Tevion STB7017 User manual

DIGITAL SET TOP BOX
STB7017
INSTRUCTION MANUAL
CHANNEL
STB 7017
Now youhave purchaseda Tevion productyou canrest
assured inthe knowledgethat aswell asyour 3year parts
and labourwarranty youhave theadded peaceof mindof
dedicated helplines:
After SalesSupport

Tableof Contents
Welcome section----------------------------------------------------------------------- 1
Introduction----------------------------------------------------------------------------- 2
Safety Information--------------------------------------------------------------------- 3
Remote Control-------------------------------------------------------------------------- 4
Front and Rearpanel illustration--------------------------------------------------- 6
Connecting to aTelevision----------- ----------------------------------------------- 7
Connecting to aTelevision andVideo--------------------------------------------- 8
Connecting to a Surround Sound System--------------------------------------- 9
Getting Started------------------------------------------------------------------------ 10
-------------------------------------------------------------------------- 12
Basic Operations---------------------------------------------------------------------- 15
--------------------------------------------------------------------- 18
Channel List----------------------------------------------------------------------------- 19
Favourite List--------------------------------------------------------------------------- 20
--------------------------------------------------- 20
------------------------------------------------- 20
Help andAdvice------------------------------------------------------------------------- 21
Technical Specifications-------------------------------------------------------------22
Switching on forthe first time------------------------------------------------------ 10
Automatic channelscan------------------------------------------------------------ 11
Manual channel scan----------------------------------------------------------------11
System Setting
A/V Setting---------------------------------------------------------------------------- 12
Antenna Power----------------------------------------------------------------------- 13
First TimeInstallation--------------------------------------------------------------- 13
System Info---------------------------------------------------------------------------- 13
Change Pin Code---------------------------------------------------------------------14
Software Update--------------------------------------------------------------------- 14
Changing Channels----------------------------------------------------------------- 15
Volume Control---------------------------------------------------------------------- 17
Teletext/Subtitle----------------------------------------------------------------------17
TV Format------------------------------------------------------------------------------17
Pausing the currentpicture---------------------------------------------------------17
Channel Schedule
Delete a channel----------------------------------------------------------------------19
Lock/Unlock a channel---------------------------------------------------------------19
Adding channels tofavourite list
Remove favourite channelsfrom favourite list----------------------------------20
Accessing thefavourite channels

11

Introduction
Thank you for purchasing this product which has been designed and
manufactured to give you many years of trouble-free service.
About This User Guide
This user guide contains all the information you need to know about how to
setup and watch available free view Channels using your set top box.
22
Trade Mark of the DVB Digital Video Broadcasting
Project(1991 to 1996)
Digital Video
Broadcasting
Accessories In the Box
Remove your Digital set top box carefully from the box ,and remove the
packaging from each part.
You will find the following items:
Digital set top box with fitted mains plug
Remote Control with 2XAAAbatteries (not installed)
What is Freeview?
It is thenew, freedigital service currentlyproviding up tothirty digital channels,
over twenty digitalradio stations plusa whole newworld of interactiveservices. It
is broadcast fromtransmitters and isreceived via arooftop aerial.Freeview works
like traditional TV, but becausethe signals aredigital you needa set topbox or
interactive digital TVto convert them.This means morechannels can be
transmitted with extrafeatures such asinteractivity and widescreenpictures.
Quick Start Guide
User Manual

CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
Safety Information
Position the cablesso that theycannot be walkedon or pinchedby items
placed on oragainst them.
Do not usethe set topbox in humidor damp conditions.
Do not allowthe set topbox to getwet.
Do not placewater filled objectssuch as vaseson top ofthe set topbox.
Do not exposethe set topbox to drippingor splashing.
Do not placenaked flame sources,such as candles,on the topof the set
top box.
Cleaning
ALWAYS unplug theset top boxbefore you cleanit.
Do not useliquid or aerosolcleaners.
Clean the settop box witha soft, damp(not wet) cloth.
Ventilation
The slots andopenings on the set top boxare for ventilation.Do not cover
or block themas it may cause overheating.
NEVER let childrenpush anything intothe holes orslots on thecase.
Servicing
There are nouser serviceable partsin this settop box.
When servicing, referto qualified servicepersonnel.
Consult your dealerif you areever in doubtabout the installation,operation
or safety ofthis unit.
33
Battery Disposal
Please ensure batteriesare disposed ofsafely.
Check with yourlocal authority fordisposal regulations.
Safety is Important
Toensure your safety and the safetyof others, pleaseensure you read
the Safety Instructionsbefore you operate this product.
Keep this informationin a safeplace for futurereference. Please readall
the safety informationbefore using theproduct.
Safety Considerations.
Never dispose ofbatteries in afire or withother household waste.

