Tenda 3G611R+ User manual

Copyright Statement
is the registered trademark of Shenzhen
Tenda Technology Co., Ltd. All the products and product
names mentioned herein are the trademarks or
registered trademarks of their respective holders.
Copyright of the whole product as integration, including
its accessories and software, belongs to Shenzhen
Tenda Technology Co., Ltd. ithout the permission of
Shenzhen Tenda Technology Co., Ltd, any individual or
party is not allowed to copy, plagiarize, reproduce, or
translate it into other languages.
All the photos and product specifications mentioned in
this guide are for references only. Upgrades of software
and hardware may occur, and if there are changes,
Tenda is not responsible for notifying in advance. If you
would like to know more about our product information,
please visit our website at www.tenda.cn.

CONTENTS
CHAPTER 1 INTRODUCTION .......................... 1
1.1 PRODUCT FEATURES .................................... 2
1.2 PACKAGE CONTENTS .................................... 4
1.3 LED INDICATOR AND PORT DESCRIPTION ............. 4
CHAPTER 2 HARD ARE INSTALLATION .......... 8
2.1 HO TO INSTALL THE ROUTER ......................... 8
2.2 NET ORK APPLICATION PLAN ......................... 11
CHAPTER 3 HO TO LOGIN TO THE ROUTER . 12
3.1 HO TO SET THE NET ORK CONFIGURATIONS ....... 12
3.2 LOGIN TO THE ROUTER ............................... 16
CHAPTER 4 AN MEDIUM TYPE ................... 18
4.1 AN MEDIUM TYPE ................................. 18
CHAPTER 5 QUICK SETUP GUIDE ................. 20
5.1 SETUP IZARD ....................................... 20
CHAPTER 6 ADVANCED SETTINGS ............... 34
6.1 LAN SETTINGS ...................................... 34
6.2 AN SETTINGS ..................................... 35
6.3 MAC ADDRESS CLONE .............................. 40
6.4 DNS SETTINGS ...................................... 41
CHAPTER 7 IRELESS SETTING .................. 42

7.1 BASIC SETTINGS ...................................... 42
7.2 IRELESS SECURITY SETTING ........................ 45
7.3 ADVANCED SETTINGS ................................. 54
7.4 PS SETTINGS ...................................... 56
7.5 DS SETTINGS ..................................... 58
7.6 IRELESS ACCESS CONTROL ......................... 59
7.7 CONNECTION STATUS ................................. 60
CHAPTER 8: DHCP SERVER ......................... 61
8.1 DHCP SETTINGS .................................... 61
8.2 DHCP LIST AND BINDING ........................... 62
CHAPTER 9 VIRTUAL SERVER ...................... 63
9.1 SINGLE PORT FOR ARDING ......................... 63
9.2 PORT RANGE FOR ARDING ........................... 65
9.3 ALG SERVICE SETTINGS ............................. 67
9.4 DMZ SETTINGS ...................................... 69
9.5 UPNP SETTINGS .................................... 70
CHAPTER 10 TRAFFIC CONTROL .................. 70
10.1 TRAFFIC CONTROL .................................. 70
10.2 TRAFFIC STATISTICS ................................ 72
CHAPTER 11 3G AN TRAFFIC AND
CONNECTION TIMER .................................. 73
11.1 3G AN TRAFFIC ................................ 73
11.2 CONNECTION TIMER ................................. 74

