Tennant V-LWU-13 Product manual

Model Part No.:
1068028 –V-LWU-13 (120V)
V-LWU-13
Commercial Upright Vacuum Cleaner
Aspiradora Vertical de Uso Comercial
Aspirateur vertical à usage commercial
Operator and Parts Manual
Manual de operación y partes
Manuel d'utilisation et de pièces
EN
ES
FR
www.nobles.com
9009203
Rev. 00 (09-2011)
www.tennantco.com
®

2
GENERAL INDEX
CUSTOMER'S RECORD
This manual is furnished with each new upright vacuum
cleaner. It provides necessary operation, maintenance
instructions and parts list.
Read this manual completely and understand
the machine before operating or servicing it.
When ordering replacement parts use the Parts Lists
section in this manual. Before ordering parts or supplies,
be sure to have your machine model number and serial
number handy. Parts and supplies may be ordered online,
by phone, by fax or by mail or from any Tennant or Nobles
Authorized Service Center or Distributor.
UNCRATING MACHINE: Carefully check carton for signs
of damage. Report damages at once to carrier.
Tennant Company
PO Box 1452
Minneapolis, MN 55440 USA
Phone: [phone] or [phone]
www.tennantco.com
www.nobles.com
Specications and parts are subject to change without notice.
Original Instructions. Copyright © 2011 TENNANT Company.
All rights reserved.
PROTECT THE ENVIRONMENT
Please dispose of packaging materials
and old machine components in an
environmentally safe way according to
local waste disposal regulations.
Always remember to recycle.
The model and serial number of this product may be found on the back side of the unit. You should complete the en-
closed warranty card and mail it back to us as soon as possible for your protection. Also, note the model and serial num-
ber of your unit in the spaces provided below, and retain this book as a permanent record of your purchase.
Model Number: ________________________________________________________________________________________
Serial Number: _________________________________________________________________________________________
Date Purchased: _______________________________________________________________________________________
Your new vacuum cleaner is a product of high quality materials and superior workmanship. We urge you to read these
operating instructions carefully before you use this vacuum cleaner, in order to obtain the full performance and satisfac-
tion it can offer you.
Important Safety Instructions .............................................3
Grounding Instructions ........................................................4
Safety Label ........................................................................4
Parts Identification ..............................................................5
Replacement Bags and Belt ...............................................5
How to Assemble and Operate the Vacuum .......................6
How to Change the Vacuum Bag .......................................7
Edge Cleaning Feature ......………………..………………….7
Handle Adjustments .....……………………………………….7
Self-Adjusting Brush Head ..................................................8
How to Replace the Vacuum Belt........................................8
Circuit Breaker Protection ...................................................8
For Best Performance .........................................................9
Electrical Diagram ...............................................................9
Machine Specications .......................................................9
Recommended Spare Parts ................................................9
V-LWU-13 Parts Lists ........................................................26
Warranty .............................................................. Backcover

3
SAVE THESE INSTRUCTIONS
IMPORTANT SAFETY INSTRUCTIONS
This machine is intended for commercial use only. It is designed exclusively to pick up dirt, dry debris and dust in
an indoor environment and is not constructed for any other use. The pick up of any type of liquid or dangerous /
toxic materials is prohibited.
When using an electrical appliance, basic precautions should always be followed, including the following:
READ ALL INSTRUCTIONS BEFORE USING THIS APPLIANCE.
WARNING! To reduce the risk of re, electric shock, or injury:
1. Before you plug in your new vacuum cleaner, make sure the voltage indicated on the rating plate located on the back
of the vacuum cleaner is the same as your local supply.
2. Do not leave appliance unattended when plugged in. Unplug from outlet when not in use and before servicing.
3. Do not use with damaged cord or plug. If appliance is not working as it should, has been dropped, damaged, left out-
doors, or dropped into water, return it to a service center for repair.
4. Do not pull or carry by cord, use cord as handle, close a door on cord, or pull cord around sharp edges or corners. Do
not run appliance over cord. Keep cord away from heated surfaces.
5. Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord.
6. Do not handle plug or appliance with wet hands.
7. Turn off all controls before unplugging.
8. Do not attempt to service the unit while appliance is plugged in.
9. Connect to a properly grounded outlet only. See Grounding Instructions.
10. Do not operate machine with the use of an extension cord.
11. Do not use outdoors or on wet surfaces. Do not expose to rain/moisture. Store Indoors.
12. Do not put any object into openings. Do not use with any opening blocked, keep free of dust, lint, hair, and anything
that may reduce air flow.
13. Keep hair, loose clothing, fingers and all parts of body away from openings and moving parts.
14. Do not pick up anything that is burning or smoking, such as cigarettes, matches or hot ashes.
15. Do not use without vacuum bag and / or filters in place.
16. Use extra care when cleaning stairs.
17. Do not use to pick up flammable or combustible liquids such as gasoline or use in areas where they may be present.
18. Do not allow to be used as a toy. Close attention is necessary when used by or near children.
19. Use only as described in this manual. Use only manufacturer’s recommended attachments.
20. Do not operate machine unless mentally and physically capable of following machine instructions.
21. Keep children and unauthorized persons away from the machine when in use.

