Tennant 613337 Product manual

613343
Rev. 00 (04-02)
13 Gallon
High Pressure
Carpet Cleaner
Model No.:
613337
613338 -PAC
TENNANT COMPANY
Commercial Products
12875 RANSOM STREET
HOLLAND MI 49424 U.S.A.
FAX: [phone]
1-616-786-2345
CUSTOMER SERVICE: 1-800-964-9644
1-616-786-2330
Operator and Parts Manual

13 Gallon High Pressure Carpet Cleaner (04-02)
2
Please fill out at time of installation for future reference.
Model No.-_______________________________________
Install. Date-______________________________________
Serial No.-________________________________________
OPERATION
This manual is furnished with each new model. It
provides necessary operation and maintenance
instructions and an illustrated parts list.
Read this manual completely and understand the
machine before operating or servicing it.
Use the illustrated Parts Lists to order parts. Before
ordering parts or supplies, be sure to have your
machine model number and serial number handy.
Parts and supplies may be ordered by phone or mail
from any authorized parts and service center,
distributor or from any of the manufacturer’s
subsidiaries.
This machine will provide excellent service. However,
the best results will be obtained at minimum costs if:
•The machine is operated with reasonable care.
•The machine is maintained regularly –per the
maintenance instructions provided.
•The machine is maintained with manufacturer
supplied or equivalent parts.
MACHINE DATA
©2000 Tennant Company Printed in U.S.A.
Castex is a registered United States trademark of Tennant Company
TABLE OF CONTENTS
SAFETY PRECAUTIONS.............................. 3
SAFETY LABELS......................................... 4
MACHINE COMPONENTS............................ 5
MACHINE SETUP......................................... 5
MACHINE OPERATION ................................ 6
DRAINING TANKS........................................ 7
FREEZE PROTECTION ................................ 7
MACHINE MAINTENANCE ........................... 8
STORING MACHINE..................................... 8
RECOMMENDED STOCK ITEMS.................. 8
TROUBLE SHOOTING.................................. 9
SPECIFICATIONS ........................................ 10
ELECTRICAL DIAGRAM .............................. 11
PARTS LIST................................................. 12
OPTIONS ..................................................... 17

13 Gallon High Pressure Carpet Cleaner (04-02) 3
OPERATION
SAFETY PRECAUTIONS
This machine is intended for commercial use. It is
designed to clean carpet and upholstery in a indoor
environment and is not constructed for any other use.
Use only recommended cleaning solutions and
accessory tools.
All operators must read, understand and practice the
following safety precautions.
The following safety alert symbols are used throughout
this manual as indicated in their description:
WARNING: To warn of hazards or unsafe
practices which could result in severe personal
injury or death.
FOR SAFETY: To identify actions which must be
followed for safe operation of equipment.
The following information signals potentially dangerous
conditions to the operator or equipment.
FOR SAFETY:
1. Do not operate machine:
–Unless trained and authorized.
–Unless operator manual is read and
understood.
–In flammable or explosive areas.
–With damaged cord or plug.
–If not in proper operating condition.
–Unless cord is properly grounded.
–In outdoor areas.
–In standing water.
–With the use of an extension cord.
2. Before operating machine:
–Make sure all safety devices are in place
and operate properly.
3. When using machine:
–Do not run machine over cord.
–Do not pull machine by plug or cord.
–Do not pull cord around sharp edges or
corners.
–Do not unplug by pulling on cord.
–Do not stretch cord.
–Do not handle plugs with wet hands.
–Keep cord away from heated surfaces.
–Report machine damage or faulty operation
immediately.
–Following mixing and handling instructions
on chemical containers.
4. Before leaving or servicing machine:
–Turn off machine.
–Unplug cord from wall outlet.
5. When servicing machine:
–Unplug cord from wall outlet.
–Avoid moving parts. Do not wear loose
jackets, shirts, or sleeves.
–Use manufacturer supplied or approved
replacement parts.
WARNING: Hazardous Voltage. Shock or
electrocution can result. Always unplug machine
before servicing.
WARNING: Flammable materials can cause
an explosion or fire. Do not use flammable
materials in tank(s).
WARNING: Flammable materials or reactive
metals can cause an explosion or fire. Do not pick
up.
GROUNDING INSTRUCTIONS
Machine must be grounded. If it should
malfunction or breakdown, grounding provides a
path of least resistance for electrical current to
reduce the risk of electrical shock. This machine is
equipped with a cord having an equipment-
grounding connector and grounding plug. The
plug must be plugged into an appropriate outlet
that is properly installed in accordance with all
local codes and ordinances. Do not remove
ground pin; if missing, replace plug before use.
GROUNDED OUTLET
(3 HOLE)
GROUNDING
PIN

