE] is available in European Military.
*[PC] is available in European Audio Club.
Ref. No, Part No. Description Ref. No. Part No. Description Ref. No. Part No. Description
CRYSTAL
X201 SVQMS4193
INTEGRATED CIRCUITS
IC101 AN6675
IC201 AN6680
IC301 AN6682
IC302 MN4011 B
TRANSISTORS
Q1 2SD1265
Q2,3 2SD637
Q201 _2SC1846-R
iQ202 2SD637
Q203 _2SC1328-T
DIODES
D1 Z_ SVDSIRBA20Z
D2 MA1051
D201,202 SVDPR3902S-9
D203_206 SVDSLH54VT3
D204A MA162A
D301 MA1051
D401 SVDGL-9NG2
Turntable Drive
Turntable Control
Pitch Control
NAND Gate
Regulator
Regulator
Regulator
LED Driver
FG Amp.
Rectifier
5.1V Zener
Speed Indicator
Strobe
Switching
5.1V Zener
Pitch Indicator
VARIABLE RESISTORS
VR201 (_ EVTS3MA00B54
VR301 EVM H 1GAOOB23
VR302 (_ EVTS3MA00B54
VR303 SFDZ122N 11
SWITCHES
$201,202 EVQP5R04K
$203 SFDSSS01 GL13
_401 SFDSD2MSL-C
$601 /_ SFDSSS5GL13P
$602 Except ,/_ SFDSHXW01317
for[M,MC]
4.193MHz
JOscillator
Brake
Adjustrnent_50k_3(B)
Pitch Control---i---0%
Adjustment,2kQ(B)
PitchControlGain
AdjustmentS0kO(B)
Pitch Control
Speed Selector
Stort/Stop
Stylus-Illuminator
Power
Voltage Selector
LAMP
PL1 Z_ ISFDN122-01
TRANSFORMER
I'1[M]
I'1[MC]
13[Other areas]
FUSES
FI[MC]
I:1 Except
for [M,MC]
P2Except
for [M,MC]
IStylus Illuminator
Z_ SLT66DTL3A Power Source
/_X SLT66DT14C Power Source
,Ak SLT66DTE13E Power Source
XBAIF12NU14
XBA2C025T1A
XBA2CIOTR0
125V,1.2A
250V,T250mA
250V,T1 A
11

