Tenda TES70 Series User manual

1

i
Copyright Statement
© 2022 Shenzhen Tenda Technology Co., Ltd. All rights reserved.
is a registered trademark legally held by Shenzhen Tenda Technology Co., Ltd. Other
brand and product names mentioned herein are trademarks or registered trademarks of their
respective holders. Copyright of the whole product as integration, including its accessories and
software, belongs to Shenzhen Tenda Technology Co., Ltd. No part of this publication can be
reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language
in any form or by any means without the prior written permission of Shenzhen Tenda Technology
Co., Ltd.
Disclaimer
Pictures, images and product specifications herein are for references only. To improve internal
design, operational function, and/or reliability, Tenda reserves the right to make changes to the
products without obligation to notify any person or organization of such revisions or changes.
Tenda does not assume any liability that may occur due to the use or application of the product
described herein. Every effort has been made in the preparation of this document to ensure
accuracy of the contents, but all statements, information and recommendations in this document
do not constitute a warranty of any kind, express or implied.

ii
Preface
Thank you for choosing Tenda!
This manual walks you through the product features, hardware specifications, networking
application and system management modes on the TES70 Series GPON OLT. All the figures herein,
unless other specified, are taken from TES7008. Refer to the actual conditions.
Audience
This guide is intended for network planning engineer, field maintenance engineer, system
maintenance engineer and data configuration engineer.
Conventions
The symbol that may be found in this document is defined as follows.
Symbol
Meaning
This format is used to supplement or explain relevant operations.
For more documents
Search target product models on our official website www.tendacn.com to obtain the latest
product documents.

iii
The related documents are listed as below.
Document
Description
Quick Start Guide
It introduces the login and service configurations of the OLT device.
Quick Installation Guide
It introduces how to install the OLT device quickly, including pre-installation
preparation, hardware installation, OLT default configuration, and so on.
User Manual
It introduces the basic information of the OLT device, including product features,
hardware structure, network application, system management, and so on.
User Guide for Web
Management
It introduces how to set up more functions of the OLT device for more
requirements, including all functions on the web UI.
User Guide for EMS
Management
It introduces all functions on the EMS network management system of the OLT
device.
Tenda Lightning
Protection Guide
It introduces device lighting protection, including lightning protection terminology
and basic knowledge, lightning protection guide of devices, lightning arrester
installation.
Technical support
Contact us if you need more help. We will be glad to assist you as soon as possible.
Email address: su[email protected]
Website: www.tendacn.com
Revision history
Tenda is constantly searching for ways to improve its products and documentation. The following
table indicates any changes that might have been made since the manual was released.
Version
Date
Description
V1.0
2022-12-02
Original publication

iv
Contents
1Product positioning and features .........................................................................................1
1.1 Product positioning.................................................................................................................1
1.2 Functions and features ...........................................................................................................2
1.2.1 Various port types ..........................................................................................................2
1.2.2 High density and fully non-blocking design ...................................................................2
1.2.3 Flexible networking method ..........................................................................................3
1.2.4 Powerful GPON access capability...................................................................................3
1.2.5 Complete multicast function..........................................................................................3
1.2.6 Powerful QoS capability .................................................................................................4
1.2.7 Powerful VLAN function.................................................................................................5
1.2.8 Safety and reliability design ...........................................................................................5
1.2.9 Good maintenance and management function.............................................................7
2Hardware specifications.......................................................................................................8
2.1 Appearance.............................................................................................................................8
2.1.1 Front panel .....................................................................................................................8
Figure 2-1 TES7004 front panel appearance...........................................................................8
Figure 2-2 TES7008 front panel appearance...........................................................................8
Figure 2-3 TES7016 front panel appearance...........................................................................8
2.1.2 Back panel ......................................................................................................................9
Figure 2-4 TES7004/7008/7016 back panel appearance (dual AC as an example) ................9
2.2 LED indicators........................................................................................................................10
2.3 Ports......................................................................................................................................12
2.4 Basic parameters...................................................................................................................13
3Networking application .....................................................................................................14

v
3.1 Networking description ........................................................................................................14
Figure 3-1 TES70 series networking topology.......................................................................14
3.2 Networking features .............................................................................................................15
3.3 Networking suggestions........................................................................................................15
4System management modes..............................................................................................16
4.1 EMS network management ..................................................................................................17
Figure 4-1 EMS network management .................................................................................17
4.2 Web network management..................................................................................................18
Figure 4-2 Web network management.................................................................................18
5Technichal specifications and standards .............................................................................19
5.1 Port specifications.................................................................................................................19
5.1.1 GPON ports...................................................................................................................19
5.1.2 SFP Ethernet ports........................................................................................................21
5.1.3 RJ-45 Ethernet ports.....................................................................................................22
5.1.4 Debug ports..................................................................................................................22
5.2 Functions specifications........................................................................................................23
5.3 Protocols and standards........................................................................................................25

