TeleAdapt TA-7650 MediaHUB HD User manual

TA-7650 and TA-7750 Installation Manual
Last Revision: 9/30/11 11:16 AM
14
▼
HDMI 2
EXLINK
HDMI
5V
▼
Adapter
RS232
Samsung North America
What You Will Need:
-TA-7650 or TA-7650/TA-7500L
MediaHub HD Connectivity Panel
Power Supply Cable (Note: MediaHub with Power/Data Extender model includes
TWO power supplies –one for media panel and one for power panel)
Ethernet Cable (for MediaHub with Power/Data Extender model only)
- MediaHub Cable Kit
HDMI Cable (3m)
RS-232 Cable
DB9-3.5mm Adapter
-Samsung Hospitality Display & Remote Control
Samsung Direct-to-TV Installation Instructions
Follow cable connection instructions illustrated in Figure 1. Then configure the TV and
MediaHub HD according to the model-specific requirements on the following page.
For Samsung 2011 North America Models
For Samsung LED and LCD Hospitality Series displays with EXLINK serial port (factory-
level firmware)
MediaHub HD DIP Mode B7: UP-DWN-UP-UP -- DWN-UP-UP-UP
MediaHub HD Firmware Version: 1.23+
MediaHub HD Video Driver Firmware: 3.26+
Configure TV: Using Samsung remote control, enter the menu by pressing
<MUTE>, <1>, <1>, <9>, <ENTER>. Ensure the following is selected:
Hotel Mode = ON, RJP HDMI Option = HDMI2 and set appropriate SI Vendor.
*If using SI Vendor = ENSEO, please refer to Enseo Installation Instructions section.
For Samsung 2009/2010 North America Models
For Samsung Series 4 LN nn B450C4H and LN nn B457C6H models with EXLINK serial port
(TV firmware v.1011.1+)
For Samsung Series 5 LN nn B550K1H models with EXLINK serial port
(TV firmware v. 1007+)
Figure 1: Samsung direct-to-TV cable
connection diagram.

TA-7650 and TA-7750 Installation Manual
Last Revision: 9/30/11 11:16 AM
15
Samsung 2009/2010 continued:
For Samsung LED Series 4, LED Series 6, LCD Series 3, LED Series 4, LED Series 5 models
with EXLINK serial port (factory-level firmware)
MediaHub HD DIP Mode B7: UP-DWN-UP-UP -- DWN-UP-UP-UP
MediaHub HD Firmware Version: 1.23+
MediaHub HD Video Driver Firmware: 3.26+
Configure TV: Using Samsung remote control, enter the menu by pressing
<MUTE>, <1>, <1>, <9>, <ENTER>. Ensure the following is selected:
Hotel Mode = ON and RJP HDMI Option = HDMI2.
For Samsung 2008 North America Models and Older (non-LodgeNet)
For Samsung Series 4 LN nn A450C1H and Series 6 LN nn A650A1H models with EXLINK
serial port (TV firmware v.1003.8+)
MediaHub HD DIP Mode 57: DWN-UP-DWN-UP -- DWN-UP-UP-UP
MediaHub HD Firmware Version: 1.23+
MediaHub HD Video Driver Firmware: 3.26+
Configure TV: Using Samsung remote control, enter the menu by pressing
<MUTE>, <1>, <1>, <9>, <ENTER>. Ensure the following is selected:
Hotel Mode = ON and RJP HDMI Option = HDMI2.
For Samsung North America Models and an External Enseo STB
Follow instructions for Samsung Direct-to-TV Installation according to the
year/model number of your Samsung display. OR, you may install
MediaHub HD’s serial control connection to the Enseo STB. See instructions
for Enseo STB Installation.
For Samsung North America Models and an External PPV STB
Follow Samsung Direct-to-TV installation instructions according to the year/model number of
your Samsung display. Connect the PPV STB AV Out to TV’s HDMI1 port.
For Legacy Samsung + LodgeNet environments, please refer to the LodgeNet STB section.
Or, follow Standard Installation instructions on Page 9 and configure the guest access
technique (channel map, program INPUT button on remote control, or program LodgeNet on-
screen prompt.)