Tenda TEI480T User manual

TEI480T/490T/4000TEI480T/490T/4000
Enterprise & Net-bar Level Router
User's ManualUser's Manual
WWW.TENDA.CN

Copyright Statement
is the registered trademark of Shenzhen Tenda
Technology Co., Ltd. Other trademark or trade name mentioned herein
are the trademark or registered trademark of the company. Copyright
of the whole product as integration, including its accessories and
software, belongs to Shenzhen Tenda Technology Co., Ltd. Without
the permission of Shenzhen Tenda Technology Co., Ltd, individual or
party is not allowed to copy, plagiarize, imitate or translate it into other
languages.
All the photos and product specifications mentioned in this manual
are for references only, as the upgrading of software and hardware,
there will be changes. And if there are changes, Tenda is not
responsible for informing in advance. If you want to know more about
our products information, please visit our website at www.tenda.cn

TEI480T/490T/4000 Enterprise & Net-bar Level Router
2
Table of Contents
Chapter One Introduction………………………………………………...…...3
1.1 Function……………………………………………………….……………...3
1.2 Unpacking……………………………………………………………….…...5
Chapter Two Hardware Installation………………………………………….6
2.1 Front Panel………………………………………………………………..…6
2.2 Rear Panel…………………………………………………………….……..7
2.3 Physical Environment………………………………………………….……7
2.4 Steps………………………………………………………………….…..…..7
Chapter Three Connect to the Broadband Router……………….……….8
3.1 Set up LAN Connection……………………………………………….……8
3.2 Set up WAN Connection……………………………………………………8
Chapter Four Configuration on the Router………………………...………9
4.1 Set up proper Network Configuration…………………………………..…9
4.2 ISP Configuration………………………………………………...……...…10
4.2.1 Wizard………………………………………………………….………….10
4.2.1.1 PPPoE (ADSL)……………………………………….…………………11
4.2.1.2 Dynamic IP……………………………………………….……………..11
4.2.1.3 Static IP……………………………………………………….…………11
4.3 Configuration…………………………………………………..……………12
4.3.1 Start and Log In…………………………………………………………..12
4.3.2 Running Status…………………………………………………………...12
4.3.3 General Setting……………………………………………..……………13
4.3.3.1 LAN Setting……………………………………………….…………….13
4.3.3.2 WAN Setting…………………………………………….…………...…14
4.3.3.3 MAC Clone……………………………………………………………..15
4.3.3.4 DNS Server……………………………………………………..……...16
4.3.3.5 Access Limit…………………………………………………………….16
4.3.4 DHCP Server……………………………………………………………..17
4.3.4.1 LAN DHCP Server………………………………………..……………17
4.3.4.2 DHCP Client List…………………………………………………… .. 18

TEI480T/490T/4000 Enterprise & Net-bar Level Router
3
4.3.5 Advance Setting…………………………………………….....…………19
4.3.5.1 Statistic……………………………………………………………….…19
4.3.5.2 Port Monitor…………………………………………………………….20
4.3.5.3 VLAN……………………………………………………………...…….20
4.3.5.4 Bandwidth Control……………………………………………..………21
4.3.5.5 LAN IP Control…………………………………………………..……..22
4.3.5.6 ARP Bind………………………………………………………..………22
4.3.6 Virtual Server………………………………………………………….….23
4.3.6.1 Virtual Server…………………………………………….………….….23
4.3.6.2 UPnP Setting………………………………………..………….……....25
4.3.6.3 DMZ…………………………………………………………….….……25
4.3.7 Security Setting…………………………………………….…………….26
4.3.7.1 Client Filter………………………………………………..……………26
4.3.7.2 URL Filter……………………………………………………………….27
4.3.7.3 MAC Filter………………………………………………………………28
4.3.7.4 Defense Network Attack……………………………..………………..29
4.3.7.5 Remote Control………………………………………………….……..30
4.3.7.6 Special Application Filter………………………………………………31
4.3.8 Route Setting………………………………………………….……….…31
4.3.8.1 System Routing Table………………………………………………….31
4.3.8.2 Static Routing Table……………………………………………………32
4.3.9 System Tool………………………………………………..….………….32
4.3.9.1 Time Setting…………………………………………………………….33
4.3.9.2 DDNS………………………………………………………….…..…….33
4.3.9.3 Backup/ Resume settings…………………………………..…...…….34
4.3.9.4 Software Upgrade ………………………………………….….…...….35
4.3.9.5 Restore to Factory Setting………………………………….……....…36
4.3.9.6 Restart……………………………………………………………...…...36
4.3.9.7 Change Password……………………………………….….……..…..37
4.3.9.8 System Log………………………………………………….………….37
4.3.9.10 Log out……………………………………………………………...…37