13 Gallon High Pressure Carpet Cleaner (04-02)
4
OPERATION
SAFETY LABELS
The safety labels appear on the machine in the locations indicated. Replace labels if they become damaged or
illegible.
FOR SAFETY:
Read manual
before operating
machine.
FOR SAFETY LABEL-
Located on rear panel.
FLAMMABLE MATERIALS/
SPILLS LABEL-Located on
rear panel.
WARNING: Flammable materials
can cause explosion or fire. Do
not use flammable materials in
tank(s). Flammable materials or
reactive metals can cause
explosion or fire. Do not pick up.
HAZARDOUS VOLTAGE
LABEL-Located on rear
panel.
WARNING: Hazardous Voltage.
Shock or electrocution can
result. Always unplug machine
before servicing.

13 Gallon High Pressure Carpet Cleaner (04-02) 5
OPERATION
MACHINE COMPONENTS
1. Recovery Tank
2. Solution Tank (under lid)
3. Recovery Tank Lid
4. Solution Tank Lid
5. Vacuum Switches
6. Pump Switch
7. Power Cord Connect
8. Empty-Out Nozzle
9. Vacuum Hose Connector
10. Recovery Tank Drain
11. Latches
12. Push/Pull Handle
13. Solution Hose Connector
14. 254 mm (10”) Wheels, non-marking
MACHINE SETUP
1. Carefully check carton for signs of damage.
Report damages at once to carrier. The machine
is shipped fully assembled and is ready for use.
2. Connect hoses and tool to be used (Figure 1).
3. Using a clean bucket or hose, fill solution tank
with 49 liters (13 gallons) of hot water, 60°C
(140°F) maximum (Figure 2).
WARNING: Flammable materials can cause an
explosion or fire. Do not use flammable materials
in tank(s).
4. Add a recommended cleaning chemical.
FOR SAFETY: When using machine, follow
mixing and handling instructions on chemical
containers.
Fig. 1
Fig. 2
1
3
4
2
11
12
14
5
6
7
8
9
10
13

13 Gallon High Pressure Carpet Cleaner (04-02)
6
OPERATION
ATTENTION: If using powdered cleaning
chemicals, mix prior to adding.
NOTE: If desired, water alone achieves excellent
cleaning results.
5. Plug machine’s power cord into a grounded wall
outlet (Figure 3).
FOR SAFETY: Do not operate machine unless
cord is properly grounded.
FOR SAFETY: Do not operate machine with the
use of an extension cord.
6. Secure recovery and solution tank lids in place. It
is important to secure both lids whenever
vacuums are turned on.
MACHINE OPERATION
FOR SAFETY: Do not operate machine unless
operator manual is read and understood.
PRE-OPERATION
1. Vacuum carpet and remove other debris.
2. Inspect power cord for damage.
CLEANING CARPETS
1. Activate vacuum and pump switches (Figure 4).
2. Take carpet cleaning wand in hand and squeeze
valve trigger while moving the tool in short
forward and backward strokes over the carpet
(Figure 5).
WHILE OPERATING
1. Overlap each path by 50 mm (2 in).
Warning: Flammable materials or reactive
metals can cause an explosion or fire. Do not
pick up.
2. Periodically check for excessive foam buildup in
recovery tank. Use a recommended foam control
solution to prevent vacuum motor damage.
ATTENTION: Excessive foam buildup will not
activate the float shut-off screen.
3. To clean heavily soiled areas, repeat cleaning
path from a different direction.
4. Empty recovery tank every time water is added to
solution tank.
CLEANING WITH ACCESSORY TOOLS
1. Connect accessory tool hoses to the couplers at
the end of the hoses already attached to the
machine (Figure 6).
GROUNDED OUTLET
(3 hole)
GROUNDING
PIN Fig. 3
Fig. 4
Fig. 5
Fig. 6

