Testifire Mk2 Manual

Testire Warranty
Counter
With the launch of Testire Mk2, the way in which warranty is calculated has changed. The warranty period which is 12 months is now
calculated on each Testire by an internal day counter that starts counting from the rst day that the unit is turned on.
The number in the top right corner indicates how many days
of the warranty have lapsed. The example to the right shows
140 days have passed since it was rst turned on
(W=Warranty).
>For Firmware Version 6.5 to 7.3.1
To access the warranty day counter please turn on your Testire and navigate to the System Information screen as follows:
1. Press the Menu Key.
www.detectortesters.com
Page 1
SIS14-6
October 2017
Special Information Sheet
2. Select System Info. 3. View the System Info. Screen 4. Press left green; right
green; left green key
followed by ‘Down’
arrow to display the
warranty screen
Left green Right green
Down
Menu Key

Page 2
Testire Warranty
Counter
SIS14-6
October 2017
Special Information Sheet
www.detectortesters.com
No Climb Products Ltd
Edison House
163 Dixons Hill road
Welham Green, Hertfordshire
AL9 7JE, United Kingdom
Tel: [phone]
Fax: [phone]
>For Firmware Version 7.3.2 Onwards
To access the warranty day counter please turn on your Testire and navigate to the System Information screen as follows:
NOTE. Any accidental damage, tampering or water ingression of any kind will always invalidate Testire warranty.
If the Testire will not power on. Warranty age can be calculated from the date of manufacture. See SIS19.
1. Press the Menu Key
Menu Key
2. Select System Info.
3. View the Warranty Info Screen. The number
of days displayed is the number of days since
rst powered on.
>Further Information
Should you require any further information regarding the use of, detectortesters test equipment,
Contact our Product Support team on 01707 282760 or email [email protected]