4
GROUNDING INSTRUCTIONS
SAFETY LABEL
This appliance must be grounded. If it should malfunction or break down, grounding provides a
path of least resistance for the electric current to reduce the risk of electric shock. This appliance
is equipped with a cord having an equipment-grounding conductor and grounding plug. The plug
must be plugged into an appropriate outlet that is properly installed and grounded in accordance
with all local codes and ordinances.
This appliance is for use on a nominal 120 volt
circuit and has a grounding attachment plug that
looks like the plug illustrated in (Fig. 1). Make
sure that the appliance is connected to an outlet
having the same conguration as the plug. No
adaptor should be used with this appliance.
WARNING – Improper connection of the
equipment- grounding conductor can result in
a risk of electric shock. Check with a qualied
electrician or service person if you are in doubt as
to whether the outlet is properly grounded. Do not
modify the plug provided with the appliance. If it
will not t the outlet, have a proper outlet installed
by a qualied electrician.
WARNING – the replacement or repair of damaged wiring should only be performed by a qualied
electrician or by a Tennant or Nobles Authorized Service Center or Distributor.
GROUNDING
PIN
GROUNDING
OUTLET
GROUNDED
OUTLET BOX
Fig. 1
The safety label appears on the bag in the location indicated.
Replace bag if it is missing or becomes damaged or illegible.

5
PARTS IDENTIFICATION
50 FT / 15 m
Power Cord
Circuit
Breaker
Ergonomic
Handle
Dual Speed
On/Off Switch
Bag
Compartment
Furniture
Guard
REPLACEMENT BAGS AND BELTS
• Genuine OEM Vacuum Bags
Part # 9009028 Paper Bag (6 per package)
Part # 9009005 HEPA Bag (6 per package)
• Genuine OEM Vacuum Belt
Part # 9009035 6 per package
MACHINE CARTON CONTENTS NOTE: Each machine is equipped with one extra vacuum bag and brush belt.

6
HOW TO ASSEMBLE AND OPERATE THE VACUUM
How to Attach the Handle to the Vacuum Cleaner
The vacuum cleaner and the handle are packed separately.
1. Release the handle bracket from the handle tube by removing the two screws. (Fig. 2) Save the screws.
2. Place handle onto the handle tube, aligning holes with pegs. (Fig. 3)
3. Place the handle bracket back into position. (Fig. 4)
4. Secure with two screws removed in step 1.
5. Thread cord through cord guides and proceed with wrapping the cord. (Fig. 5)
6. Wrap the cord clockwise around the top and bottom cord hooks. Fasten the plug to the wrapped cord using
the channel on the plug. When not in use store the appliance indoors in a clean dry area. (Fig. 6)
How to Operate Vacuum Cleaner
The On/Off switch is a three position switch. The middle setting "0" is the off position. (Fig. 7). The top setting
"I" is the on position (Fig. 8) and the bottom setting "II" is the maximum power position (Fig. 9). Use the top
setting "I" for cleaning hard oors and throw rugs.
Always turn switch to off setting "0" before returning the handle to the upright position and before unplugging
cord from electrical outlet.
(Fig. 2)
(Fig. 7)
(Fig.3)
(Fig.8)
(Fig. 5)(Fig. 4)
(Fig. 9)
(Fig. 6)

