Tempur-Pedic ERGO User manual

ERGOTM
OWNER’S MANUAL
MANUEL DU PROPRIÉTAIRE
Tempur-Pedic Customer Service U.S.: 1-800-821-6621 | Canada: 1-800-887-4321 | México: 01-722-273-1810
Service à la clientèle Tempur-Pedic É-U. : 1-800-821-6621 | Canada : 1-800-887-4321 | México: 01-722-273-1810
Servicio al Cliente Tempur-Pedic É-U. : 1-800-821-6621 | Canada : 1-800-887-4321 | México: 01-722-273-1810
MANUAL DEL PROPIETARIO

table of contents
Safety Precautions and Usage Statements ......................................................1-2
Parts List ...................................................................................... 3
Base Overview ................................................................................ 4
Quick Reference Guide ......................................................................... 5
Installation Guide .............................................................................6-7
Remote Control ............................................................................. 8-9
Remote Control Pairing .........................................................................10
Emergency Battery Backup Box ................................................................ 11
Connecting Strap ..............................................................................12
Syncing Two Bases.............................................................................13
Headboard Brackets (not included)..............................................................14
Troubleshooting ...............................................................................15
Warranty ...................................................................................16-17

table des matières
Consignes de sécurité et directives d’utilisation ...............................................18-19
Liste des pièces ...............................................................................20
Aperçu de la base .............................................................................21
Guide de référence rapide ..................................................................... 22
Guide d’installation .........................................................................23-24
Télécommande ............................................................................25-26
Couplage des télécommandes ................................................................. 27
Boîtier des piles de secours .................................................................... 28
Attaches de raccordement.....................................................................29
Synchronisation de deux bases ................................................................30
Guide d’installation des xations de la tête de lit (non incluses) ...................................31
Dépannage ................................................................................... 32
Garantie...................................................................................33-34

tabla de contenidos
Precauciones de Seguridad. ................................................................35-36
Lista de las Partes............................................................................. 37
Diagrama de la Base .........................................................................38
Guía de Conexiones. ..........................................................................39
Guía de Instalación de la base .............................................................. 40-41
Control Remoto ...........................................................................42-43
Conguración de Control Remoto ..............................................................44
Caja de Emergencia ..........................................................................45
Correas de Conexión ..........................................................................46
Sincronización de Dos Bases. .................................................................. 47
Guía de Instalación de Soportes de la Cabecera (opcional /no incluida) ............................48
Solución de Problemas. .......................................................................49
Garantía....................................................................................50-51

1
safety precautions and usage statements
Attention: Important Safety Disclaimers
Read all instructions before using your TEMPUR-PEDIC ERGOTM adjustable base.
SAVE THESE INSTRUCTIONS.
To reduce the risk of shock, burns, re or injury:
Always unplug the base from the electrical outlet before servicing
any part of the base. To reduce risk of electric shock, unplug the
base before cleaning. To safely disconnect, ensure the base is in a
at position with all motors off, and unplug from power source.
Keep the power cord away from heated surfaces. Never operate
the base when the air openings are blocked. Keep air openings free
of lint, hair and the like. Do not drop or insert any object into any
opening.
Discontinue use of the bed base and contact a qualied service
center if: it has a damaged cord or plug, is not working properly, or
has been dropped into water.
Only use this bed base for its intended use as described in
this manual. Do not use accessories/attachments that are not
recommended by the manufacturer.
Close supervision is required when the bed base is used by or near
children, convalescents or disabled persons.
Outlet Safety:
For optimal safety and operation, plug bed base into a
surge protector (not included).
The bed base should only be plugged directly into a wall outlet
or surge protector (recommended). Improper connection of the
equipment can result in the risk of electrical shock, electrical re
or faulty operation of this bed base. If the plug does not t your
outlet, contact a qualied electrician to install a suitable outlet.
Unauthorized modication or failure to use a wall outlet or surge
protector could void the electrical portion of your warranty.
Warranty Warning:
Do not open or tamper with control box, motors, or remote (with
the exception of battery compartments). The warranty will be void
if the internal workings of these components are tampered with. For
complete warranty information refer to the warranty information
section on pages 16-17.
In-Home Use and Hospital Disclaimer:
The TEMPUR-PEDIC ERGOTM adjustable bases are designed solely for
in-home use. This base was not designed as a hospital bed and is
not designed to meet hospital standards. Do not use this base with
TENT TYPE oxygen therapy equipment or near explosive gases.
Pets and Small Children:
Immediately dispose of all packing materials as they may pose a
smothering risk to small children and pets. To avoid injury, it is not
advised to allow children and small pets to play on or under the bed.
Children should not operate the bed base without adult supervision.
Safety Features:
Free-release head and foot motors are designed to lower the
mattress by retracting only with gravity, never pulling downwards,
which minimizes pinch points.
The remote control is programmed with a child lock feature. More
information on activation and deactivation of this feature can be
found on page 10.
Model No:
Twin Long: 19001-38.80-4166
Full: 19001-54.74-4166
King: 19001-76.80-4166
CA King: 19001-72.84-4166
Queen: 19001-60.80-4166
CA King Split: 19001-36.84-4166