13 Gallon High Pressure Carpet Cleaner (04-02) 7
OPERATION
2. Operate accessory tool as normal (Figure 7).
NOTE: Before cleaning upholstery, always check
cleaning instructions sewn in furniture by
manufacturer.
3. After cleaning, relieve water pressure from tool
before disconnecting hose. Squeeze trigger for
five seconds after turning switches off.
DRAINING TANKS
DRAINING RECOVERY TANK
1. Turn machine off and unplug power cord.
2. Insert supplied 45°elbow in drain valve. Place a
bucket below it and slowly pull up on the handle
(Figure 8).
3. Rinse tank with clean water at the end of the day.
DRAINING SOLUTION TANK
1. Remove empty-out nozzle from its storage
bracket (Figure 9) and attach to end of solution
hose.
2. Place empty-out nozzle over a bucket and turn on
pump until all the solution has been pumped from
solution tank.
3. Replace empty-out nozzle to its storage location.
FREEZE PROTECTION
1. After draining solution tank as described in steps
one and two in the previous section (DRAINING
SOLUTION TANK), place empty-out nozzle in
end of vacuum hose and seal with hand
(Figure 10).
2. Turn on vacuum and pump for 15 seconds. This
will fill the pump and hoses with air and prevent
freezing.
3. Replace empty-out nozzle to its storage place.
FIG. 7
FIG. 8
FIG 9
FIG. 10

13 Gallon High Pressure Carpet Cleaner (04-02)
8
OPERATION
MACHINE MAINTENANCE
To keep machine in good working condition, simply
follow machine’s daily, weekly and monthly
maintenance procedures.
FOR SAFETY: When servicing machine, unplug
cord from wall outlet.
DAILY MAINTENANCE
(Every 4 Hours of Operation)
1. Empty and rinse out recovery tank thoroughly.
2. Remove float shut-off screen from recovery tank
and clean (Figure 11).
3. When solution tank is empty, remove and clean
solution filter screen located in the bottom of the
solution tank.
4. Wipe off power cord and check for damage,
replace if necessary. Coil cord neatly after use.
5. Clean machine with an all purpose cleaner and
damp cloth.
WEEKLY MAINTENANCE
(Every 20 Hours of Operation)
1. Inspect vacuum hoses for holes and loose cuffs.
2. Inspect spray pattern for plugging. If plugged,
remove spray tips and soak them in acetic acid
solution for up to six hours. Do not use pointed
objects to unplug tips, damage will occur.
FOR SAFETY: When using machine, follow mixing
and handling instructions on chemical containers.
3. Inspect cord and cord grip for damage. Replace
immediately if damaged.
4. Lubricate metal shaft on recovery tank drain with
water resistant oil.
5. Lubricate female hose couplers with lightweight
oil.
MONTHLY MAINTENANCE
(Every 80 Hours of Operation)
1. Lubricate wheels with water resistant oil.
2. Inspect machine for water leaks and loose
hardware.
QUARTERLY MAINTENANCE
(Every 250 hours of Operation)
Check vacuum motor for carbon brush wear. Replace
brushes or motor if worn to a length of 10mm (0.38”)
or less.
STORING MACHINE
1. Before storing machine, be certain to drain and
rinse tanks of all water.
2. Store machine in a dry area in the upright position.
3. Unscrew recovery and solution tank lids to
promote air circulation.
ATTENTION: Do not expose to rain. Store
indoors.
ATTENTION: If storing machine in freezing
temperatures, be sure that machine and solution
system are completely drained and dry.
RECOMMENDED STOCK ITEMS
Refer to Parts List section for recommended stock
items. Stock items are clearly identified with a bullet
preceding the parts description. See example below:
REF PART # DESCRIPTION QTY.
1610470 NUT 1/4-20 NYLOK ZINK 3
2610471 WASHER 1/4 FLAT CP 6
3610579
•BLOWER 3STG 120V 5.7 COMP 1
4610487 GASKET BLOWER/ARLON 1/4" 1
FIG. 11