CHAPTER12 URL MONITOR .......................... 75
12.1 URL MONITOR ..................................... 75
CHAPTER 13 SECURITY SETTINGS ............... 78
13.1 CLIENT FILTER SETTINGS ........................... 78
13.2 URL FILTER SETTINGS ............................. 79
13.3 MAC ADDRESS FILTER ............................. 81
13.4 PREVENT NET ORK ATTACK ......................... 82
13.5 REMOTE EB MANAGEMENT ........................ 83
13.6 LOCAL EB MANAGEMENT .......................... 84
13.7 AN PING ........................................ 85
CHAPTER 14 ROUTING SETTING .................. 86
14.1 ROUTING TABLE ..................................... 86
14.2 STATIC ROUTING .................................... 86
CHAPTER 15 SYSTEM TOOLS ....................... 87
15.1 TIME SETTINGS ..................................... 87
15.2 DDNS ............................................. 88
15.3 BACKUP/RESTORE SETTINGS ........................ 90
15.4 RESTORE TO FACTORY DEFAULT SETTING ........... 92
15.5 UPGRADE FIRM ARE ................................ 93
15.6 REBOOT THE ROUTER ............................... 93
15.7 PASS ORD CHANGE ................................. 94
15.8 SYSTEM LOG ........................................ 94
15.9 LOGOUT ............................................ 95
APPENDIX Ⅰ ： GLOSSARY ............................. 96

APPENDIX : TROUBLESHOOTINGⅡ .............. 100
APPENDIX REGULATORY INFORMATIONⅢ . . 106

Chapter 1 Introduction
Thank you for purchasing Tenda 3G611R+ /
3G622R+11N ireless Router!
3G611R+ /3G622R+ is a high speed 3G 11N ireless
Router, which complies with the latest IEEE802.11n
and IEEE802.11b/g standards. It includes ireless AP,
Router, 4-Port Switch, and Firewall in one, and
basically provides three ways to access the Internet
sharing with other computers. The first way is to share
3G Internet connection with all network users using a
3G USB modem card to connect the USB port of the
Router. It is especially suitable for the users who are
not convenient in using fixed broadband or those who
need to share the Internet movably.
The second way is to use the unique wireless AN
feature to access wireless broadband. hen wireless
broadband signals provided by ISP are not strong
enough in some i-Fi hot area, you can set the
wireless AN feature to amplify wireless signals and
share the Internet with other computers.
The third way is to connect the Router’s AN port with
the traditional DSL or Cable broadband line to access
the Internet. ith powerful compatibility, it can break
through some access restricted area to share the
Internet with multiple computers easily.
Besides those access ways, DS ( ireless

Distribution System) enables you to bridge other
wireless Routers and extend wireless coverage area.
Meanwhile, QoS bandwidth control is used to control
downloading speeds of the specific computers. Then,
the included “Setup izard” is developed by Tenda
especially for less IT-savvy users to install the device
within seconds.
In a word, 3G611R+/3G622R+ is your premier choice
to share the Internet via 3G, wireless broadband, and
wired broadband access ways.
1.1 Product Features
Includes ireless AP, Router, 4-Port Switch, and
Firewall in one
Supports PS ( i-Fi Protected Setup) encryption
method
Complies with IEEE 802.11n, IEEE 802.11g, IEEE
802.11b, IEEE 802.3 and IEEE 802.3u standards
Supports 64/128-bit EP, PA, PA2,
PA& PA2 encryption methods
Supports RTS/CTS protocol and data partitioning
function
Provides one 10/100Mbps Auto-Negotiation
Ethernet AN port
Provides four 10/100Mbps Auto-Negotiation
Ethernet LAN ports
Provides one USB 2.0 port for 3G modem card
connection

Supports xDSL/Cable MODEM, static and dynamic
IP in community networking
Supports remote/local eb management
Supports MM to better smooth your voice and
video
Supports wireless Roaming technology for high-
efficient wireless connections
Supports SSID stealth mode and access control
based over MAC address (up to 30 entries)
Supports Auto MDI/MDIX
Provides syslog to record the status of the Router
Supports auto negotiation/manual mode for
802.11b/802.11g/802.11n
Supports UPnP and DDNS
Supports Firefox 1.0, IE5.5 or above
Supports LAN access control over Internet
connection
Supports SNTP
Supports virtual server, DMZ host
Built-in firewall for hacker’s attack prevention
Supports auto wireless channel selection
Supports DS wireless network extension
Supports URL Monitor
Supports QoS function