2
Power Ratings:
INPUT: AC 100–240V 50/60 HZ 2.0A
OUTPUT: DC 29V 2.0A
WATTS: 58W
Product Ratings:
The lift motors are not designed to operate continuously for more
than two [2] minutes in an eighteen [18] minute time period or
approximately 10% duty cycle. Attempting to circumvent or exceed
this rating will shorten the life expectancy of the product and may
void the warranty.
The massage motors are not designed to operate continuously for
more that 30 minutes at a time. Please allow the massaging system
to rest for 30 minutes after automatic massage shut off before
restarting.
Weight Limits:
The recommended weight limits on the TEMPUR-PEDIC ERGOTM are:
Twin Long / Full / Queen / King / Split CA King / CA King: 700
pounds.
Maximum weight the bed can support per person is 275 pounds
with the weight evenly distributed across the head and foot
sections. This product is not designed to support or lift this amount
of weight in the head or foot sections alone. NOTE: Exceeding the
recommended weight restrictions could damage your TEMPUR-
PEDIC ERGOTM and void your warranty. For best performance, you
should enter and exit the TEMPUR-PEDIC ERGOTM while it is in the
at or fully lowered position.
TEMPUR-PEDIC ERGOTM ts easily inside bed frames, furniture beds
and platform beds that are certied to hold a minimum of 900
pounds. If using this adjustable base without the legs and placing
directly on a bed frame or platform bed, cross-bed supports (slats)
are strongly recommended to ensure TEMPUR-PEDIC ERGOTM
maintains stability during operation.
Acoustics:
In normal base operation the wheels, which allow the bed to
maintain its distance from the wall, will make contact with the
steel platform supports of the base creating a contact noise. When
entering, exiting or shifting weight on the base, this contact noise
may be audible as the wheels make contact. This is normal.
Fabric Care:
To prolong the life of your fabric, protect from direct sunlight
whenever possible. For spot cleaning, wipe area with a light
damp sponge or vacuum with a soft brush attachment to remove
particles. Keep at a minimum of 30cm (12 inches) away from direct
heat sources.
For deeper cleaning, blot liquid spills with a clean dry cloth.
Wipe with a clean cloth dampened with warm water. Do not wet
excessively. A soft bristle brush may be used to remove ingrained
soil. Avoid scratching by gentle brushing. Wipe with a clean cloth
dampened with warm water to remove residues after brushing. Dry
in shade away from direct heat.
If persistent marks remain visible after cleaning, seek professional
advice.
safety precautions and usage statements
FCC Compliance:
This device complies with part 15 of the FCC Rules. Operation is subject
to the following two conditions: (1) This device may not cause harmful
interference and (2) this device must accept any interference received,
including interference that may cause undesired operation.
To comply with the FCC RF exposure compliance requirements, no
change to the antenna or the device is permitted. Any change to the
antenna or the device could result in the device exceeding the RF
exposure requirements and void user’s authority to operate the device.
Radio Frequency: 2.4 GHz
CAN ICES-3 (B)/NMB-3(B)
Exceeding this weight restriction could damage the bed
and/or cause injury and will void the warranty.