13 Gallon High Pressure Carpet Cleaner (04-02) 9
OPERATION
TROUBLE SHOOTING
PROBLEM CAUSE SOLUTION
Faulty switches or wiring. Contact Service Center.
Faulty power cord. Contact Service Center.
Machine does not operate.
Building circuit breaker tripped. Reset Breaker.
Faulty switch or wiring. Contact Service Center.
Faulty solution pump motor. Contact Service Center.
Faulty pump head. Contact Service Center.
Trigger on wand not pulled. Pull Solution Trigger.
Solution pump does not operate.
Quick couplers not fully engaged.Connect quick couplers.
Loose or broken wiring. Contact Service Center.
Faulty vacuum switch. Contact Service Center.
Defective vacuum motor. Contact Service Center.
Vacuum motor does not
operate.
Worn carbon brushes. Contact Service Center.
Recovery tank drain valve open. Close valve.
Vacuum or solution lids loose. Tighten both lids
Defective lid gasket(s). Replace gasket(s).
Clogged float shut-off screen. Remove recovery tank lid and clean
screen.
Loose vacuum hose connections. Secure cuffs to hose.
Poor solution pick-up.
Defective vacuum hose. Replace hose.
Plugged spray tips. Clean or replace tips.
Improper spray tip size or spray angle. Replace with proper tips.
Worn spray tips. Replace spray tips.
Solution tank low or empty. Refill solution tank.
Uneven or no spray.
Faulty solution pump. Contact Service Center.

13 Gallon High Pressure Carpet Cleaner (04-02)
10
OPERATION
SPECIFICATIONS
MACHINE DIMENSIONS
Model 13 GALLON HIGH PRESSURE CARPET CLEANER
LENGTH 711 mm (28 in)
WIDTH 450 mm (17.7 in)
HEIGHT 902 mm (35.5 in)
WEIGHT 50 Kg (110lbs)
SOLUTION TANK CAPACITY 49.2 L (13 gal)
RECOVERY TANK CAPACITY 56.7L (15 gal)
SOLUTION PUMP 120 V, 13.6 bar (200 psi), 1.6A
VACUUM MOTOR 2-@120 V, 9A, 1026 W
SEALED WATER LIFT 3810 mm (150 in)
TOTAL POWER CONSUMPTION 120v, 17 A, 2040 W
POWER CORD 7.6m (25 ft) 3/12
DECIBEL RATING 3 METERS (10 FT) FROM
MACHINE ON CARPET <69 db(A)
902 mm
(35.5 in)
450
mm
(17.7 in)
711 mm
(28 in)