Document version: V1.0
1
1 Product positioning and
features
This chapter introduces the application range, functions and features of TES70 series GPON
products, including:
◼Product positioning
◼Functions and features
1.1 Product positioning
◼Positioning of TES70 series devices in the network
TES70 series optical access devices are FTTx carrier-grade GPON OLT devices independently
developed by Shenzhen Tenda Technology Co., Ltd. The devices comply with the international
standard ITU-T G.984.x, and GB/T 33845-2017 Technical requirements for access
network—Gigabit-capable passive optical network (GPON), which can provide users with access to
various services such as broadband, IPTV, CATV, and voice.
−Can be used as Optical Line Terminal (OLT) devices in GPON system, and used in
conjunction with Optical Network Termination/Optical Network Unit (ONT/ONU)
terminal devices
−Meet various networking requirements such as Fiber to the Home (FTTH), Fiber to the
Building (FTTB), base station transmission, and IP private line interconnection
◼Positioning of TES70 series devices in the market
−Satisfy small and medium-sized ISP groups and solve the interconnection of ONTs of
different manufacturers
−Plug-and-play without configuration, guided personalized configuration, easy to
maintain

Document version: V1.0
2
1.2 Functions and features
1.2.1 Various port types
TES70 series devices provide various types of network ports, service ports and maintenance ports
to adapt to different networking environments.
TES70 series devices provide up to two 10-gigabit uplink ports and six GE uplink ports, providing
10-gigabit uplink transmission for GPON systems.
TES70 series devices port description
Type
Description
Uplink port
10 GE port
Provide 10-gigabit Ethernet uplink port
GE port
Provide gigabit Ethernet uplink port
User port
GPON port
Provide GPON user port
Management
port
Console port
Meet CLI management requirements
Type-C port
Meet CLI management requirements (mutually exclusive with console port)
NMS
management
port
Meet GUI outband management requirements
10 GE/GE
port
Meet the GUI inband management requirements
1.2.2 High density and fully non-blocking design
TES70 series devices are 1U standard box-type devices with compact structure, which achieves
high integration in the industry.
−TES7004 integrates 4 PON ports, which can connect to 512 ONTs (1:128 branch ratio).
−TES7008 integrates 8 PON ports, which can connect to 1024 ONTs (1:128 branch ratio).
−TES7016 integrates 16 PON ports, which can connect to 2048 ONTs (1:128 branch
ratio).

Document version: V1.0
3
1.2.3 Flexible networking method
◼Triple-play solution
The FTTx system adopts wavelength division multiplexing technology. By adding a combiner to the
external of the TES70 series devices, CATV signal and user's data service and voice service are
transmitted in the same optical fiber, realizing the three service integration in one network.
◼Point-to-multipoint optical access solution
The TES70 series devices are connected to the terminals in users’ home through optical fiber,
providing users with high-speed data Internet access and multicast IPTV services.
1.2.4 Powerful GPON access capability
As a multi-service access platform, TES7004/7008/7016 can provide multiple access modes and
support multiple networking modes to meet the networking requirements of users in different
environments and services.
−Support GPON function specified by ITU-T G.988/ITU-T G.984 standard.
−Provide data and video services by using a single optical fiber to meet the individual
needs of users.
−Provide large-capacity GPON transmission bandwidth. Uplink rate ≥ 1 Gbit/s; Downlink
rate ≥ 2.2 Gbit/s
−GPON system adopts passive optical transmission technology, and the optical path
separation adopts the way of Point to Multiple Point (P2MP).
−It has a split ratio of 1:128, thereby increasing capacity, saving fiber resources, and
facilitating network expansion.
−Support Dynamic Bandwidth Allocation (DBA) algorithm: The minimum bandwidth
allocation granularity of DBA is not greater than 512 Kbit/s. The configurable minimum
bandwidth of DBA is not greater than 256 Kbit/s. The accuracy of DBA is greater than
+5 %.
−Support up to 20 km long-distance transmission.
−Support multiple types of ONTs.
1.2.5 Complete multicast function
TES70 series devices are equipped with the structural characteristics of PON network
Point-to-Multi-Point (PTMP), which is the best access structure for multicast services. With the
multicast function, it is convenient to provide users with some new value-added services, including
live broadcast, internet radio, IPTV, telemedicine, distance education, real-time video conferencing
and other internet information services. TES70 series devices support the following multicast
functions.

