Tecno T473 User manual

1
Mobile Explode picture
Item
Descripition
Item
Descripition
1
LCD Lens
2
Front Housing
3
LCD
4
Front Camera
5
PCBA
6
SPK

2
7
CAM Frame
8
Rear Housing
9
CAM Lens
10
Screw
11
Battery Cover
12
Battery Label
13
Back CAM
14
Mot coin
15
Fraglle Label
16
IMEI Label
17
Water-proof Label
18
Done
19
Main key
20
Label

3
Foreword
Valuable mobile phone user, thank you for choosing our
mobile phone!
Our mobile phones reply to the People's Republic of
China communication industry standards and the
European standards and are approved for GSM networks.
Your phone may be used internationally with various
networks depending on your roaming arrangements with
your service provider.
To use this phone you must subscribe to a GSM service
from a provider. We have included many features in this
device but their function depends on the features
available on your subscribed wireless network. Please
contact your service provider for more information.
We strongly recommend you to carefully read and
understand this manual before using your phone in order
to keep it under best conditions for your effective usage
and utmost satisfaction.

4
1. Quick start
Install SIM card
This phone supports two GSM SIM cards. Find SIM card’s
groove in the back of the phone and slide it completely
there. During installation, please make sure insert the SIM
card into slot completely and pay attention to slot
direction.
Installing T-flash card
1. First switch off the phone and remove the battery.
2. Place the memory card into the SD card slot with the
metal contacts facing down.
Installing Battery
Align the battery chip with the metallic salient point in
battery jar; insert the battery until it is inserted into the
battery jar. Install the back cover into the back of the
phone until it is locked.
Battery Charging
Check the model number of any charger before use with
the device. Connect the charger to a wall outlet, and
connect the plug from the charger into the USB port on the
bottom of your phone. If we charge it with electricity, the
phone’s battery icon will move. After charging is finished,
just pull out the plug.
Switching on/off
Long press the power on/off key to switch on or off.

5
2. Call function
Dialing
1. Direct dial
In standby mode, press the corresponding numeric keys
to enter the phone number that you want to dial, including
necessary area codes. Short press the right soft key to
delete one character, and long press to delete all inputs, if
only one SIM card is inserted, press the dial/receive key to
dial, if two SIM cards are inserted, the phone displays
select SIM card page, if you select SIM1 then use SIM1 to
dial, you select SIM2, then use SIM2 to dial.
2. Making an international call
To make an international call, long press 0 key until the
prefix symbol "＋" of international call displays in screen.
3. Dialing from Contacts
Enter the contacts via the menu, use the up/down
navigator keys to scroll to the desired contact, or press the
first letter of the name of the desired contact as saved in
your contacts for quick access to names beginning with
the letter then scroll to the desired, press the dial/receive
key to dial.
4. Dialing from call history
Enter the call center (press the dial/receive key from
standby or via the menu), use the up/down navigator keys
to scroll to the desired contact, press the dial/receive key
to dial.
5. Dial emergency service
You can directly dial the emergency service number
without SIM card. Different networks use different
emergency service numbers, so for details please inquire