13 Gallon High Pressure Carpet Cleaner (04-02) 11
ELECTRICAL DIAGRAM
120 V WIRING DIAGRAM

13 Gallon High Pressure Carpet Cleaner (04-02)
12
PARTS LIST
TANK GROUP

13 Gallon High Pressure Carpet Cleaner (04-02) 13
PARTS LIST
TANK GROUP
REF PART # DESCRIPTION QTY.
1610538 NOZZEL EMPTY OUT MALE 1
2610480 BUSHING HOLDER EMPTY-OUT 1
3610462 10-32 X 1 1/2 PHXZINC 2
4610519 BRACKET SF-09 HOLDER EDGE 1
5610527 PNL EDGE PROF 100 BLANK 1
6610475 3/8-16 X 4 HEX ZINC 1
7610476 WASHER 3/8 FLAT ZINC 3
8610528 LABEL "IMPRINT LIDS EDGE" 1
9610610 HNDL CASTEX EDGE 3 SWITCH & 1 FUSE 1
10 N/A DECAL 2
11 610457 10-32 X 5/16 PHXSS 6
12 610522 PLATE HANDLE SW COVR EDGE 1
13 610474 3/8-16 X 3 1/2 HEX ZINC 1
14 610539 •VALVE DUMP 1.5 W/PVC EXT 1
15 610537 •HOSE 2" VINYL X 2.25" 1
16 610484 CLAMP HOSE 2 1/4 # 32 2
17 610473 3/8-16 X 1 1/2 HEX ZINC 2
18 610520 BRACKET DUMP VAL MNT EDGE 1
19 610491 PLUG HOLE NYLON .562 2
20 610507 •LID DOME EDGE 2
21 610461 10-32 X 3/4 PHXSS 12
22 610488 •GASKET DOME LID 2
23 610540 FLANGE ASM-DOME LID GLUE 2
24 610453 8-32 X 1/2 PHXSS 12
25 610508 RING BLADDER EDGE 2
26 610455 NUT 8-32 HEX SS 8
27 610545 •BLADDER EDGE 3/4" BOT HOL 1
28 610582 •FILTER 3/8NPT 50 MESH 1
29 610586 BULKHEAD ADAPT3/8NPTX1/2N 1
30 610585 BLKHD 3/4FPT X 3/8MPT 2.9"L 1
31 610498 NUT BLKHD 3/4-16 X .843 X 2 1
32 610506 O-RING VITON 2-020 BLKHD 1
33 610515 •SWITCH SPST WATER RESIS 3
REF PART # DESCRIPTION QTY.
34 610463 NUT 10-32 HEX ZINC 2
35 610460 10-32 X 5/8 PHXSS 1
36 610482 CLAMP HOSE 1/4 # 4 1
37 610512 NUT NYLON BUSHING REL 1/2 1
38 610563 TIE WIRE NYLON #10 SCREW 1
39 610511 BUSHING RELIEF 1/2 NPT 1
40 610614 •HARNESS EDGE HNDL C1FPVV 1
41 610546 •CORD PIG TAIL EDGE COMP 1
42 610483 CLAMP HOSE 2" # 24 1
43 610534 •HOSE VAC 1.5" FLEX 31" 1
44 610509 NECK VAC FLTR EDGE ROTO 1
45 610464 NUT 10-32 NYLOK SS 12
46 610516 GUARD SPLASH INTAKE EDGE 1
47 610530 HOSE BARB ABS 1 1/2 CUT 1
48 610494 O-RING 1.76 X .187 1
49 610493 •FLOAT VAC SHUT OFF ROTO 1
50 610542 TANK DRILLED CASTEX BLADD 1
51 610490 LATCH SOFT DRAW BLACK 2
52 610478 WASHER 3/4 FLAT BLKHD CP 1
53 610479 NUT BULKHEAD 3/4-16 X .225 2
54 610605 TEE COMP 3/8X3/8X1/8 W1/4 1
55 610611 INTAKE AIR DUAL VAC EDGE 1
56 610467 1/4-20 X 1 HEX HD CP 3
57 610471 WASHER 1/4 FLAT CP 3
58 610587 COUP 1/8 NPT -4SAE 1
59 610589 COUP 3/8 NPT X -6 SAE 1
60 610510 CORD 25' 12/3SJT UG W/LCK 1
61 610599 FUSE HOLDER PNL MNT 1
62 610600 •FUSE 3 AMP 1
63 578729 DECAL READ MANUAL 1
64 630420 DECAL FLAMMMABLE MAT'L 1
65 610185 DECAL HAZARD UNPLUG 1
66 610458 10-32 X 7/16 PHXSS 1
•RECOMMENDED STOCK ITEMS

