TESA BNR 77767 User manual

ProductInformation
tesa® Adjustable Adhesive Nail for Tiles
& Metal 4kg
BNR 77767
Height adjustable adhesive nail for up to 4kg. Perfect for hanging and aligning objects like kitchen utensils on smooth and
solid surfaces like tiles & metal.
Features
• For smooth and solid surfaces like tiles indoors
• For objects up to 4kg per nail or 8kg using 2 nails
• Height adjustable for straight alignment of objects
• Removable without a trace
• Reusable with a new strip
Product Properties
• Type of tape Double-sided adhesive
• Transparent no
•UV-resistant no
•Water resistant no
•Humidity resistant no
•Oil- and grease-resistant no
•Ozone resistant no
•Resistance to chemicals No
• Solvent free yes
• Suitable surfaces Tiles, Glass, Even wood,
Steel, Acrylic glass, Most
plastics
•Reusable yes
•Waterproof no
•Reusable with sms-refill-nail-tiles-3kg
•Batteries required no
•Batteries included no
Technical Data
• Application temperature min. 15° C
• Area of use Indoor
•Material PS (polystyrol)
•Residue-free removable yes
•Type of adhesive synthetic rubber
• Temperature resistance
from
5 °C
•Temperature resistance
up to
35 °C
•Silicone free yes
•Hazard material no
Application
How to apply – Step by step 1. To ensure the best possible bond, clean the surface with a silicone-freewindow cleaner or
methylated spirit. The surface should be completely dry before application.
2. The Adhesive Strip should be applied to the rougher surface.
3. Press down evenly over the entire strip for at least 5 seconds and then remove the protective foil. Be careful not to touch
the exposed adhesive area at any time.
4. Now apply your tesa® Adhesive Nail by aligning it on the top edge of the strip and then folding it down. Press down
evenly on the entire nail for at least 5 seconds.
. The tab should be left accessible behind your object or beneath the nail for easy removal.
6. Push the red toggle up to unlock and adjust the nail head to the desired position, and then lock the head in place by
pushing the red toggle back down until it clicks into place.
Page 1 of 1 – as of 08/09/21 – en-US
For latest information on this product please visit
http://l.tesa.com/?ip=NaN

ProductInformation
tesa® Adjustable Adhesive Nail for Tiles
& Metal 4kg
Disclaimer
tesa® products prove their impressive quality day in, day out in demanding conditions and are regularly subjected to strict
controls. All information and recommendations are provided to the best of our knowledge on the basis of our practical
experience. Nevertheless tesa SE can make no warranties, express or implied, including, but not limited to any implied
warranty of merchantability or fitness for a particular purpose. Therefore, the user is responsible for determining whether
the tesa® product is fit for a particular purpose and suitable for the user’s method of application. If you are in any doubt, our
technical support staff will be glad to support you.
Page 2 of 1 – as of 08/09/21 – en-US
For latest information on this product please visit
http://l.tesa.com/?ip=NaN