TEI480T/490T/4000 Enterprise & Net-bar Level Router
4
Chapter One Introduction
Thanks for purchasing TEI480T/490T/4000 Enterprise/Net-bar level router.
TEI480T/490T/4000 is Tenda’s latest multifunctional broadband access
products specially designed for Net-bar, community, enterprise and school.
TEI480T/490T/4000 are adopting the world level high quality, high stability
Intel IXP high level network processor, main Frequency is up to 266/533
MHz, adopting six-layers PCB professional design, fully ensuring the
powerful function and super stability of the machine. Full duplex data
transferring up to 200Mbps, supports up to 60,000 Link counts, data packing
is fast and stable. Powerful Firewall is able to prevent various hacker
attacks, ARP attacks and cheating and ARP virus etc.
TEI480T/490T/4000 are equipped with all the common function of other
broadband routers, besides, TEI480T/490T/4000 also supports Statistic
monitoring on clients, Bandwidth control based on IP address, Link Count
Controlling on a certain computer, IP and MAC address binding, Port
Mirroring, VLAN, UPnP, DDNS, VPN Pass-through and Firewall etc. Please
read this user’s manual carefully before using.
1.1 Function
 Compliant with IEEE802.3, IEEE802.3u, IEEE802.3x
 Supports CSMA/CD, PPPoE, PPP, IP, ARP, DHCP, TCP, UDP, HTTP,
FTP, DNS protocol
 Supports 1 10/100Mbps Auto-Negotiation WAN port, connectable to
xDSL/Ethernet/Cable

TEI480T/490T/4000 Enterprise & Net-bar Level Router
5
 Supports 4 10/100Mbps Auto-Negotiation LAN ports, connectable to
LAN
 Supports port bandwidth control, port VLAN dividing and port mirroring
 Supports Statistic function, enables administrator to analyses the
whole network usages status
 Support Web-Management function including IP client filtering, URL
Filtering, MAC Address filtering etc.
 Support VPN Pass-through
 Supports QoS configuration based on IP or Port, enables you to
control the bandwidth of a certain client
 Supports IP and MAC address binding, prevent from ARP attacks
 Support virtual server, special software, DMZ and static routing
 Supports Link count configuration and limit the Link count of a certain
computer
 Built-in firewall, supports IP address Filtering, URL Filtering，MAC
Address Filtering
 Prevent from DoS attack, ARP attack, able to separate the computer
which is infected by virus
 Support remote Web Management, English configuration Interface,
supports simple and easy configuration guide
 TEI4000 supports one SFP expansion slot, supports optical fiber
connection

TEI480T/490T/4000 Enterprise & Net-bar Level Router
6
1.2 Unpacking
ITEM Quantity
TEI480T/490T/4000 Enterprise and Net-bar Level router 1 Unit
Power cord 1
User’s Manual 1 copy
Quality Warranty Card 1 copy
Quality Passed Certificate 1 copy
Fast installation guide 1 pcs
Mounting Brackets 4 pcs
Rubber feet used for shock cushioning 4 pcs

TEI480T/490T/4000 Enterprise & Net-bar Level Router
7
Chapter Two Hardware Installation
2.1 Front Panel
a. Reset: Button for Resetting the router. Please press the Reset Button for
5 seconds and the SYS LED Indicator would be blinking. After 5 seconds,
please un-press the button, the router would restore to factory default
setting and restart automatically.
b. LED Indicators:
LED
Indicator
Description Function
POWER Indicating the
Status of the Power
When the power LED lights on, the
Switch is receiving power
SYS Indicating the
Status of the
System
When the SYS LED is blinking, the
system is working normally.
When the SYS LED lights ON or OFF,
the system is working abnormally.
Link/Act Indicating the
Status of WAN and
LAN
When the LED lights ON, the
respective port is successfully
connected to the Ethernet network.
When the LED is blinking, the
respective port is transmitting or
receiving data.
100Mbps Indicating the When the LED for 100M lights ON, the

