Teeter Better Back Comfort Cushion Owner's manual

Made in China. Specifications subject to change without notice.
© COPYRIGHT 2017; International law prohibits any copying. EP1440 0317-1
Your inversion table may differ from
image shown. Assembly and use of the
Comfort Cushion remains the same.
CHOKING HAZARD: Small parts - keep out of reach of children.
Assembly & User Instructions
WARNING
!
Better Back™Comfort Cushion
• Simply lean back and enjoy the added cushion and support while inverting
on your Teeter.
• The open slots in the cushion accommodate the Lumbar Bridge accessory
included with select Teeter Inversion Tables** (shown right).
• The smooth surface provides minimal friction to still allow body slide for
effective decompression.
How to Assemble
How to Use
Figure 1
Figure 3a
EN
Figure 3b
Compatible with the majority of Teeter Inversion Tables*, the Better Back™ Comfort Cushion provides a plush,
supportive surface for a premium inversion experience without decreasing body slide needed for decompression.
The included fastening nodes firmly secure the Comfort Cushion to the Table Bed, so you can continue your usual
inversion routine without worrying about it slipping out of place.
Cleaning & Maintenance
• Spot clean using a soft, slightly damp sponge or cloth. Do not use brushes or
abrasive cleaners.
* Comfort Cushion is not compatible with the FitFlex Bed featured on 700ia & 900ia Teeter Inversion Tables.
** Lumbar Bridge is compatible with the EP-560, EP-560 Ltd., EP-860 Ltd., EP-960 Ltd., EP-970 Ltd., & NXT-S
Teeter Inversion Tables.
Figure 2
• Locate the fastening nodes included with the Comfort Cushion and unscrew the
black backing from each.
. Place the cushion onto the Table Bed lining up with the designated holes
(Figure 1).
• Insert a node backing from the back of the Table Bed through the Table Bed
slot and hole in the cushion. Turn the backing perpendicular to
the slot (Figure 2).
• With the other hand, fasten the node top onto the backing threads visible from
the front of the Table Bed. Twist the node clockwise to secure it into place
(Figure 3a & 3b). Secure the node just tight enough to keep it in place but do not
overtighten to avoid damaging the node.
• Repeat the process above with the three (3) remaining fastening nodes to finish
securing the Comfort Cushion to the Table Bed.
• If/when the Comfort Cushion is removed, be sure to replace the backings onto
the nodes.

P2™Back Stretcher
Apply gentle, user-controlled
traction to allow the lower back
to decompress, reduce nerve
pressure, and relax tense muscles.
reNEW™Muscles Pain
Relieving Cream
Deeply penetrates sore and aching
muscles on contact. Specially
formulated with emu oil, arnica,
MSM, and glucosamine.
Better Back™Foam Roller
Durable, extra firm high-density
foam with versatile design for
posture, balance, self-massage,
and core exercises.
Better Back™Neck Restore
Provides support of the upper
neck/cervical spine for
self-administered suboccipital
release, a technique to reduce tension
in the supporting muscles.
Find These Great Products and More at teeter.com!
T3™Massager
Countless options for self-massage,
trigger point therapy, and myofascial
release to resolve tension and pain
gently and naturally.
Better Back™Vibration Cushion
Transform your Teeter Inversion Table to
help revive tired, sore muscles. Features
10 vibrating massage motors, neck
support with light-heat technology, and
LCD remote control.
Inversion Program Mat
Enhance your inversion experience
with 24 illustrated stretches and
exercises right at your fingertips.
Provides non-skid protection for
hard floors. 36” x 60”.
DEX II™
A forward-rotating, hip-support
inversion device that allows you to
work your core and improve flexibility
with a variety of inverted stretches
and exercises, plus you can use the
base for reverse dips, modified push-
ups and exercise band work.
If you have any trouble assembling the equipment, or questions
about its use, please contact customer service.
International: Teeter International, Ltd.
Gor-Ray House
758 Great Cambridge Rd
Enfield
Middlesex EN1 3GN
United Kingdom
teeterintl.com | inf[email protected]
USA: Teeter
9902 162nd St. Ct. E.
Puyallup, WA 98375
Toll Free: 800-847-0143
Fax: [phone]
teeter.com | inf[email protected]
USA: 800-847-0143 or [e-mail]
International: [e-mail]