I
Ref. No. IPart No_
CHABINET AND CHASSIS
M,I tC, F
F_,P(
',EK
iOtl _er
mrs;Ls_
M,MC,F
PE,P(
iOther
Ireas_
M,MC]
Evdz_
XL]_,
A,PE_
therare_
43
44
45
46
48
48-
49
50
R1
SFAD122-01A
SFTG172-01
SFTE 172-01
SFUM172-05
i SFMGQ20-01
SFMG520-31 A
SFMZ172-01E
SFMZQ20-01A
LSFAC122-01
SFAC124S01
SFUM172-04
SFKT122-01
SFKK122-01E
SFKTO15-06
SFQA122-01
SFUM122-01
SFKTO15-01E
SFOJ122-02E
ISFGZ122-01
ISFYB.5-32
iSFQA5_-01
iSFUM122-03
SFUM015-11
SFKK172-01
SFXB122-06
SFQA172-01
SFXJ172-01
SFUP122-02E
SFUP122-03
SFDJ122-03E
SFX0172-01
SFQA520-01
iSFQA122-02
SFX3172-05
iSFHK040L
iSFSR-5N-4
SFSR-4N-4
SFUP122-16
SFUP122X01
RJAgY
QFC1205M
SJAG23
$3A83
SJA88
SFGC122-03
SFGC122-01
SFKT122-02
SFKK122-03
, SFKK124S01
i
iSFUZ122-01
SFUP122-09
SFUP122-01
SFDJ122-01E
SFAU122-03
SFAU122-02
iSFUP122-23
iSFUP122-24
Description
PARTS
Dust Cover (1)
Turntable Mat (11
Turntable Platter Ass'y (11
Cover, Cabinet (1)
Cover, Drive Coil (1)
Drive Coil Ass'y (1)
FG Coil Ass'y (1)
Shaft Ass'y, Turntable I1)
Cabinet (Silver)
Cabinet (Black) (1)
Ornament, Stylus "(1)
Illuminator
Knob, Power Switch (])
Case, Strobe Illuminator (1)
Button, Start/Stop (1)
Spring, StarUStop Button (1)
Base, Operation (!)
Button, Speed _3) (1)
Connector, 7pin (1)
Spacer, Rubber (1)
Ball, Switch Cam (!)
Spring, Switch Cam (1)
Cam, Power Switch _I
Spacer, Speed Indicator(2)
Cover,Stylus Illuminator (1)
Boss, Drive (1)
Spring, Drive Boss (1)
Pin, Lock Canceler (1}
Bracket, (1)
Stylus Illuminator (I)
Plate, Lock Operation (11
Connector, 3pin (1)
Pin, Guide (I)
Spring, (1)
Lock Canceler
Spring, (1)
Lock Operation Plate
Pin, (1)
Lock Operation Rate
Clamper, AC Cord 17)
(11
(1)
(t)
(11
(1)
Clamper, AC Cord
Clamper, AC Cord
Bracket,ACCord
IBracket, AC Cord
AC Cord
(2)
(3)
(1)
(t)
(1)
AC Cord
AC Cord
IAC Cord
AC Cord
Rubber,
IPower Transformer
Cushion,
°wlr ;::fi :ji
Ornament (Silver),
Pitch Control
Ornament (Black),
Pitch Controt
Felt (1)
Holder, LED (11
I Bracket, Pitch Control (11
Connector, 4pin (I)
Bottom Base (I)
Bottom Cover (1)
Supporter (A),Hinge (2)
Supporter (B),Hinge (2)
Case, Hinge loi
Ref. No. Part No.
52 SFGC122-02E
54 SFKT015-02E
55[M_ OSFNN122M10
55[MC_ OSFNN122C10
55[E_ GSFNN122S10
55[EK,XL] GSFNN122G10
55 [XA} O SFNN122X10
55 [PA, PE]© SFNN122P10
55 [PC] _SFNN122P11
_[Other Q SFNN122N10
areas)
55[E_ (_) SFNN124S10
55 _ SFNN124010
[EG,EH)
58 SFATM02NOIA
59 SFUP122-25
Description
(4) N31
(I) N32
N33
Name Plate 1) N34
Name Plate (1) N35
Name Plate (1) N36
Name Rate (1)! N37
Name Plate (1} N38
Name Plate (11 N39
Name Plate (1' N40
Name Plate (1: IN41
Name Plate (t) IN42
Name Rate (_ N43
N44
Hinge (2) N45
Plate,Power transformer (11 N46
Insulator
Button, Speed _IS)
TONEARM PARTS
61 SFPCC31001 K
Ref. No. Part No.
XWG3FZ
XSN3+14BVS
(_ XWA3BFZ
SFXG829-1
XSN3+SS
XUCSFT
SFPEV17202
(_ XTN3+25B
SFPEW1 fO0
XSN3+6BVS
_) XWC3BFZ
(_ XSN3+12BVS
(_ XWG3FZ
SFXW701-02
SFPEW00705
XTW26+5E
ACCESSORIES
(1: AI[M} SFNU122M06
