Tenda TEG1016D User manual

Copyright Statement
is the registered trademark of Shenzhen Tenda Technology
Co., Ltd. Other trademarks or trade names mentioned herein are the
trademarks or registered trademarks of the company. Copyright of the whole
products as well as its accessories and softwares, belongs to Shenzhen
Tenda Technology Co., Ltd. Without the permission of Shenzhen Tenda
Technology Co., Ltd, any individual or party is not allowed to copy, plagiarize,
imitate or translate it into other languages.
All the photos and product specifications mentioned in this manual are for
references only. As to the upgrade of softwares and hardwares, there will be
changes. And if there are changes, Tenda is not responsible for informing in
advance. If you want to know more about our products information, please
visit our website at www.tenda.cn

1
Introduction
The TEG1016D/1024D Gigabit Ethernet Switch, a mini desktop switch, is
designed to resolve data transfer bottleneck in the enterprises and Internet
Cafe. It has 16/24 10/100/1000Mbps auto-negotiation Ethernet ports and
high-speed dynamic memory, supports auto MDI/MDI-X and
store-and-forward function to make sure the packet to be sent each port
effectively. “Plug and play” function helps you set up easily. In addition, the
Gigabit ports can be used as normal ports, as well as Uplink ports to connect
backbone network. You can replace the 10/100Mbps switch with the
TEG1016D/1024D to resolve the bottleneck issues of server terminal
connectivity, because the speed at each port can be up to 2000Mbps for
full-duplex mode. It’s the best choice for you to upgrade from the normal
10/100Mbps to 1000Mbps. Moreover, its easy setup and no network
management will benefit you a lot. So you can import this Gigabit Switch as
a prime switch to improve the speed between different departments and
servers.
Switch Features
zCompliant to the IEEE802.3, IEEE802.3u, IEEE802.3ab，IEEE802.x
Ethernet standards, and supports 10/100/1000Mbps transfer mode.
zSupports NWAY auto-negotiation function, auto-detect transfer data rate,

2
PnP, full-duplex, flow control, and can choose the best network connectivity
mode automatically to avoid the complex setting procedure.
zSupports auto MDI/MDIX function; predigest the network span and
maintenance.
zSupports IEEE802.3x flow control for full-duplex, and back pressure flow
control for half-duplex.
zAs high as 32/48Gbps backplane bandwidth; supports non-blocking
wire-speed forwarding.
zSupports store-and-forward switching method.
zInternal universal power supply.
zSupports MAC address auto-learning function, integrated 8K MAC
address table.
Checklist
Please check the articles carefully after you open the packing as below:
9One 16/24-Port Gigabit Ethernet switch
9Mounting ears, eight screws, four rubber feet
9One power cord
9This manual
If any of listed items are mismatched, missing or damaged, please contact
the Tenda reseller from whom you purchased for replacement immediately.

3
Front Panel and Rear Panel Specifications
The front panel of 16/24-Port Gigabit Ethernet Switch includes 16/24
1000Mbps RJ-45 ports in the right side and LED indicators in the left side.
Each 1000Mbps port has 1 LINK/ACT indicator, 1 1000Mbps indicator; 1
power indicator in the front panel.
Front panel view of the Switch
The rear panel has 1 AC power port, used for AC power input.
Rear panel view of the Switch
LED Indicator Specifications
The LED indicators of the Switch include Power, Link/ACT and
10/100/1000Mbps indicators. You can see their operating situation through
these LED indicators.

4
LED indicators
The following chart shows the LED indicators of the Switch along with
explanation of each indicator.
LED
Indicators Colors Status Description
Green Lit up
This indicator lights
when the
Switch turns on.
Power
— No lit
If this indicator is not
lighting, please check
the AC power connector
to ensure proper
connectivity of the power
cable and the Switch.
Green Lit up
The other devices
connect to the port of the
switch.
LINK/
ACT
Green Flashing The port is transmitting
or receiving datum.
1000Mbps Green Lit up
The Switch connects to
the other devices at
1000Mbps speed.

5
Remarks: 1000Mbps port may be flashing together with Link/Act when it
transfers datum.
Before Connecting to the Network
TEG1016D/1024D supports the desktop and rack-mountable installation.
Before connecting to the network, please pay attention to the following
instructions:
¾Don’t put heavy articles on the Switch.
¾Power sockets and equipments should be within 1.5 meters of the
Switch.
¾Check power supply to confirm the safe connection.
¾Make sure there’s adequate space for proper heat dissipation and
adequate ventilation around the Switch.
¾When installing the Switch on a level surface, attach the rubber feet to
the bottom of the device in case of being scratched or scratching other
surfaces.
Rack-mountable Installation
The TEG1016D/1024D Gigabit Ethernet Switch also supports rack-mount. If
you want to install the device in this way, please refer to the following
instructions to set up.

6
Setting up the Switch on a Rack
The 16/24-Port Gigabit Switch can easily be set up on a rack. Two mounting
ears are employed to stabilize the Switch. In order to view the LEDs, the
front panel exposed is needed. Please refer to the following illustration:
Setting up the Switch to a rack
1. Attach the ears to each side of the Switch, using the screw-holes located
on the side of the device.
2. Firmly attach the ears to the rack as the illustration. Please be careful
during the setup.

7
Attaching the Rubber Feet
Position and apply rubber feet to the underside of the TEG1016D/1024D
Gigabit Switch, using rubber feet provided.
Attaching the rubber feet
Switch to End Node
Use standard Ethernet cable to connect the Switch to end nodes as
described below. Switch ports will automatically adjust to the characteristics
(MDI-II/MDI-X, speed, duplex) of the device to which is connected.
Switch connecting to an end node

8
Please refer to the LED Indicator Specifications. The Link/Act LEDs for each
port lights green when the link is available.
Switch to Router or Switch
Connecting to another router or switch
Please refer to the LED Indicator Specifications. The Link/Act LEDs for each
port lights green when the link is available.

9
Technology Parameters
Features
Standards
IEEE802.3 10BASE-T Ethernet
IEEE802.3u 100BASE-TX/FX Fast
Ethernet
IEEE802.3 ab Gigabit Ethernet
IEEE802.x Flow Control supports for
Full Duplex
Protocol CSMA/CD
Topological Structure Star
Network Cables
10BASE-T:
Cat.3 UTP or above
100BASE-TX:
Cat.5 UTP /STP
1000Base-T: Cat.5 , Cat.5e or Cat.6
UTP/STP
Port Quantity 16/24 10/100/1000Mbps ports
Performance
Transmission Method Fast store-and-forward
MAC Address Table 8K
14880pps(10Mbps)per port
148800pps(100Mbps)per port
Packet Filtering/
Forwarding Rate 1488000pps(1000Mbps)per port
MAC Address Learning Self-learning, auto-aging.
Physical and Environmental
Power Internal universal power supply
AC INPUT AC100~240V, 50/60Hz
Power Consumption 15W/20W
Operating Temperature 0°C~40°C
Storage Temperature -10°C~70°C
Humidity 5%~95% RH (no condensing)
Dimensions
(L×W×H)
11.02in. ×7.09in. ×1.93in.
(280mm×180mm×44mm)
Weight TEG1016D:1.70Kg/
TEG1024D:1.81Kg