1.2 Package Contents
Please unpack the box and check the following items:
One 3G611R+/3G622R+ 11N ireless
Router
One Quick Installation Guide
One Power Adapter
One CD-ROM
If any of the listed items are missing or damaged,
please contact the Tenda reseller from whom you
purchased for replacement immediately.
NOTE: The difference between 3G611R+ and
3G622R+ is that 3G611R+ supports receiving and
sending rate up to 150Mbps, while 3G622R+ supports
receiving and sending rate up to 300Mbps.In this user
guide we take 3G611R+ as an example.
1.3 LED Indicator and Port Description
Front Panel and LED Indicator Show

LED indicator description on front panel: (from R to L)
POWER
hen turns green, Always ON indicates the power
connects well.
WPS
hen blinking, it indicates the device is
negotiating with client in PS mode.
SYS
hen turns green, blinking indicates the system
runs well.
USB
hen turns green, Always ON indicates the USB
port is connected well; Blinking indicates it is
transmitting or receiving data packets.
WLAN
ireless signal LED indicator. hen turns green,
blinking indicates the wireless function is enabled.
WAN
ide area network LED indicator. Always ON
indicates it is connected with Ethernet device;
Blinking indicates it is transmitting data packets.
LAN (4, ,2,1)
ired local network LED indicator. Always ON
indicates it is connected with Ethernet device;
Blinking indicates the device is transmitting data
packets.

Back Panel Show：
Rear Panel：（From L to R）
POWER
The port is for power adapter connection.
RESET
The system reset button. Press this button for 7
seconds, the settings configured in this device will
be deleted and it will restore the settings to the
default one.
USB：
The USB2.0 port provided for 3G USB modem
card to connect the Internet.
WAN
The 100Mbps Ethernet port can be connected
with MODEM, Switch, Router and other Ethernet

devices. It is always connected with DSL Modem,
Cable Modem, or direct Internet line provided by
ISP to access the Internet.
LAN (4, , 2, 1)
4 10/100Mbps Ethernet ports can be connected
with Ethernet switch, Ethernet router and NIC
card.
WPS
i-Fi Protected Setup button, Press it for 1
second, the PS feature will be enabled and PS
indicator will be shown blinking.

Chapter 2 Hardware Installation
2.1 How to Install the Router
After you unpack the box, please follow the steps
below to connect the device. For better wireless
performance, please put the device in the middle of
wireless coverage area.
1. Please use the included power adapter to power on
the Router. (IMPORTANT: Use of an unmatched power
adapter could cause damage and void the warranty for
this product.)
2. Please connect the LAN port of the Router to the
network adapter of your computer with a cable.

3. Connection between the Router and Network
A. If you have a 3G USB modem card, please connect
it to the Router's USB port to share 3G network.
B. If you are provided the wired broadband by your
ISP to access the Internet, please connect the
Router's AN port with the Internet access line.

C. If you are provided the wireless broadband by your
ISP to access the Internet or you want to amplify
wireless signals, please set the Router's wireless AN
feature.
4. Please insert the included CD-ROM into the CD-ROM
drive. You can run the “Setup izard” automatically or
click the “Tenda” button manually and then follow the
instructions to finish installation or enter the Router’s
eb-based utility to set the device. (For more details
please refer to chapter 3.)

2.2 Network Application Plan
Usually ireless LAN Network is deployed in a planned
environment where each access point is located in a
steady place with certain wireless coverage area for
communication service. Generally speaking, it is in the
center of the area to reduce “dead spot”.
1. Application Plan for 3G Network Connection
2. Application Plan for ired Broadband Connection

3. Application Plan for ireless Broadband Connection
Chapter 3 How to Login to the Router
The chapter mainly presents how to enter the Router’s
eb page. After you have finished the hardware
installation (Please refer to chapter2.), the following
steps will assist you to set the network configurations
for you computer.
3.1 How to Set the Network Configurations
1. On your computer desktop right click “My Network
Places” and select “Properties”.

2. Right click “Local Area Network Connection” and
select “Properties”.
3．Select “Internet Protocol (TCP/IP)” and click
“Properties”.