7
HANDLE ADJUSTMENTS
HOW TO CHANGE THE VACUUM BAG
EDGE CLEANING FEATURE
The handle on this vacuum cleaner can be set to one of three positions – upright, working or low.
How to Adjust the Handle
1. Upright position – for storage (Fig. 14). Handle locks in this position.
2. To release the handle, step on the left rear corner of the vacuum cleaner and pull handle back. (Fig. 15).
3. Working position – for normal cleaning (Fig. 16).
4. Low position – for cleaning under furniture (Fig. 17).
Always operate the vacuum cleaner with a vacuum bag installed.
How to Change the Vacuum Bag
CAUTION: First, unplug the vacuum cleaner from the electrical outlet.
1. Unzip outer cloth bag. (Fig. 10)
2. Remove used bag by pressing the bag holder tab and pulling bag off vacuum (Fig. 11). Discard used bag.
3. To install new bag, position the bottom of the bag collar into the bag collar holder.
4. Push the top of the bag collar inward until the collar “snaps” into place under the bag holder tab. (Figs. 12-13)
5. Zip the outer cloth bag closed.
The Edge Cleaning Feature provides improved
cleaning of carpets near walls and stationary furni-
ture. For maximum edge cleaning, use the left side
of the vacuum near walls or stationary furniture.
(Fig. 10) (Fig. 11) (Fig. 12) (Fig. 13)
(Fig. 15) (Fig. 17)(Fig. 16)(Fig. 14)

8
CIRCUIT BREAKER PROTECTION
Your new vacuum cleaner is protected by a circuit breaker to prevent motor damage due to airow or brush obstruction.
Should your vacuum cleaner experience an obstruction, the circuit breaker will trip and safely turn off the vacuum cleaner.
To reset circuit breaker
1. Press the on/off switch to the off position “O” and unplug the vacuum cleaner cord.
2. Check brush and remove any entangled objects. Remove bottom plate to access obstruction if necessary.
3. Check for airow obstruction and remove obstruction (full bag, clog in brush head air intake, clog in handle, etc.).
4. After removing obstruction reset the circuit breaker by pushing the reset button and resume operation (Fig. 22).
NOTICE: Do not repeatedly reset circuit breaker button without removing obstruction, motor failure may result and void warranty.
If vacuum cleaner fails to turn on, contact a Tennant or Nobles Authorized Service Center or Distributor.
(Fig. 22)
HOW TO REPLACE THE VACUUM BELT
NOTE: To ensure maximum cleaning efciency, the belt should be checked regularly to be sure it is in good
condition. Replace the belt if it is stretched, cracked, or if excessive slipping is occurring.
1. Turn the vacuum cleaner over and remove the bottom plate. (Fig. 18)
2. Remove the brush and the belt from the brush pulley and the motor drive shaft. (Figs. 19 - 20)
3. Slide the new belt on the right side of the motor drive shaft to get it looped around the motor drive shaft.
Then loop the belt onto the brush. (Fig. 21)
4. Reinstall the brush back into the housing. Turn the brush by hand, making sure the belt is not
twisted and all rotating parts move smoothly.
5. Reinstall the bottom plate.
CAUTION: Turn off and unplug the vacuum
cleaner before performing any of these steps.
CAUTION: Turn off and unplug the vacuum
cleaner before performing any of these steps.
(Fig. 18) (Fig. 21)(Fig. 20)(Fig. 19)
SELF-ADJUSTING BRUSH HEAD
Your upright vacuum cleaner is designed with a Self-Adjusting Brush Head. No manual adjustments are required. The
height of the brush head is instantly adjusted to carpet pile height. This self-adjusting feature allows the brush head to
oat evenly over all carpet pile surfaces.