Document version: V1.0
4
◼Multicast protocol
−Support Internet Group Management Protocol (IGMP) V2.
−Support IGMP Proxy and IGMP Snooping.
◼Multicast service
−A device supports up to 2,000 multicast groups.
−Support flexible and convenient channel management function.
−You can set the maximum daily preview times as needed.
−Support audience rating statistics function.
−Support IGMP pre-join function and fast-leave function.
−Equipped with IGMP high-performance processing capability.
−Support program and user management based on multicast VLAN.
◼User management
Various multicast user authentication modes to meet the needs of different multicast operations.
1.2.6 Powerful QoS capability
With powerful QoS capability, TES70 series devices provide a basis for the development of various
service management.
−Support end-to-end network-wide QoS solutions.
−Support policies such as packet filtering, redirection, flow mirroring, traffic statistics,
traffic monitoring, port queue scheduling, port rate limit, priority policy, and VLAN
conversion based on Ethernet data flow on the uplink port.
−Support packet classification and filtering based on source MAC address, destination
MAC address, Ethernet type, VLAN, CoS, source IP address, destination IP address, IP
port, and protocol type on the uplink port.
−Support bandwidth control function on the GPON port, the bandwidth control
granularity is 64 Kbit/s.
−Support three queue schedule algorithms: SP, WRR and SP + WRR queue schedule
algorithms. Each port supports 4 priority queues.

Document version: V1.0
5
1.2.7 Powerful VLAN function
With powerful VLAN function, TES70 series devices enhance the manageability and security of the
network, and realize service isolation and user isolation. TES70 series devices support the following
VLAN functions.
−Support port-based VLAN.
−Support 4 K VLANs based on IEEE 802.1q.
−Support QinQ VLAN (also named Double VLAN). The outer layer Service-VLAN can be
set based on source MAC address, destination MAC address, Ethernet type, VLAN ID,
CoS, source IP address, destination IP address, ToS, protocol type, source port number,
destination port number and so on. Support CoS copy, and the CoS of the inner
Customer-VLAN can be copied to the outer service-VLAN.
−Support VLAN conversion function, can convert Customer-VLAN and CoS based on
source MAC address, destination MAC address, Ethernet type, VLAN ID, CoS, source IP
address, destination IP address, ToS, protocol type, source port number, destination
port number and so on.
1.2.8 Safety and reliability design
TES70 series devices considers system reliability index in system, hardware and software design,
which fully guarantees the normal operation of the device and the safety and reliability of user
services.
◼System design
−Support reporting the ONT’s MAC address to the EMS, and authenticating ONT’s
legitimacy based on ONT's MAC address.
−Support 80 QoS/ACL rules.
−Support packet filtering function, provide illegal frame filtering based on source MAC
address, destination MAC address, source IP address, destination IP address, port
number, Ethernet type, protocol type, VLAN, and VLAN range to restrict illegal users
from accessing the internet.
−Support limiting the number of users connected to each ONT port.
−Support limiting the number of multicast groups each ONT port joins.
−Support port binding function to ensure the legitimacy of access users.
−Support broadcast storm suppression function.
−Support DHCP Option82 and ISP can customize user access identification.
−It can prevent DoS attacks and improve the anti-attack performance of the system.
−To ensure the operation security of the EMS, both the graphical EMS and the
command line can provide several user levels with different operation permissions.

Document version: V1.0
6
◼Hardware design
−Redundant design for the communication system to provide outband communication
channels for inter-board communication.
−Support dual power supply redundancy.
◼Software design
−Following the idea of modularization and platformization, the design of each software
module is based on loose coupling mechanism.
−Adopt advanced design methods such as object-oriented, fault-tolerant,
error-correcting, and automatic recovery.
−Implement Capability Maturity Model (CMM) management.
−Support software online upgrade.
◼Power reliability
−Redundant design for power supply, TES70 series support 2 power supplies.
−The power board is equipped with a protection circuit to prevent service interruption
when the single-board power supply is faulty.
−Support input/output current limiting protection.
◼Heat dissipation reliability
−The cooling system provides redundant design to ensure normal system services when
a single fan fails.
−Support intelligent fan speed control function.
−The fan provides an alarm interface for t measuring the switch value of optical coupler
isolation and report fault information.

Document version: V1.0
7
1.2.9 Good maintenance and management function
TES70 series devices support good maintenance, management and monitoring functions, which is
convenient for daily management and fault diagnosis.
◼Diversified maintenance methods
−Support local maintenance and remote maintenance.
−Support command line, EMS network management, and web maintenance modes,
among which EMS network management and web maintenance support inband and
outband modes.
−Support Simple Network Management Protocol (SNMP), which can realize unified and
centralized management of OLT and ONT devices.
−Support web management, which can realize the basic configuration management of
OLT and ONT devices on the simple and easy-to-operate interface.
◼Terminal management
−Support GPON terminal management function.
−Support the offline configuration of the ONT by the OLT, and automatically configure
the ONT data during ONT registration, facilitating service provisioning.
−Support the reporting of alarm information to help users determine the cause and
solution of the alarm.
−Provide performance monitoring and testing of optical modules.
◼Security Authentication Management
Provide diversified authentication management methods to meet different operation
and maintenance requirements. It supports the assignment and management of
multiple management domains and operation permissions.
◼Software upgrade
Both TES70 series devices and ONT software support remote and online upgrade.
◼Performance statistics function
Provide performance data collection, query and analysis functions.