OK
DTV/VCR
MUTE
PAUSE
123
456
7890
TEXT
FAVOURITE
STANDBY
LANGUAGESUBTITLE WIDE
P+
P-
VOL+
RECALL
VOL-
EXITMENU
INFOEPG
Remote Control
44
Remote Key Function:
1. DTV/VCR Used to switch betweenthe VCR SCARTinput
and the DTV outputmode.
2. MUTE Used to turn the sound on or off.
3. P+:Used to change thechannels.
4. PAUSE Used to pause orplayback the programme being
viewed .
5. P-:Used change the channels.
6. EXIT Used to return tothe previous screen ormenu.
7. OK Used to confirm aselection within a menu.
8. CURSORS(Up/Down/Left/Right): Used to move around
the menu screens.
9. INFO Used to display informationabout the channel being
viewed or further informationabout the programme whenin
small EPG screen.
10 FAVOURITE Used to access yourfavourite channels.
11. RECALL Used to switch betweenthe last two viewed
channels.
12. LANGUAGE Used to switch betweendifferent audio
languages that are broadcasted.
13. WIDE:Used to change theTV picture aspect.
14. STANDBY Used to switch the set top box toon and off.
15. VOL+ Used to change thevolume.
16. VOL- Used to change thevolume.
17. MENU Used to open themain menu window.
18. EPG Used to display informationabout the programme being
viewed and what's onnext.
19. NUMBER KEYS Used to select channelnumbers or input
numbers in menus.
20. TEXT:Used to open interactivedigital teletext display if
teletext available in thebroadcasted stream.
21. SUBTITLE:Used to switch amongdifferent subtitles that
are broadcasted.
22. COLOUR KEYS(Red/Green/Yellow/Blue):Used to operate
different functions inTEXT screen or othermenus.
Note: SUBTITLE/TEXT/LANGUAGE may not be available
for all channels.

55
Installing the Batteries
Remove the batterycover from theremote control andput 2xAAAsize batteries
inside the compartment.
The diagram insidethe battery compartmentshows the correctway to installthe
batteries.
OPEN
OPEN
1.Open the cover 2.Install batteries 3.Close the cover
Using the RemoteControl
Touse the remotecontrol, point ittowards the frontof the digitalset top box
The remote controlhas a rangeof up to7 metres fromthe set topbox at anangle
of up to60 degrees.
The remote controlwill not operateif its pathis blocked.
Sunlight or verybright light willdecrease the sensitivityof the remote
control.

CHANNEL
STB 7017
66
Front Panel andRear Panel Illustration
1. Front panel
1 RF IN : This socket connects to your external aerial.
2 RF LOOPTHROUGH: This socket willbypass the RF signalto either yourTV or another
video system.
3 COAXIAL: This socket connectsto a coaxial socketon your surround soundsystem.
4 VCR SCART: This socket connectsto either a DVDor other video system.
5 TV SCART: This socket connectsto your TV.
6 RS-232 PORT: This socket isonly used for softwareupgrade.
7 MAINS CABLE: This is usedto connect to yourmain power supply.
1 POWER BUTTON: Used to switch theset top box onand off.
2Standby Indicator: Used to visually showpower state of theset top box, thegreen
LED will show ifturned on the settop box and thered LED will belight if the set top box
entered standby mode.
3 REMOTE CONTROL SENSOR: Used to receive thesignal from the remotecontrol.
4 CHANNEL UP/DOWN: Used to change channelswithout using the remotecontrol.
34
ININRRFFLOOPLOOPRRFF
THROUGHTHROUGH
CoaxialCoaxial
Digital
Audio
Digital
Audio
VCR O OVCR O O TVTV
Serial No.:
DIGITAL TERRESTRIAL RECEIVER
POWER SUPPLY: 100-240V~ 50/60Hz
MAX POWER CONSUMPTION: 10WATTS
MADE IN CHINA 100-240V~
50/60Hz
SERVICE
STB 7017

77
Connecting to aTelevision
TV
Set top box
100-240V~
50/60Hz

88
Connecting to aTelevisionand Video
VCRor Video system
TV
Set top box
100-240V~
50/60Hz

Connecting to aSurround Sound System
99
Audio system
100-240V~
50/60Hz
Set top box
TV

