Tempur-Pedic TP300 User manual

8
5
6
4
3
2
1
7
9
10
11
10
11
Blue
Red
Attach Backrest (7) to the Seat (6) using
4pcs Screws and 4pcs Washers (9). Tighten
securely with enclosed Allen Wrench (13).
Insert 2pcs Screws (11) into the rear holes
of Armrest (10) as shown, attaching Armrest
(10) to Backrest rst. Do not fully tighten
these 2 screws until told to in Step 5.
Press Casters (1) into holes of the Base (2).
Insert Seat Post (3) and Seat Post Cover
(4) into the center hole of the Base (2).
For easy assembly, place Seat (6) face
down on a at surface. Attach Mechanism
(5) to Seat (6) using 4pcs Screws and 4pcs
Washers (8). Tighten securely with
enclosed Allen Wrench (13).
12
Attach Armrest (10) to Seat using 8pcs
Screws (11) as shown. Tighten securely with
enclosed Allen Wrench (13).Now fully
tighten the 2 screws (1 1) from Step 4 into
the Backrest. Attach 2pcs Arm Screw Caps
(12) to cover exposed holes on Armrest
(10).
Turn assembled seat upright and locate
center hole of Mechanism over Seat Post.
Push down rmly until connection is secure.
Before using your chair, ensure that all the
screws are tightened fully for safety. You
can now enjoy the comfort of your new
chair!
NOTE: Please keep the enclosed Allen
Wrench and check all screws every six
months to ensure they remain tightly
fastened.
6

TILTTENSIONADJUSTMENT: