TechniSat DIGITRADIO 220 User manual

2
Important Safety Instructions
1. Read these instructions.
2. Keep these Instructions.
3. Heed all Warnings.
4. Follow all instructions.
5. Do not use the speaker near water.
6. Clean only with dry cloth.
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE
THIS SPEAKER TO RAIN OR MOISTURE.
To reduce the risk of electrical shock, fire, etc.:
1. Do not place unit near any heat source such as radiators, heat registers, stoves, or other
apparatus (including amplifiers) that produce heat.
2. Do not block any ventilation openings of unit.
3. The unit shall not be exposed to dripping or splashing and no objects filled with liquids,
such as vases, shall be placed on the unit.
4. Do not place any heavy loads onto the unit, and do not step on it, the load may fall and
cause serious injury to the unit.
5. Please read Rating Labels at the back of unit for power input and other safety
information.
6. This unit is intended to be used only with the power supply provided.
7. Protect the power cord from being walked on or pinched particularly at the plugs,
convenience receptacles, and at any point where they exit from the unit.
8. Never unplug your unit by pulling on the power cord. Always grasp the plug firmly and
pull straight out from the outlet.
9. Repair or replace all electric service cords that have become frayed or otherwise
damaged immediately. Do not use a cord that shows cracks or abrasion damage along
its length, the plug, or the connector end.
10. To prevent fire or shock hazard, do not use this plug with an extension cord or other
outlet unless the blades can be fully inserted to prevent blade exposure.
11. To prevent fire or shock hazard, do not expose unit to rain or moisture.
12. During lightning or raining days, unplug the unit for additional protection during
thunderstorms or when the unit is not used for prolonged periods. This will prevent
damage to the unit from lightning and power surges.
13. Do not attempt to carry out any service work yourself. By opening or removing the
cabinet, you may be exposed to dangerous voltage or other hazards. Any service work
should be carried out by qualified technicians.
14. The normal function of the product may be disturbed by strong Electro-Magnetic
Interference. If so, simply reset the product to resume normal operation by following the

3
instruction manual. In case the function could not resume, please use the product in
other location.
15. The means of disconnecting this apparatus from the mains supply is plug of adapter. The
disconnect device shall remain readily operable.
16. In the interests of safety and to avoid unnecessary energy consumption, never leave the
unit switched on while unattended for long periods of time, e.g. overnight, while on
holiday or while out of the house. Switch it off and disconnect the mains plug from the
mains socket.
17. Danger of explosion if battery is incorrectly replaced. Replace only with the type which
produced by the manufacturer.
18. The battery is only intended for use with the power supply provided with the product.
19. Do not attempt to charge the battery in temperatures outside the range of 0℃~40℃.
20. Keep battery out of the reach of children and pets.
21. If the battery begins to leak, do not allow the liquid to come in contact with your skin or
eyes. If contact has been made, wash the affected area with plenty of water and seek
medical advice immediately.
22. Do not expose the product or battery to excessive heat, including direct sunlight or fire
and storage or use inside cars in hot weather, where it can be exposed to temperatures
in excess of 60℃. Doing so may cause the battery and power supply to generate heat,
rupture, or ignite. Using the product in this manner also may result in a loss of
performance and a shortened life expectancy.
23. If the battery is damaged and ignites, do not use water to extinguish flame. Instead, use
a functioning fire extinguisher.
24. Do not step on, throw, or drop battery or the power supply or expose them to a strong
shock. Do not pierce, crush, dent, or deform the batteries or power supply in any way. If
either becomes deformed, properly dispose of it.
25. Do not shout-circuit battery. Avoid storing them around metal objects such as keys,
pocket change, paper clips and jewelry.
26. Do not dismantle, open or shred the battery.
27. Do not attempt to use the battery to power other electronics. Doing so may result in
permanent damage to your system and/or personal injury.
28. Please dispose of a used or damaged battery promptly and properly, following all local
regulations. Do not incinerate.

