
ProductInformation
tesa® Powerstrips Waterproof
Strips Large
BNR 59700, 59774
tesa Powerstrips Waterproof are large self-adhesive mounting strips made for the removable wall fixation of objects
weighing up to 2 kg.
Features
• Especially developed to fix objects in wet areas (e.g. shower, bathtub, etc.)
• Maximum hold of up to 2 kg on smooth surfaces
• Removable without a trace due to the Powerstrips® Waterproof technology
• Maximum hold of up to 2 kg on smooth surfaces
• Strong hold for objects on surfaces like tiles, glass, etc.*
• Suitable for the whole Powerstrips Waterproof accessory range
*Not suitable for use on styrofoam, foamed material, surfaces with non-stick coating, porous material
Product Properties
• Applicationfield Bathroom, Kitchen
• Type of tape Double-sided adhesive
•Holding power up to 2 kg
•Transparent no
•UV-resistant no
•Water resistant yes
•Humidity resistant yes
•Oil- and grease-resistant no
• Ozone resistant yes
• Resistance to chemicals No
•Solvent free no
•Suitable surfaces Tiles, Glass, Even wood,
Steel, Acrylic glass, Most
plastics
•Reusable no
•Waterproof yes
•Batteries required no
•Batteries included no
Technical Data
• Application temperature min. 15° C
• Area of use Indoor
•Residue-free removable yes
•Type of adhesive synthetic rubber
•Total thickness 650 µm
• Age-resistant yes
• Temperature resistance
from
5 °C
•Temperature resistance
up to
35 °C
•Hazard material yes
Application
How to apply - step by step guide: 1. Clean the surface with alcohol or silicone-free glass cleaner
2. Take the included waterproof primer tissue and wipe over the surface for bonding preperation - wait for 10 seconds
minimum
3. Apply the Powerstrip Waterproof Large strip on the object - press for 5 seconds minimum
4. Fix object onto surface - press for 5 seconds minimum
5. Make sure the tab can be accessed for removal
Page 1 of 1 – as of 07/09/21 – en-US
For latest information on this product please visit
http://l.tesa.com/?ip=59700