Getting Started
1010
Turn onyour TV setand select thecorresponding AV input (withthe AV key,or
simular, onthe television remotecontrol).
Turn onthe main powersupply to theSTB, the indicatoron the frontof the unitwill
turn red andthen green. Instandby mode, theindicator light willbe red. In
working mode, theindicator light willbe green.
If you usethe STB forthe first timeor have deletedall channels information
in the STB,a "TV Setting"menu displays.
Press the "LEFT"or "RIGHT" cursorbutton to chooseeither "16:9" or"4:3".
Press the "OK"button to continue installation, a confirmationmessage
window displays asright.
Press the "LEFT"or "RIGHT" cursorbutton to highlight"confirm".
Press the "OK"button to continue." Scan Progress"menu will appearand list
the channels as they are found. A bar appears below the listing panel that
indicates the progressof the channelsearch.
When all available radio and television channels have been found, the
channel at thetop of thelist will beviewed.
Switching on forthe first time

1111
Automatic channel scan
1) Press the"MENU" button toenter the mainmenu of theSTB.
2) Press the"UP" or "DOWN"cursor button toselect Channel Search
3) Press the"OK" button toenter the sub-menu.
4) Highlight the"Search Type"and press the"LEFT" or "RIGHT"cursor button
to select "Auto Scan".
5) Press the"OK" button tostart searching.
6) Press the"EXIT" button toquit.
Manual channel scan
1) Press the"MENU" button toenter the mainmenu of STB.
2) Press the"UP " or"DOWN" cursor toselect "Channel Search"
3) Press the"OK" Button toenter the sub-menu.
4) Highlight the"Search Type"and press the"LEFT" or "RIGHT"cursor to
select "Manual Scan".
5) Press the"DOWN" cursor toselect "Channel No"section, and enter
desired Channel Number.
6) Press the"OK" button tostart searching.
7) Press the"EXIT"button to quit.
Note: When thesearch is finished,the first channelof the channellist is displayed
you can nowwatch digital terrestrialtelevison.

1212
Many aspects ofyour STB canbe set toreflect your circumstancesand
preference. The SystemSetting menu isaccessed from mainmenu.
A/V Setting
This menu allowsthe users toset TV shape,Video Output andOSD
Transparency.
1). Press the"MENU" button toenter the mainmenu of theSTB,
2). Press the"UP" or "DOWN"cursor to selectSystem Setting,
3). Press the"OK" button toenter the sub-menu,
4). Press the"UP" or "DOWN"button to select"A/V Setting" andPress the
"OK" button toenter its sub-menu.
TV Shape options:4:3 / 16:9
Video Output options:RGB / CVBS
OSD Transparencyrange: 0~100%
5), Press the"UP" or "DOWN"button to selectthe desired itemand press the
"LEFT" or "RIGHT" button toselect desired setting,
6), Press the"MENU" button toreturn the uppermenu or "EXIT"button to quit.
System Setting

1313
Antenna Power
This menu allowsusers to activethe antenna powersupply for externalactive
antenna.
1. Enter theSystem Setting menu,press the "UP"or "DOWN" cursorto
highlight the Antenna Power menu.
2. Press the"OK" button toenter theAntenna Power menu,
3. Press the"LEFT" or "RIGHT"cursor to toset the statusto "ON" or"OFF",
4. Press the"OK" button tosave the settingand quit, pressthe "EXIT" buttonto
quit without savethe setting.
First Time Installation
This menu allowsthe user todelete all existingchannels in theSTB, and reset
the STB tofactory default setting.
1). Enter theSystem Setting menu,press the "UP"or "DOWN" buttonto
highlight the "FirstTime Installation".
2). Press the"OK" button toconfirm, a confirmationwindow appears.
3). Press the"LEFT" or "RIGHT"cursor to highlight"Confirm" icon, pressthe
"OK" button tostart first timeinstallation.
4). Or Highlight"Exit" icon, pressthe "OK" buttonto cancel thefirst time
installation.
System Info
This menu allowsusers to viewthe software versionand hardware versionof
the STB.
1). Enter theSystem Setting menu,press the "UP"or "DOWN" cursorto
highlight the SystemInfo menu.
2). Press the"OK" button toopen up theinformation box. You can viewthe
software version andhardware version ofthe STB inthis box

1414
Change Pin Code
This menu allowsusers to changepin code
1), Enter theSystem Setting menu,press the "UP"or "DOWN" cursorto highlight
the Change PinCode menu.
2), Press the"OK" button toenter the sub-menu.
3), Enter theold pin codeusing the numericbuttons(Default pin codeis 888888).
4), Press the "UP" or "DOWN"cursor to select"New Pin Code"and enter sixnew
numbers with numericbuttons(0~9).
5), Press the"UP"or "DOWN" cursorto select "EnterAgain", andenter the new
pin code againwith numeric buttons(0~9).
6), Press the"OK" button toconfirm the changedpin code.
Software Update
This menu allowsusers to updatethe software version.
1, Enter theSystem Setting menu,press the "UP"or "DOWN" cursorto highlight
the Software Updatemenu.
2, Press the"OK" button toenter the sub-menu,
Auto Mode:
1), Enter thesoftware update menu,press the "UP"or "DOWN" cursorto
highlight Auto Mode.
2), Press the"OK" button toenter AutoMode menu,
3), Press the "LEFT" or "RIGHT"cursor to setthe status to"ON",
4), Press the "UP" or "DOWN"cursor to selectStart Time.Use the numericbutton
to enter thetime in HH:MMmode.
5), Press the"OK" button tosave the settingand quit, thenthe system willstart
auto update atthe set time.