3
parts list
All electronics and components that need to be installed
are located in boxes under the base or attached to the
frame.
A) Wireless Remote Control (1) AAA Batteries (3)
B) Mattress Retainer Bar (1)*
C) Legs (6)
D) Power Cord (1)
E) Power Supply (1)
F) Battery Backup Box (1) (9-Volt batteries not included)
G) Connecting Strap ‡*
H) Sync Cord ‡
Miscellaneous Parts (not included):
Surge Protector (1)
9 Volt Batteries (2)
* These items are attached to the base for shipping purposes.
Carefully remove from base and set aside.
‡ Only included in Twin Long, and California King Split bases.
Before discarding the packing materials, ensure all the parts are accounted for.
A
D
G
B
E
C
F
H
IMPORTANT!: For your safety, read the owner’s manual
carefully and completely before operating this product.
Electric shock may occur if electrical components are not
installed or operated according to these guidelines.
A) * C)
D) E) F)
‡* ‡

4
base overview
Foot
Motor
Head
Motor
Control Box
USB Ports
USB Ports
Massage
Motor
Massage
Motor
Battery Backup Box
Underbed Light
Underbed Light
Underbed Light

5
Not to scale. For illustration purposes only. Read all instructions before beginning installation.
If installing a split unit, see pages 12-13.
quick reference guide
Power Cord
Input
Power Cord
Power Supply
Control Box
connection ports
to head and foot
motors (massage
and lift). Installed
under the base.
Battery Backup Box
USB Charging Ports
USB Charger
Splitter
Underbed Lighting

6
Legs are shipped fully assembled. Alternative heights in 3"
increments can be achieved by removing leg segments.
To install the legs, thread the leg into frame, and tighten by
hand. Do not over tighten.
STEP 1
STEP 2
installation guide
Always use two people when setting up the base.
Place the bed base box in a desired location with the
bottom of the box facing up.
Remove the binding straps and packing materials, making
sure not to puncture the box with any sharp objects.
Remove the bed base from the box.
Unfold the bed making sure to keep the
bottom of the bed facing upwards.
STEP 3
STEP 4
STEP 5
STEP 6
Uncoil input power cord (connected
to control box's power port) and
plug into power supply.
If installing a split unit, see page 13.
To install headboard brackets (sold separately), see
instructions on page 14.
Locate the battery backup box
and install (2) 9-Volt batteries (not
included).
(For operating instructions see page
11).
Uncoil the power cord and connect to
the power supply. Place power supply
on the ground and extend from the
base. Ensure that the power supply
and all attached cords are directed
toward the desired surge protector.
For Tempur-Pedic customer service call: U.S. 1-800-821-6621 | Canada: 1-800-887-4321 | México: 01-722-273-1810

7
STEP 7
STEP 8
STEP 9
Carefully ip the base over on to its legs. Important: Two
people are required to move the bed base. Do not drag
across the oor. Do not rest frame on its side, excessive
pressure may damage the legs.
Plug the power cord into a power source. A surge
protector is recommended.
Ensure batteries are correctly installed in the back of the
remote.
Quickly test functions to verify proper setup before placing
mattress on base. Return the base to a at position before
placing the mattress on top.
Setup is now complete! Test all functions on remote.
To install the mattress retainer bar, insert each end of the
bar into the holes at the foot of the platform.
installation guide
STEP 10
For Tempur-Pedic customer service call: U.S. 1-800-821-6621 | Canada: 1-800-887-4321 | México: 01-722-273-1810

8
Remote Control arrives paired to the adjustable base.
Three (3) AAA batteries are required to operate the remote.
remote control
MASSAGE
Head Zone Massage Control
Activates simple steady-state massage and
toggles through 2 intensity levels. Low, high
and off.
Foot Zone Massage Control
Activates simple steady-state massage and
toggles through 2 intensity levels. Low, high
and off.
Massage Wave Mode Control
Turns on and activates programmed
massage mode. Toggles wave modes 1, 2 ,3
and off. Intensity default is low.
There are 3 possible wave massage modes and 2 intensity levels
to choose from. Press the Wave Massage Mode Selector to choose
the desired mode (1,2,or 3), then use the Head Massage and/or the
Foot Massage buttons to cycle through the available intensity levels.
Once the massage mode is chosen, it will run for 30 minutes unless
it is cancelled by pressing the Wave Massage Mode Selector button
repeatedly until massage stops.
If one of the wave massage modes is not needed, pressing Head
and/or Foot Massage buttons will initiate massage for those sections
and cycle through 2 different intensity levels as well as "OFF".