TEI480T/490T/4000 Enterprise & Net-bar Level Router
8
Speed of WAN and
LAN
respective port is working at the speed
of 100M;
When the LED for 100M lights OFF, the
respective port is working at the speed
of 10M
c. WAN Port: Wide Area Network (RJ-45). Please connect the xDSL Modem
or the Ethernet access cable to the WAN port of the router.
d. LAN Port: Local Area Network (RJ-45). Please connect the LAN port to
computer, Hub or Switch.
2.2 Rear Panel
Power: Please use the power attached in the package.
2.3 Physical Environment
Required Physical Environment for Installation:
 Please place the router on a sturdy level surface and install the router
in a site free from high heat.
 Please place the router in wet or dirty places.
 Please do not wipe the router with wet cloth.
 Recommend operating environment:
Temperature:0℃~38℃(32℉~100℉)
Humidity: 5%~90% RH (Non-condensing)
2.4 Steps
a. Set up LAN Hardware connection

TEI480T/490T/4000 Enterprise & Net-bar Level Router
9
Please connect the LAN port with the switches or Hubs in the LAN. Or you
can also connect the LAN port of your router directly to the LAN adapter of
your computer.
b. Set up WAN Hardware connection
Please connect your xDSL or Ethernet to the WAN port of the router with
Cat. 5 cable.
c. Connect the power cord
Please connect the power cord correctly and the router would start
automatically.
Note: TEI4000 supports one SFP expansion slot, supports optical fiber
connection

TEI480T/490T/4000 Enterprise & Net-bar Level Router
10
Chapter Three Connect to the Broadband Router
3.1 Set up LAN Connection
Please connect the LAN port with the switches or Hubs in the LAN. Or you
can also connect the LAN port of your router directly to the LAN adapter of
your computer.
3.2 Set up WAN Connection
Please connect your xDSL or Ethernet to the WAN port of the router with
Cat. 5 cable.
Dynamic IP: To distribute IP Address through DHCP service
Static IP: To connect to the Internet through fixed IP Address provided by
your ISP
Chapter Four Configuration on the Router
Before using the router, please have proper network configuration on your
computer, this would enables you to have normal communication with the
router.
4.1 Set up proper Network Configuration
 Please set the IP address of your computer as auto-obtain or Fix IP
Address. The router has its factory default IP address which is
“192.168.0.1”, please open IE and enter “192.168.0.1” in the address
bar. The system would require the user to enter User Name and
Password as the figure below. Please enter the User Name and

TEI480T/490T/4000 Enterprise & Net-bar Level Router
Password in the dialogue box (the default value for User name and
Password are “admin”). It is recommended to change the User Name
and Password when you enter into the system for the first time.
Enter the configuration Interface and on the left hand side of the page, you
could see 10 function menus including: Running Status, Wizard, General
Setting, DHCP Server, Advance Setting，Virtual Server, Security Setting,
Route Setting, System Tool, Logout. When you select the respective button,
more options would appear.
4.2 ISP Configuration
 This router supports 3 types of common used access modes to the
Internet (the default access mode is dynamic IP access):
PPPoE (ADSL): Using PPPoE dialing up to have Internet connection
Dynamic IP: Broadband network etc use DHCP services to appoint IP
addresses
11

TEI480T/490T/4000 Enterprise & Net-bar Level Router
Fixed IP: Ethernet broadband Access, ISP supports fixed IP address
4.2.1 Wizard
Please single click the “Next” button in Administrator Mode Interface and
enter in to the Interface for access mode selection.
As the figure below, 3 types of common used access modes to Internet are
displayed, please select according to your requirement:
4.2.1.1 PPPoE (ADSL)
If you are connecting to the Internet through “ADSL Virtual Dial-up (PPPoE)”,
please just enter the User Name and Password which is provided by the
ISP into the “Wizard ADSL” dialogue box.
4.2.1.2 Dynamic IP
If you are using “Dynamic IP” to have access to the Internet, you are able to
obtain dynamic IP address from the ISP to have access to the Internet and
do not need to have other configuration. Please just click “Next” and “save”.
12

TEI480T/490T/4000 Enterprise & Net-bar Level Router
4.2.1.3 Static IP
If you are using “Static IP” to have access to the Internet, please input the IP
Address, Sub-net mask, Gateway, DNS and secondary DNS, after this,
please click “Next” to save.
After configuration, please go to “Running Status”>”WAN Status” to check
the configuration that you have set. And by clicking the “disconnect” button,
you are able to disconnect the Internet connectivity manually, and when you
press the “connect” button, you are able to establish the Internet
connectivity again.
13

TEI480T/490T/4000 Enterprise & Net-bar Level Router
4.3 Configuration
4.3.1 Start and Log In
 After staring and Logging in successfully, the browser would display
the Interface for administrator’s mode.
 In the menu on the left hand side, there are ten buttons including
Running Status, Wizard, General Setting, DHCP Server, Advance
Setting, Virtual Server, Security Setting, Route Setting, System Tool,
and Logout. Single click a certain button and you are able to have the
respective function configuration.
 We would give detail introduction to the function of each menu.
4.3.2 Running Status
a. WAN Status
14