13 Gallon High Pressure Carpet Cleaner (04-02)
14
PARTS LIST
BASE GROUP

13 Gallon High Pressure Carpet Cleaner (04-02) 15
PARTS LIST
BASE GROUP
REF PART # DESCRIPTION QTY.
1610551 INSULATION BLOWERS 700 2
2610598 TIE WRAP 12" BLACK 2
3610470 NUT 1/4-20 NYLOK ZINK 13
4610471 WASHER 1/4 FLAT CP 14
5610468 1/4 x 3 HEX HD CP 1
6610472 WASHER 1/4 INT STAR 1
7610535 •HOSE 2" FLEX EXHAUST 10" 1
8610484 •CLAMP HOSE 2 1/4 # 32 4
9610549 •BLOWER 2STG 120V 5.7 COMP 2
10 610487 •GASKET BLOWER/ARLON 1/4" 2
11 610525 STANDOFF 5.7 EDGE 2.260" 6
12 610469 1/4-20 X 3 3/4 HEX HD CP 5
13 610504 CUFF 1 1/2SLIP X 1 1/4HO 1
14 610606 HOSE 1/4NPT X -4SAEFMLSVL 1
15 610596 VALVE PRESS RELIEF 200PSI 1
16 610592 NIPPLE 1/4" NPT CLOSE SS 1
17 610619 TEE STREET 1/4 NPT BRASS 1
18 610499 90 ELBOW 1/4" NPT 4
19 610593 NIPPLE 1/4 X 2" BRASS 1
20 610588 COUP 1/4 NPT X -6SAE 1
21 610590 90 ELBOW 1/4NPT 1
22 610607 HOSE 3/8GPH 1/4NPTX-6SAE 2
23 610616 •PMP PUMPTEC 200 W/PLG 120 1
24 610595 HOSE 1/4" PULSE W/SWVL 1
25 610618 90 ELBOW 1/4MPT X 1/4 MPT 1
26 610603 PLATE MUFFLER END EDGE 1
27 610451 6-32 X 1/2 PHXSS 8
28 610584 MUFFLER FOAM EDGE 1
29 610452 NUT 6-32 HEX SS 8
30 610601 BRACKET PT PUMP MNT EDGE 1
REF PART # DESCRIPTION QTY.
31 610580 NUT 1/4-20 HEX CP 4
32 610581 WASHER LOCK 1/4 4
33 610583 DAMPENER VIB 1X1MXM 1/420 4
34 610608 HOSE 2" FLEX EXH 6" 1
35 610602 PLATE VAC MNT SERIES W/QU 1
36 610460 10-32 X 5/8 PHXSS 3
37 610457 10-32 X 5/16 PHXSS 1
38 610489 GASKET VAC SEAL EDGE BASE 1
39 610466 1/4-20 X 3/4 HEX HD CP 12
40 610597 PMP MNT SILNCE BLCK ROTO 1
41 610612 MUFFLER EDGE ASM 1
42 610526 SPACER QUICK CONNECT 1
43 610514 CLAMP NYLON CABLE 1/4" 2
44 610456 NUT 8-32 NYLOK, ZINC 4
45 610454 8-32 X 3/4 PHX ZINC 4
46 610505 Q/C 1/4" PLUG BR SHUT OFF 1
47 610481 •CASTER 3 1/2 2
48 610609 BASE CASTEX DRILLED SERIE 1
49 610613 •HARNESS EDGE BASE C1FPVV 1
50 610513 CLAMP NYLON CABLE 3/16 9 2
51 610463 NUT 10-32 HEX ZINC 3
52 610518 AXIL ROD 1/2 EDGE 1
53 610477 WASHER 9/16 X 1 1/4 FLAT 4
54 610492 •WHEEL 10"-1/2BORE 2
55 610495 PUSHNUT FASTNER 1/2 CAP 2
56 610485 COTTER HAIRPIN 7/16-9/16 2
57 610517 AXIL ROD 1/2 EDGE ECONO 1
58 610293 VELCRO ONE WRAP STRAP 1/2" X 12" 1
59 610521 PIVOT TUBE EDGE 3.400" 2
•RECOMMENDED STOCK ITEMS

13 Gallon High Pressure Carpet Cleaner (04-02)
16
PARTS LIST
PUMP 200 PSI BREAKDOWN
REF# PART # DESCRIPTION QTY.
610616 PUMP PUMPTEC 200 W/PLUG 120 1
1610763 MOTOR, 200 PSI W/PLUG 120V 1
2610764 •VALVE & O-RING KIT, PMPTC 200 1
3610765 •PLUNGER & SEAL KIT, PMPTC 200 1
4610766 •CAM & BEARING KIT, PMPTC 200 1
•RECOMMENDED STOCK ITEMS
1
2
2
3
4