Document version: V1.0
8
2 Hardware specifications
The appearances of different models may differ. Refer to the actual product.
2.1 Appearance
2.1.1 Front panel
Figure 2-1 TES7004 front panel appearance
Figure 2-2 TES7008 front panel appearance
Figure 2-3 TES7016 front panel appearance

Document version: V1.0
9
2.1.2 Back panel
Figure 2-4 TES7004/7008/7016 back panel appearance (dual AC as an example)

Document version: V1.0
10
2.2 LED indicators
TES70 series device LED status description
LED Indicator Type
Status
Description
ACT (System status
indicator)
Solid green
System running properly
Slowly blinking
green
System initializing, or software starting but master-slave
communication state is not established
Fast blinking green
System receiving configuration commands, or establishing
master-slave communication state
Off
System powered off or software not started
ALM (Alarm
indicator)
Solid red
System alarms occurred
Off
No system alarms
NMS
(Management port
indicator)
Yellow
Indicates that port rate is 100 M.
Blinking indicates that management port is transmitting or
receiving data.
Green
Indicates that port rate is 1000 M.
Blinking indicates that management port is transmitting or
receiving data.
Off
Management port disconnected or connect improperly
PWR1/PWR2
(Power supply
indicator)
Solid green
Normal power input/output
Off
No power supply or abnormal power input/output
TES7004 PON 1-4
TES7008 PON1-8
TES7016 PON1-16
(PON port
indicator)
Solid on
ONT connected to the PON port
Off
No ONT connected to the PON port

Document version: V1.0
11
LED Indicator Type
Status
Description
TES7004 UPLINK
XGE1-2
TES7008 UPLINK
XGE1-2
TES7016 UPLINK
XGE1-2, GE3-4
(Uplink port
indicator)
Solid on
Port connected
Fast blinking
Port transmitting or receiving data
Off
Port disconnected or connect improperly
TES7004 UPLINK
GE3-4
TES7008 UPLINK
GE3-4
TES7016 UPLINK
GE5-6
(Ethernet port
indicator)
Yellow
Indicates that port rate is 100 M.
Blinking indicates that management port is transmitting or
receiving data.
Green
Indicates that port rate is 1000 M.
Blinking indicates that management port is transmitting or
receiving data.
Off
Management port disconnected or connect improperly

Document version: V1.0
12
2.3 Ports
TES70 series device ports description
Type
TES7004
TES7008
TES7016
Uplink
port
SFP Port
2 * 10-gigabit ports
2 * 10-gigabit ports (or 2 *
10-gigabit ports +2 * gigabit
ports for customization)
2 * 10-gigabit ports +2 *
gigabit ports
RJ-45
Ethernet
Port
2 * gigabit ports
2 * gigabit ports (or 4 *
gigabit ports for
customization)
2 * gigabit ports
GPON port
4 * SFP ports
8 * SFP ports
16 * SFP ports
Console port
1 port that meets RS232 technical specifications
Type-C port
1 port that meets USB Type-C/ RS232 technical specifications
Outband
management
port
1 port that meets 10/100/1000 Base-TX technical specifications

Document version: V1.0
13
2.4 Basic parameters
TES70 series parameter description
Parameter
TES7004
TES7008
TES7016
Weight
2.7 kg
3 kg
4 kg
Rated power
consumption
≤ 30 W
≤ 40 W
≤ 75 W
Dimensions
(Length * width *
height)
440 mm * 240 mm* 44 mm
Working
environment
Environment temperature: -5 °C to 45 °C; environment humidity: 10 % to 90 %,
non-condensing
Storage
environment
Environment temperature: -40 °C to 85 °C; environment humidity: 10 % to 90 %,
non-condensing
Power supply
AC: 100 V to 240 V, 50/60 Hz
DC: -40 V to -72 V

Document version: V1.0
14
3 Networking application
This chapter introduces the networking status of TES70 series devices, including:
◼Networking description
◼Networking features
◼Networking suggestions
3.1 Networking description
TES70 series devices are suitable for the application of private ISP fiber access occasions, and are
usually placed in the central office. The networking topology of TES70 series devices is shown as
below.
Figure 3-1 TES70 series networking topology