TEI480T/490T/4000 Enterprise & Net-bar Level Router
The connectivity status, WAN IP, Subnet Mask, Gateway, DNS,
Secondary DNS, Link Type of the router are displayed here.
b. LAN Status
The basic information of IP address, Subnet mask, DHCP Server, NAT,
Firewall are displayed here.
c. The Running Status ，Client Count，Firmware Version etc are displayed
here.
4.3.3 General Setting
Under “General Setting”, you could find 5 sub-items including LAN Setting,
WAN Setting, MAC Clone, DNS Server, and Access Limit. Please single
click a certain sub-item and you would be able to have respective function
configuration. We would give brief introduction as follows:
4.3.3.1 LAN Setting
 IP Address: This refers to the IP address of the router on the LAN.
Default IP address is 192.168.0.1, you can change this according to
your requirement.
 Netmask: This refers to the SubNet Mask of the router on the LAN, you
can input it manually.
15

TEI480T/490T/4000 Enterprise & Net-bar Level Router
16
Notice: If you change this IP address, you are required to use the new
IP address to log in to the WEB Management Interface, and in order to have
successful access to the Internet, default Gateway of all the computers
under this router are required to set as this IP address.
4.3.3.2 WAN Setting
First, please select the WAN access type, which means your way of
connecting to the Internet. The default mode of connecting to the Internet is
“Dynamic IP”
a. Dynamic IP: If you are having access to the Internet through dynamic
IP, you are able to obtain IP address from the ISP automatically.
b. Static IP: IF you are having access to the Internet through static IP,
you should have the fixed IP address which is provided by your ISP.
c. ADSL: If you are having access to the Internet through ADSL virtual
dialing up. In this page, you are able to change and configure the
following items:
 User Name：This refers to your User Name, please input the User
Name which is provided by your ISP.
 Password：Please input the Password which is provided by your ISP, if
you are not clear of these information, please contact your ISP and
require them to offer to you.
 Service：Input the Service which is provided by your ISP. (Optional)
 MTU: the default value is 1492, you can change according to your
requirement.

TEI480T/490T/4000 Enterprise & Net-bar Level Router
 Connecting automatically：This enables you to connect automatically
after starting the router or being disconnected.
 Connecting manually：This enables the user to connect manually.
 Connecting if needed：To set up connection automatically when data
visiting exists.
 Connecting automatically in period of time：To set up connection at
fixed time period
4.3.3.3 MAC Clone
Selecting this enables you to clone the MAC address of the computer being
used by the administrator to the MAC address in the WAN port. (You could
also change the MAC address manually.)
4.3.3.4 DNS Server
 DNS server address: Please input the DNS server address provided
by ISP. Please contact your ISP for this information if you are not clear.
 Secondary DNS: Optional item, if your ISP provides you with two DNS
servers, then you could input the IP address of another DNS server
17

TEI480T/490T/4000 Enterprise & Net-bar Level Router
here.
Notice: The main function of DNS is to translate the URL that we enter
into IP address.
4.3.3.5 Access Limit
In order to enhance the security of the router, you are able to set an IP
address and change the port of the host which can access to the web
management interface.
Notice: After setting the IP address, computers with other IP addresses
are not able to log in the WEB Management Interface of the router. After
changing the port through which the host is entitled to have access to the
management interface of the router, you are required to restart the router.
4.3.4 DHCP Server
In DHCP server, you can see “LAN DHCP Server” and “DHCP Client List”.
We would have detail descriptions on these two functions as follows:
4.3.4.1 LAN DHCP Server
18

TEI480T/490T/4000 Enterprise & Net-bar Level Router
In order to use the DHCP server function, you should have the following
configuration:
 Enable DHCP server
 Start IP Address of IP Pool：The starting IP address which is appointed
by the DHCP server automatically.
 End IP Address of IP Pool: The ending IP address which is appointed
by the DHCP server automatically
 Lease Time: The entitled time for each client to use the IP addressed
which it obtains.
Notice: In order to use the DHCP server function of this router, the
TCP/IP protocol of the computers under the LAN should be set as
“Auto-Obtain IP Address”
4.3.4.2 DHCP Client List
 The name of the host, IP address, MAC Address, Remaining Time and
Static are displayed in DHCP Client List.
 The name of the host: the name of the host
 IP Address: the IP address which is applied by the client
 MAC Address: the MAC Address of the computer which applies the IP
address successfully
19