4
Contents
Important Safety Instructions .................................................................................................... 2!
Contents.................................................................................................................................... 4!
Getting Started.......................................................................................................................... 5!
Unit Front View ..................................................................................................................... 6!
Unit Back View...................................................................................................................... 7!
DAB Mode................................................................................................................................. 8!
Full Scan............................................................................................................................... 8!
Selecting another Station...................................................................................................... 8!
Secondary Service................................................................................................................ 8!
Viewing Station Information.................................................................................................. 9!
Storing Preset Stations ......................................................................................................... 9!
Recalling Preset Stations...................................................................................................... 9!
FM Mode................................................................................................................................. 10!
Selecting FM Mode............................................................................................................. 10!
Scan Setting ....................................................................................................................... 10!
Audio Setting ...................................................................................................................... 10!
Viewing Station Information................................................................................................ 10!
Storing Preset Stations ....................................................................................................... 11!
Recalling Preset Stations.................................................................................................... 11!
Aux in Mode ............................................................................................................................ 12!
General Operations................................................................................................................. 13!
Setting Sleep ...................................................................................................................... 13!
Setting Alarm ...................................................................................................................... 13!
Setting Equaliser................................................................................................................. 15!
Setting Time........................................................................................................................ 15!
Setting Backlight ................................................................................................................. 15!
Setting Language................................................................................................................ 16!
Factory Reset ..................................................................................................................... 16!
SW Version......................................................................................................................... 16!
Specification............................................................................................................................ 17!

5
Getting Started
Carefully remove your radio from the box. You may wish to store the packaging for future use.
What you can find inside of your package
!Main unit
!Instruction manual
!Power adapter
Positioning your Radio
Place your radio on a flat / stable surface that is not subject to vibrations.
Avoid the following locations:
!Where the radio will be exposed to direct sunlight.
!Where the radio will be close to heat radiating sources.
!Where the humidity is high and ventilation is poor.
!Where it is dusty.
!Where it is damp or there is a possibility of water dripping or splashing onto unit.
Adjusting the Antenna
Extend the antenna to ensure you receive the best reception possible in both DAB/DAB+ and
FM radio modes. It may be necessary to adjust the position of the radio and /or antenna to
achieve the best signal.
Using Headphones
You will require headphones fitted with a 3.5 mm diameter stereo plug. The Headphones
socket is located on the back of this unit. Headphones are not supplied with this radio.
Turn down the volume before connecting headphones. Slowly raise the volume with the
headphones on until you reach your desired level.
"Note: long-term exposure to loud music may cause hearing damage. It is best to avoid
extreme volume when using headphones, especially for extended periods of time.
Turning the Unit On/Off
1. Connect the plug at the end of power adapter cable to the DC IN socket on the back of
the unit. Then insert the power adapter into the mains socket.
2. Switch the POWER ON/POWER OFF switch to POWER ON position, and then press
VOLUME/ knob to turn the unit on or standby.
3. To turn off unit completely, switch the POWER ON/POWER OFF switch to POWER OFF
position.
Your radio includes a built-in battery, once connected radio to mains supply, the battery will
be automatically charged and automatically stop charging since fully charged. Charge the
battery for 12 hours before first time use.
When radio doesn’t connect to mains supply, it will run by battery power and indicator will
show on the display. Press VOLUME/ knob to turn the unit on or standby.
Volume Control
Adjust the radio volume by turning VOLUME/ knob clockwise or anticlockwise to increase
or decrease volume level.

6
Unit Front View
1. INFO button
Press to browse station information.
2. MODE button
Press to switch among DAB, FM,
Bluetooth and Aux in modes.
3. VOLUME/knob
#Press to switch radio on or standby.
#Turn to adjust volume level.
4. MENU button
Press to display or exit menu.
5. PRESET buttons 1, 2and 3
#Simply press and hold one of
PRESET buttons 1, 2and 3to save
preset station 1, 2 or 3.
#Simply press one of PRESET buttons
1, 2and 3to recall preset station 1, 2
or 3.
6. SCROLL&SELECT/SNOOZE knob
#Turn to browse options.
#Press to confirm selection.
#Press to activate snooze function
when alarm sounds.
7. PRESET button 4+
#Press and hold PRESET button 4+ to
save a preset station among 1-10.
#Press one of PRESET button 4+ to
recall a saved preset station among
1-10.
8. Display
9. Handle
10. Speaker

7
Unit Back View
1. UPDATE PORT
Please leave this for service professional!
2. Headphones socket
3. AUX IN socket
4. DC IN socket
12V/1000mA
5. POWER ON/POWER OFF switch
Switch unit between POWER ON and POWER OFF.
6. DAB/FM antenna
7. Handle