9
ELECTRICAL DIAGRAM MACHINE SPECIFICATIONS
• Keep machine and all accessories clean and in good operating condition.
• Change vacuum bags and lters as recommended to maintain optimum cleaning efciency.
• Always use OEM bags, lters and parts, as use of other products may result in poor cleaning of ltration
performance. OEM products are designed for maximum performance.
• Have machine checked periodically by a Tennant or Nobles Authorized Service Center or Distributor.
• Store machine carefully in a dry area.
• For optimum cleaning performance and safety, follow your owner’s manual.
• After each use, carefully wrap power cord around handle and check cord for wear or damage. If cord is
damaged, have power cord replaced by a Tennant or Nobles Authorized Service Center or Distributor
immediately.
Model V-LWU-13
Voltage / Frequency 120 V / 60 Hz
Vacuum motor rating 6 AMPS
Bag capacity – dry Total: 11.3 qt. / 12.46 L
Fill line: 6.7 qt. / 7.46 L
Airflow 106 cfm / 180 m3/h
Vacuum – water lift at sealed orifice 71 in / 1804 mm
Filtration 99.9% @ 0.3 micron
Brush width 13 in / 33 mm
Cable length 50 ft /15 m
Weight 8 lb / 3.6 kg
Noise level 79 dBa, 69.9 dB(A)
Construction class I
Protection IP20
RECOMMENDED SPARE PARTS
FOR BEST PERFORMANCE
Item# Description
9009005 BAG, HEPA (PKG OF 6), FR/
9009028 BAG, PAPER (PKG OF 6), FR/
9009020 MOTOR FAN, ASSY, FR/
9009030 CORD, POWER, FR/
9009035 BELT, BRUSH (pkg of 6), FR/
Tennant Featherlite ULW
Brush Base Compartment
Handle Harness
M
White
White
Red
Yellow
Yellow
Black
Black
Black
Motor
PC Board
Out In
Circuit
Breaker
Top
Bottom
ON/OFF Switch
Power
Cord
Handle Assembly Compartment
o
-
Black
Black
White
=
Red
White
Green
Green
Green
Green

10
GENERAL ÍNDICE
REGISTRO PARA EL CLIENTE
Este manual se entrega con cada aspiradora vertical
nueva. Proporciona las instrucciones de operación y
mantenimiento necesarias y la lista de partes.
Lea todo el manual y conozca la máquina antes
de operarla o de realizarle mantenimiento.
Cuando solicite repuestos, utilice la sección de este
manual donde se detallan las Listas de partes. Antes de
realizar un pedido de partes o suministros, asegúrese
de tener a mano el modelo de la máquina y su número
de serie. Los componentes y los suministros se pueden
solicitar en línea, por teléfono, por fax o por correo, o bien
a cualquier Distribuidor o Centro de Servicios Autorizado
de Tennant o Nobles.
DESEMPAQUE: Verique cuidadosamente la caja de
cartón para descartar la existencia de daños. Informe los
daños de inmediato a la empresa de transporte.
PROTEJA EL MEDIO AMBIENTE
Deseche el embalaje y los componentes
viejos de la máquina de forma tal que no
dañe el medio ambiente, conforme a las
normas locales en materia de desechos.
No olvide reciclar.
Tanto el modelo como el número de serie de este producto se pueden encontrar en la parte posterior de la unidad. Para
su protección, usted debería completar la tarjeta de garantía que se adjunta y enviarla por correo a nuestra atención lo
antes posible. Además, apunte el modelo y el número de serie de su unidad en los espacios que siguen a continuación,
y guarde este manual como registro permanente de su compra.
Número de modelo: _____________________________________________________________________________________
Número de serie: ________________________________________________________________________________________
Fecha de compra: _______________________________________________________________________________________
Su nueva aspiradora es un producto fabricado con materiales de alta calidad y una mano de obra superior. Le
solicitamos que lea estas instrucciones operativas atentamente antes de utilizar esta aspiradora, a n de disfrutar
del rendimiento y la satisfacción que puede ofrecerle.
Instrucciones importantes de seguridad .........................11
Instrucciones para la conexión a tierra .............................12
Etiqueta de seguridad ......................................................12
Identicación de las partes ...............................................13
Cómo reemplazar las bolsas y la correa ..........................13
Cómo ensamblar y operar la aspiradora ...........................14
Cómo reemplazar la bolsa ................................................15
Función de limpieza de bordes .........................................15
Ajustes del mango .....……………………………………….15
Cabezal con cepillo autoajustable ....................................16
Cómo reemplazar la correa de la aspiradora ....................16
Protección en caso de cortocircuito .................................16
Para un mejor funcionamiento ..........................................17
Esquema eléctrico .............................................................17
Especicaciones de la máquina ........................................17
Piezas de repuesto recomendadas ...................................17
V-LWU-13 Lista de partes .................................................26
Garantía .............................................................. Contratapa
Tennant Company
PO Box 1452
Minneapolis, MN 55440 USA
Teléfono: [phone] o [phone]
www.tennantco.com
www.nobles.com
Las especicaciones y las partes pueden sufrir modica-
ciones sin previo aviso.
Copyright © 2011 TENNANT Company. Todos los derechos reservados.