9
remote control
ADJUST
Head Position Adjustments
Use to raise and lower the head section of
your adjustable base.
Foot Position Adjustments
Use to raise and lower the foot section of
your adjustable base.
PRESET
Zero G ‡
Adjusts your legs to relieve pressure off the
lower back.
Flat *
One-Touch Flat lowers head and foot to at
position and turns off massage (if running).
TV in Bed Preset Position ‡
Brings head and foot into position for
viewing TV.
Anti-Snore Preset Position ‡
Raises the head of the bed slightly to help
open airways.
Favorite 1 Preset Position ‡
Reprogrammable Preset Position.
Underbed LED lighting *
Turn on/off underbed LED lighting.
* Not user programmable.
‡ Can be reprogrammed to user desired position.
The ZERO G, TV in Bed, Anti-Snore, and Favorite 1 in
bed presets can be re-programmed to any position
chosen by the user. Simply adjust the bed to the desired
position, then hold any of the 4 buttons down until the
remote backlight ashes twice. The button is now re-
programmed.
To restore the buttons to their original positions, depress
the One-touch Flat and Zero-G buttons simultaneously
for 5 seconds. The remote backlight will ash twice to
indicate the original positions have been restored.
Remote Control arrives paired to the adjustable base.
Three (3) AAA batteries are required to operate the remote.

10
remote control pairing
Remote Pairing
*ALTERNATE REMOTE PAIRING PROCESS
Locate the control box (see parts list on page 4) and
press the button twice. A green LED light will illuminate
on the control box. On the back of the remote, press and
hold the PAIR button. The PAIR button will illuminate
blue and start ashing. When the PAIR button stops
ashing, the green LED light on the control box will go
out. Release the PAIR button. The remote is now paired
to the adjustable base.
Battery
backup box
button
PAIR
Button
Test all remote functions. If the remote buttons do
not impact the adjustable base movements, please
repeat the process again or call Tempur-Pedic customer
service: U.S. 1-800-821-6621 | Canada : 1-800-887-4321
México: 01-722-273-1810
STEP 1
STEP 2
The original remote that comes in the box is already paired to the adjustable base. No further action is required. In the event
that the remote is not paired with the base, follow the steps below.
Locate the battery backup box and
press the button TWICE. A light
on the battery back up box will
illuminate.
Remove the back cover of the
remote, press and hold down the
PAIR button. The PAIR button will
illuminate blue and start ashing.
When the PAIR button stops
ashing, the illuminated light on
the battery backup box will go
out. Release the PAIR button.
The remote is now paired to the
adjustable base.
STEP 3
Child Lock Feature
Press and hold HEAD UP and HEAD DOWN
buttons together for approximately six (6) seconds.
The remote backlight will ash twice. When the
backlight light goes away, the remote is now in
Child Lock. Pressing any buttons while in Child
Lock will yield no movement to your adjustable
base.
Press and hold FOOT UP and FOOT DOWN buttons
together for approximately six (6) seconds. The
remote backlight will ash twice. When the
backlight light goes away, the remote is no longer
in Child Lock. The remote and adjustable base will
work normally.
Activate Child Lock
Deactivate Child Lock

11
emergency battery backup box
Two (2) 9 Volt batteries are required to operate the battery backup box feature and are NOT included.
For emergency use only, in case of a power outage.
In the event that the base is stuck in an articulated
position during a power outage, the battery backup
box will return the base to a at position. Batteries
are not to be used for normal operation of the base.
Install the 9 Volt batteries into the provided battery
backup box.
Do not mix brand name batteries.
Press the button on the battery backup box to
lower the base to at position.
OVERVIEW
STEP 2
STEP 1
Control Box
Battery
Backup Box
For Tempur-Pedic customer service call: U.S. 1-800-821-6621 | Canada: 1-800-887-4321 | México: 01-722-273-1810

12
Connecting straps are secured to the base frame upon delivery.
If a split setup is being installed, plastic connecting straps are provided (one per
base) to secure the bases together. Use both straps to secure the head and foot
portions together.
With the bases in their desired location, slightly
loosen both legs to allow the strap to t on the leg
bolt, between the leg washer and frame.
Slide side (a) of the connecting strap onto leg bolt.
Swing the strap and connect side (b) to the leg bolt.
Secure the strap by shifting to the left.
Re-tighten legs. Do not over tighten. Use the
remaining strap on other end of the base.
OVERVIEW
STEP 2
STEP 1
connecting strap (optional)
ab
STEP 3