8
DAB Mode
When you turn on the radio it will automatically search and store all the available stations.
You should conduct an additional Full Scan to ensure all stations are picked up and stored. It
is also recommended every few months to run a new scan to pick up any new DAB/DAB+
that may have begun broadcasting after purchasing your DAB radio.
1. For initial use, your radio will conduct a full scan and store stations list in memory.
2. Once the scanning is completed, the DAB/DAB+ stations will be displayed in
alphanumeric order. The first station in the list will be selected.
"Note: a. The DAB/DAB+ stations will be displayed and stored in alphanumeric order.
b. If no DAB/DAB+ signal is found, it may be necessary for you to relocate
your radio.
Full Scan
This feature enables your radio to scan for all available stations.
Press MENU button, and then turn SCROLL&SELECT/SNOOZE knob to select Full scan,
press SCROLL&SELECT/SNOOZE knob to confirm.
Selecting another Station
1. Press MENU button, and then turn SCROLL&SELECT/SNOOZE knob to select Auto
select, press SCROLL&SELECT/SNOOZE knob to confirm.
2. Turn SCROLL&SELECT/SNOOZE knob to select Enable, and then press
SCROLL&SELECT/SNOOZE knob to confirm.
3. While a program is playing, turn SCROLL&SELECT/SNOOZE knob to show station list.
4. Turn SCROLL/SELECT knob to browse through stations list, the station you want to play
will be automatically broadcast.
5. Alternatively, once Auto select is set Disable, turn SCROLL&SELECT/SNOOZE knob
to browse through stations list, and then press SCROLL&SELECT/SNOOZE knob to
confirm broadcasting.
Secondary Service
You may see a “>>” symbol after the name of the station, this indicates that there are
secondary services available to that station. These secondary services contain extra services
that are related to the primary station. E.g. a sports station may want to add extra
commentaries. The secondary services are inserted directly after the primary station (a “<<”
symbol is before the name of the station) in the station list.

9
To select the secondary station, turn SCROLL&SELECT/SNOOZE knob until you find the
secondary service you want, then press SCROLL&SELECT/SNOOZE knob to select it.
When the secondary service ends, the unit will automatically switch back to the primary
station.
Viewing Station Information
DAB/DAB+ stations broadcast additional information. Press INFO button repeatedly to view
information through Scrolling text, Signal strength, Program Type, Ensemble, Frequency,
Signal quality, Bitrate and Codec, Format, Time and Date, and then press
SCROLL&SELECT/SNOOZE knob to confirm your selection.
Showing Signal Strength
While you selected Signal strength, a signal bar with the strength of the current station will
show on the display.
The indicator on the signal bar shows the
minimum acceptable signal level.
"Note: Stations with signal strength below the
minimum signal level may not provide a
steady stream of audio.
Storing Preset Stations
Your radio can store up to 10 of your favourite DAB/DAB+ stations as preset stations.This
will enable you to access your favourite stations quickly and easily.
1. While a station is playing, press and hold PRESET button 4+ until display shows ‘Preset
Store <1: (Empty)>’.
2. Turn SCROLL&SELECT/SNOOZE knob to select among preset numbers 1-10.
3. Press SCROLL&SELECT/SNOOZE knob to confirm, the display shows ‘Preset #
stored’.
4. Alternatively, while a station is playing, you can simply press and hold one of PRESET
buttons 1, 2and 3to save preset station 1, 2 or 3.
Recalling Preset Stations
1. Press PRESET button 4+ to show stored preset stations.
2. Turn SCROLL&SELECT/SNOOZE knob to select through stored preset station list, and
then press SCROLL&SELECT/SNOOZE knob to confirm the station which you want to
play.
3. Alternatively, simply press one of PRESET buttons 1, 2and 3to recall preset station 1, 2
or 3.