AI[MC) SFNU122C06
(t} MCE, EB,EC] SFNU122S01
(1)! &I[EK} SFNU122G01
A1[PA, SFNU122P01
(11 PE,PC_
111 A1[Other SFNU122X01
(1 areas]
(11 A2 SFWED10
(1' A3 SFPEN3302
(11 A4 SFPEW9601
(I', A5 SFCZV8801
(11 A6 SFPEV9801
Ill A7 SFK0135-01
(]', A8 SFPZB3501
(1 A9 Z_ SFDKI19118
(1: [XA] Only
(1', A10 SFPWG17202
A11 Z_, QJP0603S
(1', [PA,PE,
(1', PO_Only
PACKING PARTS
(11 PI[MC, OSFHP122C02
EF_
(1', Pl[Other OSFHP122M02
areas]
(1'_ I11 ®SFHP124SO2
(1',
P2
(51 P3
Description
Washer
Screw
Washer
Screw
Screw
CIrclip
Screw
Screw
Washer
Screw
Washer
Screw
Washer
Washer
Washer
Screw
HeadshelI
SFPWG17201K
SFPRT18201K
SFPZB17202
SFQA829-03
SFPAB13202
SFPJL18202K
SFPZB12203
SFUM170-06
SFPZB12204
SFPAB18201K
SFPZB12201K
SFDH 122-05
SFEL028-01 E
SFPRT17201K
62 0SFPAM18201K
62 _) SEPAM18202K
63
64
65
66
67
68
70
71
72
73
74
75
76
77
78 G SFPKD17203
T8 ®SFPKD17205
79 SFPKB17204E
80 SFPKD12201
81 SFPAB17206
82 0SFGK132-01 Cap (Silver)
82 (_ SFGK133S01 Cap (Black)
SCREW,NUT AND WASHERS
N1 _) XTN3-{-8BFZ Screw
Tonearm Ass'y (Silver)
Tonearm Ass'y (Black)
Balance Weight
Lift Ass'y
Knob, Arm Base Lock
Spring, Lift Ass'y
Knob, Am Lift
Oil Damper
Plate, Arm Base Cover
Spacer, Phono Cord
Clamper, Phono Cord
Tonearm Fixing Plate
Plate
Phono Cord
Ground Wire
Arm Rest
Arm Base (Silver)
Arm Base (Black)
Ring,Arm Base Operation
Bracket, Arm Base
Knob, Anti-Skating
Instructioc Book
Instructloc Book
Instruction Book
Instruction Book
Instruction Book
Instruction Book
(6)
(4)
(4)
(1)
(2)
(1]
(3)
(1)
(r,
(4}
(1',
(2',
(2;
(1',
(4:
(1',
N2 SFXGQ20-02
N3 _) XTN3+SB
N4 L_ XWG3
N5 (_ XTN26-F6B
N6 _XTV3+8BFN
N7 SFXG172-01
N8 XTN3+5J
N9 SFXW172-03
N10 SFPEWl 1003
Nll _XWE3E10
N12 _ XWA3B
N13 _ XSN3+10S
N14 SFXW910J02
N15 _XTN3+10B
N16 _XTN2+10B
N17 _XUC3FT
N18 XSN17+3FY
N19 (_ XUC2FT
N20 L_ XUC25FT
N21 _ XSN3+14S
N22 RT'_N-12
N23 _XSN 2-'}-10
N24 _) XSN3-}-6S
N25 _XTN3+6B
N26 XTWS3-1-14TFZ
N27 SFXG122-02
N29 SFXG122-01
N30 XTN3+14QFZ
Screw
Screw
Washer
Screw
Screw
Screw
Screw
Washer
Washer
Washer
Washer
Screw
Washer
Screw
Screw
Circlip
Screw
Circlip
Cirolip
Screw
Cimlip
Screw
Screw
Screw
Screw
Screw
Screw
Screw
(31 P4
(8_ P5
(E P6
(3_ P7
(8',
(3) P8
(21
/t; P9
(6} P10
(3)
(8_ P11
I3i iP12
(1_ P13
(11
(11
(1)
(sl
(4)
SFHH122-01
SFHH122-02
SFHD122N05
SFHD122-02
SFHD122N08
SFYHBOX60
SFYH40X45
SPB1083
SPJ15
SFHZD03M01
SFHZ122-01
SPP189
(11
(1',
(!1
(1',
(i;
45 Adaptor ()
Nut,Cartridge (2)
Washer,Cartridge (21
Screw,Caitfidge (2)
Screw,Cartridge (2}
Overhang Gauge (1
Shell Weight (1)
2pin Plug (I)
Sub-weight (1)
Adaptor, Gtmens
Carton Box (Silver) (1)
Carton Box (Silver) (1)
Canon Box (Black) (1]
Pad, Front (1)
Pad, Rear (1)
Pad, Top (1)
Pad (A), Turntable (1)
Pad (B), Turntable (1)
Polyethylene Bag, (2)
Unit& Dust Cover
Polyethylene Bag, (1)
Turntable
Polyethylene Bag, (3)
Accessories
Polyethylene Bag, (1)
Shell Weight
Cover Sheet, Dust Cover (1)
Cover Sheet, 45Adaptor (1)
Cover Sheet, Cords (2)
--12--

