Teeter P2 Quick setup guide

P2
™
Back Stretcher
Assembly & Use Instructions
YEAR
5
W
A
R
R
A
N
T
Y
FULL
* Specifications may vary from this image and
are subject to change without notice.
Congratulations on your purchase of a Teeter®P2™Back Stretcher! This product has been carefully engineered to apply gentle, user-controlled traction to allow the lower back to
decompress, reduce nerve pressure and relax tense muscles.
In order to utilize this product to its fullest extent, it is critical that you review the warnings and carefully follow the assembly and use instructions.
To register your product warranty, go to teeter.com/Support/Warranty-Registration
If you have any questions concerning assembly or if any parts are missing, DO NOT RETURN THE ITEM TO THE STORE OR CONTACT THE RETAILER.
Our dedicated customer service experts can help! Contact Teeter Customer Service at 800.847.0143, or via online forms or Live Chat at teeter.com.

• Read and understand all instructions and inspect the equipment before using the P2. It is your responsibility to familiarize yourself with the proper use of this equipment and the
inherent risks if these instructions are not followed, such as tripping, falling, equipment failure, or aggravating a pre-existing medical condition. It is the responsibility of the owner
to ensure that all users of the product are fully informed about the proper use of the equipment and all safety precautions.
• As with any new exercise program, consult with your physician prior to using the P2. If you have one or more of the below contraindications, you may still be able to use the P2,
however, you must first obtain approval from your licensed physician. The following list of contraindications is not exhaustive, and intended only as a reference.
• DO NOT use aggressive movements, or use weights, elastic bands, any other stretching device or non-Teeter attachments while using the P2. ALWAYS use equipment only for
intended purpose, as outlined in the instructions.
• DO NOT over-stretch. Discontinue use immediately if you experience any worsening pain or if you develop any weakness in your legs.
• To avoid tripping and falling, ALWAYS position and use the equipment while sitting or reclining on a level surface.
• DO NOT use face down or allow use by children or persons with reduced physical, sensory, or mental capabilities, unless they are given supervision and instruction concerning the
use of this tool by a person responsible for their safety.
• DO NOT use in any commercial, rental, or institutional settings. This product is intended for indoor, home-use only. DO NOT store outdoors.
• ALWAYS inspect equipment prior to use, make sure all attachments and fasteners are secure.
4
1
2
Understanding Your P2™
Before reading further, study the diagram to familiarize
yourself with the important components of your P2™.
Assembling the P2
• Align the button located at the base of the Lap Pad Bar with the hole on
the base of the T-Bar.
• Depress the button while inserting the Lap Bar into the T-Bar until it fully
engages into the hole.
• DISASSEMBLE: For storage or travel, reverse the steps above. Depress the
button on the Lap Bar while pulling the T-Bar away until it
completely disengages.
Items for Assembly Items not shown to scale.
Lap Pad Bar Assembly
pre-assembled Lap Pads
Important Safety Instructions
READ ALL INSTRUCTIONS BEFORE USING THE P2
WARNING
!
Lap Pads
Knee Rollers
Hand Grips
Roller Support T-Bar Assembly
pre-assembled Roller Supports
3
T-Bar
• Bone weakness (osteoporosis), recent or
unhealed fractures, and skeletal implants
• Weakness, frailty, mobility issues or instability
of the shoulder, wrist, elbow, or hip
• Dizziness, trouble with coordination
• Spinal injury, tumor, or conditions impacting the
spinal cord
• Rheumatoid arthritis or medical conditions associated
with weight-bearing joints or acutely swollen joints
• Medullary pins or surgically implanted orthopedic supports
• Pregnancy
• Cerebral sclerosis
• Any other medical condition that may be made
more severe through resistance exercise
P21019 P21022