13
syncing two bases (optional)
A Sync Cord is included with Twing Long and Split Cal King size bases.
The Sync Cord connects the two control boxes to a single remote for the synchronization of two bases.
Disconnect the battery backup box cable from each
control box or splitter cable (make note where the
cable was plugged in).
Plug bases back into the power source. If bases become mismatched, return both bases
to the at position to re-sync the bases.
Connect the male end of each sync cord to control
box or splitter cable. Insert it into the same port
that you disconnected the battery backup box from
in Step 2.
Check to ensure all cords are securely attached.
Both remotes will now operate both bases
simultaneously.
Unplug the base(s) from power source.
Connect each battery backup box male connection
to the sync cord female connection (Refer to
illustration at right).
STEP 3
STEP 6
STEP 2
STEP 5
STEP 1
STEP 4
PERFORMANCE NOTES
Battery
Backup
Box 1
Sync Cord
Battery
Backup
Box 2
Control Box 1 Control Box 2
The system is now linked. Pressed buttons on either
remote will control the two bases simultaneously.

14
headboard bracket installation guide (optional)
Connect your headboard to the attachment plate using the
remaining long screws or hardware that came with your
headboard. The heads of the bolts will face outward. Use hex
key to tighten bolts.
STEP 1
STEP 2
STEP 3
a.) Align the hole in the bracket to the brass sleeve into
which the leg threads. Hold the bracket in place and
screw the leg into the base until it is snug. DO NOT
OVERTIGHTEN.Too much force may cause the leg to
spin freely.
b.) Align the tab with the hole in the frame (located towards
the foot of the base) and use a short bolt, washer and
wingnut to secure the bracket. Make sure the bolt is
tight.
a.) Measure the distance between the mounting holes on the
headboard and install the T-Bracket to accommodate the
headboard.
Headboard Brackets are an optional accessory and are not included.
A hex key is included with the accessory kit to complete installation.
b.) To install the T-Bracket, slide the T-Bracket through the
end of the headboard bracket. Align the at side of the
T-Bracket plate to the mounting holes on the headboard.
c.) Secure T-Bracket in place by inserting two short screws
through top of bracket. Use hex key to tighten screws.

15
troubleshooting
• Check under the bed base to verify that the wired connections are secure and that there are
no cords or bedding obstructing the movement of the base.
• Check to ensure the LED light is illuminated on the control box. If there is no light, verify that
the input and power cords are properly connected.
• Unplug the base for 60 seconds to reset the electronic components.
• Plug bed base into a different electrical outlet, or test current outlet with another working
appliance (a grounded, electrical surge protector is recommended).
ADJUSTABLE BASE
If your issue is not resolved by following the instructions above, please locate the serial number on the
warranty card or back of the remote control and call the customer service team for your region.
For Tempur-Pedic customer service call:
U.S. 1-800-821-6621 | Canada: 1-800-887-4321 | México: 01-722-273-1810
REMOTE
If one or more functions on the bed base have stopped operating:
• Ensure that your remote batteries are properly installed or do not need replacing.
• Ensure Child Lock feature is not enabled. See page 10 for more information.
• Ensure that the remote control is paired to the bed base.