EXPLODED VIEWS
• Cabinet and ChassisParts
Note: For the set with serial number sheet change mark [] ,the
power transformer is fitted as shown below.
®
®
®
®
I
@
@
I
@
\
®
\
--13_ 14

• Tonearm Parts
@
@
15

•CIRCUIT BOARD AND WIRING CONNECTION DIAGRAM
O[VR301 ',
Pitch control
±0% adj,
$401
Stylus illuminator
switch
R401
• _ P_L:YLUS ' L L-uM_
I PITCH ADJ.!
Pitch control
gain adj._
Brake adj.
ISTART-STOPI SPEED
(33)
m
SELECTOR ] "
(45)
Brown
S60t
Productfor U.S.A.
ACI20V
50/60Hz
Red
TI
Power
transformer Red
C
To Drive circuit
board G
• Power source i
* Product for !
@
(_,. clue
TO Drive
circuit board /_ BI.I
* Product for [E
[EF], [Ei], [X
16 --17--

STYLUS iLLUMINATOR_
_PLI
TI
Power
transformer
S601
ProductforU.S.A.
ACI2OV
50/6OHz
Re_
To Drive circuit
board @-
•Power source circuit
* Product for Canada
S601 ACI20V
{5 0/60 Hz )
(_
To Drive
circuit board (_
* Product for [E], [EK], [XL], [EG], [EB], [EH]
[EF], [Ei], [XA], [PA], [PE] and [PC] areas
$601
AC 110-120V /
220-240V
-- {50/60Hz )
•_k $601 POWER
/k.TI
z_ $601 POWER
ACII0-120/220 -24OV
(5016OHz) /k
--17-- 18

I 3 I 4 I 5 I 6 I 7 I 8 I 9 10I
A
B
D
1 I 2
• SCHEMATIC DIAGRAM
(This schematic diagram may be modified at any
time with the development of new technology.)
Notes:
1. $201,202
2, $203
3. $301
4. $401
5. $601
6. 8602
: Speed selector switch.
:Start/stop switch.
: Pitch control reset switch in "off" position.
: Stylus illuminator switch in "off" position.
: Power switch in "on" position.
: Voltage selector in "220 -- 240" position.
7. The voltage value, and waveforms are the reference voltage values of this unit
measured by DC electronic voltmeter (high.impedance) and oscilloscope on
the basis of chassis. Therefore, the voltage value and waveform may include
some error due to the internal impedance of the tester or the measuring set.
* _ is the voltage when turntable is in stop.
*( ) is the voltage when turntable is in rotation. (at 33 rpm)
8. +B voltage lines.
9. Important safety notice.
Components identified by ,_ mark have special characteristics important for
safety. When replacing any of these components, use only manufacturer's
specified parts.
10. The part No. of diodes mentioned in the schematic diagram stand for produc-
tion part No, Regarding the part No. with Omark the production part No.
are different from the replacement part No. Therefore, when placing an order
for replacement part, please use the part No, in the replacement parts list.
• Terminal guide of transistors, diodes and IC°s
AN6675
13
24 _-'"
1"
[ ,MN4011B t14 Pi. I
2SC 1328
svDPR39o2s-9
SVDSLH54VT3
AN6680
13
2A_2
l
2SC 1846
B
SVDGL-9PG2
K
AN6682
2SD1265
2SD637 2SB641
2SD636 2SB643
SVDS1RSA20F
21 7
I4
MA150
M"A1051
mork
POWER SOURCE CIRCUIT
A
POWER SSOI
A
AC 120V
( 50/60Hz
Product for U,S.A.
C601 R60I
0047 47
(O.SW)
D301
MA1051M
5.IV ZENE
-OFP,OV
S. 6V IC302
MN4OIIB
PITCH CONTROL
ON/OFF SELECT
• S3OI-ON, OV
e S3OI---OFF5.6V VR303Centel
IS3OI_._ON O,28ms
16301
r+-m
RT2 CT2 FRC GND FO CTI RTI FI
,3--(
VR303 Center
3.eps 1C30 I
AN6682
ssv PITCH CONTROl
Pitch control 1"O% adjustment
*STOP
33rpm--2Om$
45 rprr.--L5 ras
*ROTATION
Broke
• ROTATION
q l m
m
Iv i I
33rpm-+2Oms
45tpm--t5 ms
¢2t0
0.22
v0
I I
040 I
SVDGL-9NG2
PITCH I NOICATOR
PITCH CONTROL
VR303 20KB
S3Ol
Reset
L_OK8
Pitch control gain adjustment s_ 33
D2OI,202
SVDPR3902S'9
SPEED INDICATOR
I
Q2,3
2SD637
REGULATOR
DI
_SVDSIRBA20F
RECTI FI ER
STOP
R204
2.?K
C204
Pe FAO FAI ECR RS.S T az FG_ FGO r6I
=c2ol AN6680 CONTROL
r¢2t?
0202
S60€1_)
IOK
0201
2SCl846
REGULATOR
4, I93MHz
O202
2SD637
LED DRIVER
I D203 D205
LD204 D206
45 D203 _ 206
SVDSLH 54VT3
STROBE
(
/!
ST
IL
G--19-- --20--