Important Safety Instructions
READ ALL INSTRUCTIONS BEFORE USING THE P2
To avoid the risk of tripping and falling, ALWAYS position and use the equipment while sitting or reclining on a level surface.
DO NOT over-stretch. Discontinue use immediately if you experience any worsening pain or if you develop any weakness in your legs.
WARNING
!
Choose from three different positions depending on your level of comfort or mobility, or desired level of stretch:
Level 1: Light Stretch
Use the P2 in a seated position.
Level 2: Moderate Stretch
Use the P2 on a flat surface with feet flat on the floor.
Level 3: Deep Stretch
Use the P2 on a flat surface with legs elevated.
Fitting the P2
• Position the P2 properly for use: The logos on the Lap Pads should be pointing down, away from the side with the button and logo
screen on the Lap Pad Bar.
• Place the P2 on your lap with the Hand Grips on either side of your hips and the top edge of the Lap Pads in the crease of your thighs.
You may need to adjust the position of the Lap Pads by sliding them along the Lap Pad Bar for a comfortable fit.
• Widen your legs so that the T-Bar lowers between your knees, then close your legs so the Knee Rollers rest behind your knees.
Stretching with the P2
• Grasp the foam Hand Grips and gently push toward your feet in an effort to straighten your arms down the length of your body.
• Relax the muscles in your lower back, allowing the spine to lengthen and decompress.
• Hold for 5-10 seconds only. Rest and repeat as desired. Remember to breathe normally when you are using this device.
• Upon completion, allow your body to rest on the ground 20-30 seconds before exiting the P2.
Dismounting the P2
• Carefully disengage your legs one at a time from the Roller Support Bar and slowly stand up. If you’re performing the Level 2 or 3 Stretch, carefully roll onto your side and use your arms to
help you stand up.
Choosing your Level of Stretch
Level 2 Positioning
Lay down on a flat surface (floor, bed, or yoga mat) with
feet flat on the floor and knees bent in a 900angle.
Level 3 Positioning
Lay down on the floor in front of a chair or couch. Lift
both feet and prop them onto the elevated surface,
scooting your body closer so that your legs and hips
create a 900angle.
90o
90o90o
Level 1 Positioning
Sit at the edge of a flat surface (chair, bed, or couch)
Ensure that nothing can obstruct your arms from
performing the stretch. Knees should be bent in a
900angle.

Specifications subject to change without notice. © COPYRIGHT 2016; International law prohibits any copying. Made in China. P21040 1016-1
reNEW™Muscles Pain Relieving Cream
Deeply penetrates sore and aching muscles on contact.
Specially formulated with emu oil, arnica, MSM,
and glucosamine.
Neck Restore Tension Reliever
Provides support of the upper neck/cervical spine for
self-administered suboccipital release, a technique to
reduce tension in the supporting muscles.
Find These Great Products and More at teeter.com!
If you have any trouble assembling the equipment, or questions about its use, please contact customer service.
International: Teeter International, Ltd.
Gor-Ray House
758 Great Cambridge Rd
Enfield- Middlesex EN1 3GN, United Kingdom
teeterintl.com | [e-mail]
USA: Teeter
9902 162nd St. Ct. E.
Puyallup, WA 98375
Toll Free: 800-847-0143
Fax: [phone]
teeter.com | [e-mail]
USA: 800-847-0143 or [email protected]om | International: [email protected]
T3™Massager
Countless options for self-massage, trigger point
therapy, and myofascial release to resolve tension
and pain gently and naturally.
Tips for Use
To ensure the most effective stretch with the least amount of effort:
• Make sure your legs are bent into roughly a 90 degree angle. This will flatten your lower back and allow
easier decompression.
• Align the Lap Pads at the uppermost part of your thighs, near the hip joint.
• Align your arms so that your elbows are close to your sides to help direct the force applied straight down.
• Use your shoulders to help add force to your push so that you’re not using just arm strength.
• Move around a little and shift the angle of the force to mobilize the hip joint and apply variable pressure.
• Start slowly and only increase the force of traction over time as you feel more comfortable.
• Listen to your body and stop immediately if you feel pain or discomfort. Soreness is an indicator that you may
be doing too much, too soon.
EP-970™Inversion Table
The premier Teeter Inversion Table featuring the Deluxe
EZ-Reach Handle to reduce the need for bending,
Traction Handles to enhance decompression at lesser
angles and Stretch Max Handles for added support
and stretching options.