TESmart HKS0401A1U-G Installation instructions

SUPPORT MANUAL
TESmart 4-Port Grey KVM HDMI
Video Switch, 4K 60Hz UHD,
Audio Output, USB Sharing
HKS0401A1U-G
www.buytesmart.com [email protected]

INTRODUCTION
This 4x1 HDMI 2.0 KVM Switch provides you with great flexibility in
integrating cross-platform computer equipment easily.
It makes you available to switch easily and reliably between any HDMI
computers using one HDMI compliant display.
The 4x1 HDMI 2.0 KVM Switch supports USB 2.0 hub and USB 2.0
keyboard /mouse. By using USB 2.0 hub ports on the KVM, you even
can attach USB drive, printer, barcode scanner or other USB devices to
the KVM.
Switching can be controlled through variable methods, such as the front
panel source selector buttons, IR signals and hot keys on keyboard.
With EDID emulators in every input ports, keep PCs always have correct
display information, prevent display settings changed while switching
input ports. Support analog L/R audio output.
2
HKS0401A1U-G

FEATURES
Using only 1 set of keyboard, mouse and monitor to control
4 computer devices.
Available to use keyboard without any delay after switch input sources.
Support hot key commands and mouse gesture to switch inputs.
Support resolution up to 3840*2160@60Hz 4:4:4
Compliant with HDMI 2.0 and HDCP 2.2
Support USB 2.0 for printers, USB drives etc.
With EDID emulators in every input ports, keep PCs always have
correct display information.
Support front panel buttons, IR signals, keyboard hot keys to control
KVM switch.
Supports Unix, Windows, Debian, Ubuntu, Fedora, Mac OSX,
Raspbian, Ubuntu for Raspberry Pi and other Linux based systems.
Support auto switching among all devices so as to monitor the devices
in a specified time interval.
Support hot plug, connect or disconnect devices to the KVM switch in
any time and without turn off devices.
Support analog L/R audio output.
Support HDR 10 and Dolby Vision.
3
HKS0401A1U-G

Using only 1 set of keyboard, mouse and monitor to control
4 computer devices.
Available to use keyboard without any delay after switch input sources.
Support hot key commands and mouse gesture to switch inputs.
Support resolution up to 3840*2160@60Hz 4:4:4
Compliant with HDMI 2.0 and HDCP 2.2
Support USB 2.0 for printers, USB drives etc.
With EDID emulators in every input ports, keep PCs always have
correct display information.
Support front panel buttons, IR signals, keyboard hot keys to control
KVM switch.
Supports Unix, Windows, Debian, Ubuntu, Fedora, Mac OSX,
Raspbian, Ubuntu for Raspberry Pi and other Linux based systems.
Support auto switching among all devices so as to monitor the devices
in a specified time interval.
Support hot plug, connect or disconnect devices to the KVM switch in
any time and without turn off devices.
Support analog L/R audio output.
Support HDR 10 and Dolby Vision.
PACKING LIST
1 x 4x1 HDMI 2.0 KVM Switcher
1 x DC 5V Power Adapter
1 x IR Remote Control
2 x 5' KVM Cables
1 x User manual
4
HKS0401A1U-G

PANEL DESCRIPTION
ID Name Description
1 Mouse gesture switching status and
sensitivity adjust
The LED will be lit if the mouse gesture is turn on.
Press the button to adjust the sensitivity among 500ms,
750ms, 1000ms, 1250ms, 1500ms.
2 IR receiver Receive IR remote signal
3 Input selection button Select input source
4 Input selection status Indicate current active selected input source
5 USB connection status The corresponding LED will be lit if the USB data port is well
connected tothe computer and the computer is on.
6 Power switch Turn on or off power supply
7 DC 5V input DC5V power supply
8 HDMI output Connect to HDMI display
9 Standard USB2.0 port Connect to USB 2.0 devices, printers, USB drives
10 Keyboard and mouse input Connect to keyboard and mouse
11 HDMI input ports Connect to HDMI source devices
12 USB data ports Connect to computer USB ports.
13 L/R audio output Analog L/R audio output
5
HKS0401A1U-G

CONNECTION DIAGRAM
6
HKS0401A1U-G

SPECIFICATION
HKS0401A1U-G
4x1 HDMI 2.0 KVM Switch
Functiona
lity:
Au
to Scan Yes
Po
rt selection
Front panel buttons Yes
Keyboard hotkeys Yes
IR remote control Yes
T
echnical:
Res
olution Up to 3840x2160@60Hz 4:4:4
H
DMI version 2.0
Au
to to get EDID Yes
Da
ta rate 18 Gbps
Au
to scan interval 1~250 Seconds
Bee
p Sound On/Off
O
SD No
Sup
ported OS
Unix/Windows/Debian /Ubuntu /Fedora /Mac OS X/
Raspbian /Ubuntu for Raspberry Pi and other Linux
based system
Co
nsole ports
Keyboard emulation 1 * USB Type A
Mouse emulation 1 * USB Type A
USB 2.0 Hub ports 1 * USB Type A
Video /Audio 1 * HDMI Type A
S
ystem ports
USB Data 4 * USB Type B
L/R Audio output 1 * AUX
Video / Audio 4 * HDMI Type A
ES
D protection Human body model - ±8kV (Air-gap discharge)
M
echanical:
Ch
asing material Aluminum Alloy
P
roduct dimensions 300 (L) x 117 (W) x 30w (H) mm
I
tem weight 800g
7
HKS0401A1U-G

HOW TO USE
1- Setup the connection according to the connection diagram.
2- After all the PCs are started in step 1, you can switch to any PC by
keyboard hotkeys, IR keys or the keypad on the KVM front panel.
For example, if you want to control the PC connected to HDMI IN 2 just
press the "Select" button on the front panel or press digit button "2" on
the remote control or also the keyboard hotkey commands.
8
HKS0401A1U-G

KEYBOARD HOT KEYS
1- Hit SCROLL LOCK twice within 2 seconds, the buzzer will beep twice.
2- After step 1 enter the following Hot Key command within 3 seconds.
The KVM will execute the corresponsing command.
Known issue: Apple Keyboard is not supported yet.
9
HKS0401A1U-G

CONTACT
Thank you for purchasing the TESmart 4-Port KVM HDMI Video Switch.
We are here to help you!
Do you need assistance setting up your product?
Please make sure you visit:
- https://buytesmart.com for more details and product information
- https://buytesmart.com/apps/help-center for support knowledge base
and Frequently Asked Questions.
10
HKS0401A1U-G

BuyTESmart
https://buytesmart.com
[e-mail]
© 2019 BuyTESmart