5 I 6 I 7 I 8 I 9 I 10 I 11 I 12 I 13_ I 14 I
&8us
/
VR303 Canter
3.Sps
3.8v
0
503 Center, 3.8p
303 -°/o, 4Jps
303 ÷°/o, 3.6ps
02,3
2SD637
REGULATOR
QI
2SDI265
REGULATOR
POWER SOURCE CIRCUIT
POWER $601 Ol
OSVDSIRBA20F
RECT IFI ER
C 60 I
L_ 0.047
AC 120V u
(50/GOHz
Product for U.S.A. I
)
)8 _8
IO ,,n
S/S 33 45
D201,202
SVDPR3902S-9
SPEED INDICATOR
VR30 ! 20KB
Pitch control gain adjustment D203 _ 206
SVDSLH54VT3
STROBE
"t
D2
MAIOSIIM
5.IV ZENER 1
-1I
v l q, O8 25v_00 ,
0 l "* ClIO
,,_og: Ii o.,
--. IRIO8 IOK
CI PI GNO PC YCC O$
50kHz
CS PC ATC AI
Ic_ol AN6675 TURNTABLEDRIVE
ECR EC AC
)-.
_(5_
()
7_
CNIOI
STYLUS
ILLUMINATORL ---S_40 LJ
Stylus illuminator
switch
RiOt
1OK A3
A2
A
-- 20 _ 21

BLOCK DIAGRAM
9V 9V
+_ FG Coil
TURNTABLE DRIVE/CONTROL CIRCUIT
IC201
AN6680
Reference sigr_l generation
FG amplifier, speed and phase
contrOl
Position
detection
50kHz
IClOl
AN6675
45rpm, 15ms
X201
IC201
Strobe drive
Q202 _
I0.9
33rpm , I0 ms
45rpm , 7.3ms
Strobe
20V
Start/
Stop
S203
Speed se lector
(45) (33)
S202 SZOI
20V
Brake adj.
VR201
Speed
control
Phase
control
1
III
Turntable drive
Three-phase
full wave PNP
Three-phase
full wave NPN
Power TR
Power TR
Regulator
20V
Pilch control
_tO% adj.
VR301
Pitch control
gain adj.
VR302
Stabi lizer
Frequency
Phase
comparator
I
P,,chooo,,o,I I
VR303
"PITCH CONTROL CIRCUIT
IC301
AN6682
Pitch control Pitch 0% 262,08kHz
20V
I
$301 "]
Reset I
[
I
• 0 I
VR303 Center 3.8/us I
[
I
i
I
Drive col I
AI
A2
A3
|C302
MN4OIIB
Pitch contro I
on/off select
-- 22 -- -- 23 --

PACKING
A9 P3
P12
A2
\
P7
P2
P7
P1
t eadsheel
A3, A4, A5
A6, A8, P9
A10
P10
Counter
weight
P9
1. Plase the unit (with cushions attached) as
illustrated.
2. Fold the flaps according to the line marks.
3. Seal the top with adhesive tape.
* Use gum tape or adhesive cloth tape of
50ram wide at least
4. For the edges, first fold the flap "a '° and then
flap "b", and staple. Remember to staple
only flap "b". (Use 15 or 16mm staple)
Staple
* Stapling positions are shown below.
5_15mm
20ram
20mm
50mm
50ram
-- 24 m
Printed in Japan
H840412450TK
K920401750