10
FM Mode
Selecting FM Mode
1. Press MODE button repeatedly to select FM mode.
2. For initial use, it will start at the beginning of the FM frequency range (87.50MHz).
Otherwise, the last listened FM station will be selected.
3. To manually change the FM frequency, making sure no other order/system setting is
going on, turn SCROLL&SELECT/SNOOZE knob to change the frequency by 0.05MHz
per step.
4. To automatically scan, while FM frequency shows up, turn
SCROLL&SELECT/SNOOZE knob clockwise or anticlockwise, and then press
SCROLL&SELECT/SNOOZE knob, your radio will skip forwards or backwards until it
reached the next available station.
Scan Setting
By default, FM scans stop at any available station. This may result in a poor signal-to-noise
ratio (hiss) from weak stations.
1. To change the scan settings to stop only at stations with good signal strength, press
MENU button, and then turn SCROLL&SELECT/SNOOZE knob to select Scan setting,
press SCROLL&SELECT/SNOOZE button to confirm.
2. Turn SCROLL&SELECT/SNOOZE knob to browse ‘Strong stations only’, and then press
SCROLL&SELECT/SNOOZE knob to confirm.
Audio Setting
By default, all stereo stations are reproduced in stereo. For weak stations, this may result in a
poor signal-to-noise ratio (hiss).
1. To play weak stations in mono, press MENU button, and then turn
SCROLL&SELECT/SNOOZE knob to select Audio setting, press
SCROLL&SELECT/SNOOZE knob to confirm.
2. Turn SCROLL&SELECT/SNOOZE knob to browse ‘Forced mono’, and then press
SCROLL&SELECT/SNOOZE knob to confirm.
Viewing Station Information
FM stations broadcast additional information. Press VOLUME / INFO knob repeatedly to view
information through Radio text, Program Type, Program name, Audio info, Time and Date.

11
Storing Preset Stations
Your radio can store up to 10 of your favourite FM stations as preset stations.This will enable
you to access your favourite stations quickly and easily.
1. While a station is playing, press and hold PRESET button 4+ until display shows ‘Preset
Store <1: (Empty)>’.
2. Turn SCROLL&SELECT/SNOOZE knob to select among preset numbers 1-10.
3. Press SCROLL&SELECT/SNOOZE knob to confirm, the display shows ‘Preset #
stored’.
4. Alternatively, while a station is playing, you can simply press and hold one of PRESET
buttons 1, 2and 3to save preset station 1, 2 or 3.
Recalling Preset Stations
1. Press PRESET button 4+ to show stored preset stations.
2. Turn SCROLL&SELECT/SNOOZE knob to select through stored preset station list, and
then press SCROLL&SELECT/SNOOZE knob to confirm the station which you want to
play.
3. Alternatively, simply press one of PRESET buttons 1, 2and 3to recall preset station 1, 2
or 3.

12
Aux in Mode
Aux in allows for quick and easy connection to an MP3 player or other external audio
sources.
1. Before connecting to the mains socket, use a 3.5mm audio cable (not supplied) to
connect to your external audio device through the AUX IN socket on the rear of unit.
2. Connect power adapter to mains socket, press VOLUME/ knob to switch unit on.
3. Press MODE button repeatedly to select Auxiliary Input mode.
4. In Aux in mode, you may operate your audio device directly for playback features.
5. To gain optimal volume levels, adjusting the output volume level on the audio device as
well is recommended.
"Note: the unit will automatically switch to standby mode after 10 minutes if the source
device is disconnect, switch off or the volume is too close to mute.

13
General Operations
Setting Sleep
This feature enables your radio to switch to standby mode by itself after a set sleep time.
1. Press MENU button, turn SCROLL&SELECT/SNOOZE knob to select Sleep, and then
press SCROLL&SELECT/SNOOZE knob to confirm.
2. Turn SCROLL&SELECT/SNOOZE knob to view options Sleep off, 15, 30, 45,60 or 90
minutes, press SCROLL&SELECT/SNOOZE knob to confirm. The sleep icon will
show on the display.
3. To view the set sleep time, redo above step 1.
4. To turn the sleep function off while the sleep timer is still counting down, select 'Sleep'
option, turn SCROLL&SELECT/SNOOZE knob to select 'Sleep off'.
Setting Alarm
Your radio includes dual alarms. Set Alarm, making sure that set time at first.
1. Press MENU button, turn SCROLL&SELECT/SNOOZE knob to select 'Alarm', press
SCROLL&SELECT/SNOOZE knob to confirm.
2. Turn SCROLL&SELECT/SNOOZE knob to browse 'Alarm 1' and 'Alarm 2', press
SCROLL&SELECT/SNOOZE knob to confirm. or will flash on the display.
3. Follow your radio’s instructions to configure the following parameters:
Alarm states:
On or Off
Alarm time:
On Time: 00:00 (manually set up the time )
Alarm duration time:
15/30/45/60/90 minutes
Alarm source:
DAB, FM or Buzzer
Last listened:
Only available when DAB or FM source is selected
Alarm active day:
Daily, Once, Weekends or Weekdays
Alarm volume:
turn VOLUME/ knob to set the alarm volume
4. When display shows 'Alarm Saved', the alarm setting is successful.
5. To temporarily switch off alarm, press SCROLL&SELECT/SNOOZE knob to activate
Snooze function when the alarm sounds and set Snooze time cycle through 5, 10, 15 or
30 minutes.
"Note: the options of Snooze time depends on which alarm duration time you
selected.
Alarm duration time
Snooze time
15 minutes
5 or 10 minutes
30 minutes
5, 10 or 15 minutes
45/60/90 minutes
5, 10, 15 or 30 minutes
6. To turn off alarm, press VOLUME/ knob when the alarm sounds.