13 Gallon High Pressure Carpet Cleaner (04-02) 17
OPTIONS
FLOOR TOOL
REF PART # DESCRIPTION QTY.
610641 WAND & HOSE KIT HP-PX 1
610709 WAND, FLOORTOOL HP-PX COMP 1
1610624 GRIP, FLRTOOL 1 1/2 X 6 1
2610465 NUT, 10-32 NYLOK ZINK 2
3610628 HOE HANDLE,ECONO FLRTL 1
4610622 5/16-18 X 3/4 HEX CP 2
5610631 TRIGGER,COMP KNGSTN VALVE 1
6610625 45 ST ELBOW 1/4 NPT 1
7610502 NIPPLE, 1/4 NPT CLOSE BR 1
8610505 Q/C 1/4" PLUG BR SHUT OFF 1
9610621 10-32 X 1 3/8 PHX ZINC 1
10 610620 10-32 X 3/4 PHXZINC 1
11 610639 VALVE,KNSTN HP "S" BEND 1
REF PART # DESCRIPTION QTY.
12 610646 HOSE 1/4"SOL BLU X39.25DB 1
13 610629 "U"CLAMP,SUPP HOE HNDL EC 1
14 610645 WAND,"S" BEND FLOORTOOL 1
15 610623 NUT 5/16-18 NYLOCK, ZINC 2
16 610640 BODY, TEE JET 1/4 BRASS 2
17 610644 JET,110015 E TEE BRASS 2
18 610643 CAP NUT, TEE JET BRASS 2
19 610637 HOSE 1/4 SOL 25' NPT NO/QC 1
20 610638 Q/C 1/4" SOC BR SHUT OFF 2
21 610636 HOSE 1/4 SOL 25' W/QCEDGE 1
22 610634 HOSE, VAC 1 1/2 GREY 25' 1
23 610633 CUFF 1 1/2 SLIP 1 1/2 HOSE 2
24 610635 HOSE, VAC 1 1/2X25'W/1.5 CUFF 1
•
RECOMMENDED STOCK ITEMS

13 Gallon High Pressure Carpet Cleaner (04-02)
18
OPTIONS
HAND TOOL
REF PART # DESCRIPTION QTY.
610297 TOOL, UPHOLSTERY HP-PX
1610670 TOOL, HAND HP BRASS JET W/VLV & TRIG 1
1608891 TOOL, HAND W/O TRIGGER 1
2610654 6-32 X 1 PHXZINC 2
3610655 NUT, 6-32 HEX ZINC NYLOK 2
4610656 VALVE & TRIGGER ASM. COMP HP 1
5608897 CAP, SPRAY TIP HAND TOOL 1
6610657 JET, 6501 E TEE BRASS 1
7608900 SCREEN, HAND TOOL 1
8608895 NOZZLE, SPRAY HAND TOOL 1
9608894 BODY, VALVE HAND TOOL 1
REF PART # DESCRIPTION QTY.
10 608898 TRIGGER, HAND TOOL 1
11 610658 4-40 X 7/8 PHXZINC 1
12 610659 NUT, 4-40 HEX ZINC NYLOK 1
13 608892 SEAL, SOLUTION HOSE 1
14 610660 HOSE, 1/8BLK 16.5" ASM W/EXTRN CUFF 1
15 610661 ASM, 1 1/4"VAC GREY 12" W/ 1 1/4 CUFF 1
16 610662 HOSE, 1 1/4" VAC GREY LOOP 12"LONG 1
17 610669 CUFF, HOSE 1.5 X 1.25 GREY 1
18 610663 COUPLER, 1.5" VAC HOSE ALUM 1
19 610664 BUSHING 1/4 X 1/8 NPT BR 1
20 610505 Q/C 1/4" PLUG BR SHUT OFF 1