16
warranty information
TEMPUR-PEDIC®NORTH AMERICA, LCC (TEMPUR-PEDIC®) WARRANTS THAT
IT WILL, AT TEMPUR-PEDIC’S OPTION, REPLACE OR REPAIR PURCHASER’S
TEMPUR-PEDIC ERGOTM MODEL IF IT IS DEFECTIVE DUE TO FAULTY
WORKMANSHIP OR MATERIALS, SUBJECT TO THE LIMITATIONS DESCRIBED IN
THIS WARRANTY.
TEMPUR-PEDIC®UNDERTAKES NO RESPONSIBILITY FOR THE QUALITY OF THE
GOODS EXCEPT AS OTHERWISE PROVIDED IN THIS WARRANTY. THERE ARE
NO WARRANTIES THAT EXTEND BEYOND THE DESCRIPTION ON THE FACE
THEREOF.
THIS WARRANTY APPLIES ONLY TO TEMPUR-PEDIC ERGOTM MODEL. THIS
MODEL MAY BE IDENTIFIED BY REFERENCE TO THE SERIAL NUMBER ON THE
PRODUCT.
YEARS 1 THROUGH 3: FULL COVERAGE OF PARTS AND LABOR
TEMPUR-PEDIC ERGOTM is warranted against defects in the workmanship or
materials for a period of three (3) years from the warranty commencement date.
During these rst three years of the warranty, the entire product is so covered,
including factory supplied electronics, electrical components, drive motors and
power supply components. Upon notice during the rst through third year from
the warranty commencement date, Tempur-Pedic®will send replacement parts to
the purchaser, at no cost, in order to replace any such defective part. In addition,
Tempur-Pedic®will pay all authorized labor and transportation costs associated
with the repair or replacement of any parts which Tempur-Pedic®determines to
be defective. This three (3) year warranty shall not apply if the purchaser does not
return any and all defective parts to Tempur-Pedic®within 15 days of purchaser’s
receipt of such replacement parts furnished. Return of the frame, however, should
it need to be replaced, is not required.
In no instance will this warranty cover any damage attributable to misuse or to
normal wear and tear or to excessive weight placed upon the product. Nor will this
warranty cover any purchaser other than the original purchaser nor will it cover
product purchased from an unauthorized third party. If you are not the original
purchaser of this product, you take “as is” and “with all faults.” If you did not
purchase this TEMPUR-PEDIC ERGOTM we will require proof of purchase from you
demonstrating that you are the original purchaser and are eligible to make a valid
claim under this Warranty.
YEARS 4 THOUGH 5: FULL COVERAGE OF PARTS ONLY
Upon notice during the years four (4) and ve (5) from the warranty
commencement date, Tempur-Pedic®will offer replacement parts for any defective
parts to the purchaser. Factory supplied electronics, electrical components, drive
motors and power supply components are included. This two (2) year Warranty
shall not apply if purchaser does not return any and all defective parts to Tempur-
Pedic®within 15 days of purchaser’s receipt of replacement part. Purchaser shall
bear all service, transportation, labor and shipping costs related to the delivery
and/or replacement of the defective part.
FRAME ONLY - YEARS 1 THROUGH 25 WARRANTY
Notwithstanding the above, Tempur-Pedic®extends a 25 Year Warranty on the
frame itself used in this product. Specically, Tempur-Pedic® warrants that for a full
25 years, any defect in the workmanship or the materials used in the frame itself
shall be covered. In the event of a frame defect, full product replacement will be
offered. For purposes of this 25 Year Warranty, the frame consists of the metal
structure of the base and specically excludes its cover, its side rails, decking and
legs, actuator lift motors, control box, remote controls, power supply, and any
power supply cords.
ADDITIONAL TERMS AND CONDITIONS
In no instance will this warranty cover any damage attributable to misuse or to
normal wear and tear or to excessive weight placed upon the product. Nor will this
warranty cover any purchaser other than the original purchaser nor will it cover
product purchased from an unauthorized third party. If you are not the original
purchaser of this product, you take “as is” and “with all faults.” If you did not
purchase this TEMPUR-PEDIC ERGOTM directly from Tempur-Pedic®we will require
proof of purchase from you demonstrating that you are the original purchaser and
eligible to make a valid claim under this Warranty.
This Warranty does not include coverage for damage caused by the purchasers
or by other users if the product has been used in a manner inconsistent with
the operation and maintenance procedures outlined in the Complete Reference
Guide, this Warranty, or any other applicable document published or approved by
Tempur-Pedic®. Nor does it include coverage if the product has been repaired or
modied by the purchaser or by an unauthorized third party or if the product has
been damaged in transit. This Warranty does not apply to damage to mattresses,
fabric, cables, electrical cords or items supplied by Resellers, as dened below.
Contact the Reseller or other appropriate party for warranty information on these
items. Nor does this Warranty apply to any unnecessary service calls, including
costs for in home service calls solely for the purpose of educating the consumer
about the unit or nding an unsatisfactory power connection. In addition, if the
recommended weight restrictions are not followed (Twin Long, Full, Queen, King,
CA King, and Split CA King bases - up to 700 lbs. each) this Warranty is void.
Replacement parts may be new or reconditioned at Tempur-Pedic®’s discretion.
Except for the 25 Year Warranty provided for the frame of this product, there is
no warranty at all after ve years, dating from commencement of this Limited
Limited Warranty for TEMPUR-PEDIC ERGOTM