14
7. To cancel Alarm, refer to steps1-3 to set Alarm states to ‘Off'.

15
Setting Equaliser
This feature enables you to set a sound equalization profile. The equalization setting will
change the tone of the sound from your radio.
1. Press MENU button, turn SCROLL&SELECT/SNOOZE knob to select Equaliser, and
then press SCROLL&SELECT/SNOOZE knob to confirm.
2. Turn SCROLL&SELECT/SNOOZE knob to browse through Treble and Bass, and then
press SCROLL&SELECT/SNOOZE knob to confirm.
3. Turn SCROLL&SELECT/SNOOZE knob to set the level of Treble and Bass s among ‘-5’
to ‘+5’, and then press SCROLL&SELECT/SNOOZE knob to confirm.
Setting Time
1. Press MENU button, turn SCROLL&SELECT/SNOOZE knob to select Time, and then
press SCROLL&SELECT/SNOOZE knob to view options as below:
Set Time/date:
Manually set-up both Time and Date
Auto update:
‘Update from Any’, ‘Update from DAB’, ‘Update
from FM’ or ‘No update’
Set 12/24 hour format:
‘Set 24 hour’ or ‘Set 12 hour’
Set date format:
‘DD-MM-YYYY’ or ‘MM-DD-YYYY'
2. Then setting time according to your personal preference.
Setting Backlight
1. Press MENU button, turn SCROLL&SELECT/SNOOZE knob to select Backlight, press
SCROLL&SELECT/SNOOZE knob to confirm.
2. Turn SCROLL&SELECT/SNOOZE knob to select ‘Power on' or 'Standby', then press
SCROLL&SELECT/SNOOZE knob to confirm.
3. Turn SCROLL&SELECT/SNOOZE knob to select backlight level, and then press
SCROLL&SELECT/SNOOZE knob to confirm the setting.
Power on
#High
#Medium
#Low
Standby
#High
#Low
#Off

16
Setting Language
This feature enables you to change the menu language. The default language is German.
1. Press MENU button, turn SCROLL&SELECT/SNOOZE knob to select Language, and
then press SCROLL&SELECT/SNOOZE knob to confirm.
2. Turn SCROLL&SELECT/SNOOZE knob to browse, and then press
SCROLL&SELECT/SNOOZE knob to select you desired language.
Factory Reset
Doing a factory reset resets all user settings to default values, so time/date and presets are
lost.
1. Press MENU button, turn SCROLL&SELECT/SNOOZE knob to select Factory Reset,
and then press SCROLL&SELECT/SNOOZE knob to confirm.
2. Turn SCROLL&SELECT/SNOOZE knob to select 'Yes', and then press
SCROLL&SELECT/SNOOZE knob to confirm.
SW Version
Press MENU button, and then turn SCROLL&SELECT/SNOOZE knob to select SW version,
press SCROLL&SELECT/SNOOZE knob to confirm. The software version will show on the
display.

17
Specification
ITEMS
SPECIFICATIONS
Description:
DAB/DAB+ and FM Digital Radio
Frequency Ranges:
FM: 87.5-108MHz
DAB/DAB+: 174.928 – 239.200MHz
Power Supply:
AC Input: 100-240V, 50-60Hz
DC Output: 12V/1000mA
Battery Requirement:
Rechargeable Li-ion Polymer Battery
Audio Output Power:
5W rms
Power Consumption:
12W (Max)
Dimension (Wx D x H):
250mm x 86mm x 153mm
This symbol on the product or in the instructions means
that your electrical and electronic equipment should be
disposed at the end of its life separately from your
household waste. There are separate collection systems
for recycling in the EU.
For more information, please contact the local authority or your retailer where you purchased
the product.