1515
Manual Mode:
1) Enter theSoftware Update menu,press the "UP"or "DOWN" cursorto
highlight Manual Mode.
2) Press the"OK" button toenter Manual Modemenu.
3) Press the "LEFT" or "RIGHT"cursor to highlight"Scan" icon.
4) Press the "OK" button tostart updating.
5) Press the"Exit" button toquit.
Changing Channels
There are fourways of channelselection - steppingthrough the channellist,
selection by number, from theon-screen channel list,and using theChannel
Schedule.
1,Stepping through thechannel list:
Press the "P+"button to browseup and the"P-" button tobrowse down the
available channels.
2, Selection bynumber:
Enter the completechannel number directlyvia the remotecontrol to select
desired channel.
3, Selection byon-screen channels list:
Youcan also selectthe desired channeldirectly from on-screenchannel list. This
is displayed usingthe STB's
Basic Operations

1616
a), Press the"MENU" button toenter main menuof the STB.
b), Press the"UP" or "Down"cursor to select"Channel List".
c), Press the"OK" button toenter the channellist menu.
d), Press the"UP" or "DOWN"cursor to highlightthe desired channel.
e), Press the"OK" button topreview the selectedchannel.
f), Press the"EXIT" button toquit the channellist and viewthe channel onfull
screen.
4, Selection byChannel Schedule:
Youcan also selectthe desired channeldirectly from ChannelSchedule. This is
displayed by pressingthe "EPG" buttonon the remotecontrol. The Channel
Schedule provides theusers with abrief description ofthe programme onthe
currently selected channeland lists thecurrent channels.
1),Press the "EPG"button to enterthe Channel Schedule.
2),Press the "P+"or "P-" cursorto select thedesired channel, thescreen switches
to the programmeon the currentlyselected channel.
3), Press the"EXIT " buttonto quit theChannel Schedule andview the channelon
full screen.
Recall
Youcan switch tothe previously viewedchannel by pressingthe “RECALL"
button.

1717
Volume Control
The volume levelof the STBcan be alteredwith the "VOL+" or "VOL-" button on
the remote control.
Youcan silence thesound from thereceiver by pressingthe "MUTE" button.The
sound remains muteduntil the "MUTE"button is pressedagain or untilthe "VOL+"
or "VOL-" buttonis pressed, oruntil the receiveris turned offand on again.
Teletext
Press the "TEXT"button to Open/Closethe interactive digitaltext.
Subtitle
Press the "SUBTITLE"button to switchthe programmes subtitleto On/Off.
Displaying programme information
Youcan read thecurrent programme informationby pressing "INFO"button on
the remote control,then the programmeinformation table willautomatically
remove in 3~5seconds.
TV Format
Youcan change theTV picture aspectby pressing "WIDE"button repeatedly on
the remote control.
When you set"TV shape" to"4:3" in theSystem Setting->A/V Settingmenu, you
can switch theTV format to"FullFrame","Pan&Scan" or "LetterBox".But when
you set itto "16:9", youcan switch to"Auto", "FullFrame", "VerticalCut" or
"PillarBox".
Pausing the currentpicture
Youcan freeze thecurrent picture bypressing the "PAUSE" button onthe remote
control. Press thebutton again toswitch the currentbroadcast programme back
on to "live".
Note: the broadcastbetween these twopauses will beskipped.

1818
From the channelschedule(EPG,Electronic programme Guide),you can change
channels available, checkprogramme information, accessone-week programme
schedule which detailsthe times andprogrammes for thenext seven days.
1, Press the"EPG" button toenter the ChannelSchedule.
2, Press the"CH+" or "CH-"button to previewthe current programmeon the
selected channel, andcheck the currentprogramme information.
3, Press the"LEFT"or "RIGHT" cursorto navigate theprogramme lists forthe next
seven days.
4, Press the"UP "or "DOWN"cursor to highlightthe desired programme.
5, Press the"OK" button toadd a reminder, then remindericon will appear
alongside the selectedprogramme, press the"OK" button againto remove the
reminder. Whenthe reminder programmeis about tostart, a reminderwindow will
appear.
6, Press the“EXIT" button toquit the channelschedule.
Note: The currentbroadcast programme cannotbe set asa reminder event.
Channel Schedule