Texas Instruments LOGIC PD ZOOM OMAP-L138 User manual

Baseboard
OMAP-L138
SOM-M1
4.3” LCD
Power Supply & Cord
(use power cord specific
to your region)
USB SD Card
Reader
Demo setup.
(Setup development kit to sample OS demo.)
1Connect OMAP-L138
SOM (use outline on
baseboard for positioning),
press straight down over
connectors
2Connect 4.3” LCD,
remove protective
plastic covering 3Insert Linux SD card
(slot on bottom of
baseboard)
4Verify all DIP switches
are set to the OFF
position 5Connect power cord
and supply 6Connect power to baseboard and electric
outlet
7Switch power on 8GUI will appear on LCD
screen
1
2
3
4
6
7
Next steps
Important baseboard locations.
(Numbers correspond to steps on the right and back pages.)
SD Card
(Linux Demo)
99
11
12
User Interface (UI) Board
Ethernet Cable
Serial Cable
Items used in this QuickStart Guide.
(Complete kit contents provided on the included Packing List.)

ZOOM™
OMAP-L138
EVM
QuickStart Guide
Congratulations on your purchase of the Zoom OMAP-L138 EVM Development Kit. This
Zoom Development Kit provides a product-ready hardware and software platform for
evaluating the functionality of the Texas Instruments (TI) OMAP-L138 processor and the
Logic PD System on Module (SOM).
For more information:
www.logicpd.com/omapl138evm
411 N. Washington Ave. Suite 400 Minneapolis, MN 55401
T : 612.672.9495 F : 612.672.9489 I : www.logicpd.com
©2012 Logic PD, Inc. All rights reserved. Zoom is a trademark of Logic PD, Inc. The Texas Instruments
logo and name are registered trademarks of Texas Instruments Incorporated. Terms and product names
in this document may be trademarks of others.
PN 1022628A
If you are having trouble accessing the Linux OS
demo on the included SD card, try the following:
+Verify that the OMAP-L138 SOM is securely
connected to the baseboard.
+Verify that all DIP switches are set to the OFF
position.
+Verify that the correct SD card is inserted into
the baseboard.
Troubleshooting
To gain access to kit and SOM documentation,
register your kit on the Logic PD website at:
support.logicpd.com/auth/register_product.php
Register Your Kit
Locate the START HERE folder on
the SD card and view setup.htm .
Use the information in setup.htm to
determine the next steps specific
to your development environment.
Linux DVSDK
For support questions, please contact:
support.logicpd.com/support/askaquestion.php
For community support, please visit:
www.ti.com/e2e
The TI Embedded Processors Wiki can be found at:
processors.wiki.ti.com
For more information on the TI OMAP-L138 processor
or to download the latest TI software, visit:
www.ti.com/omap-l138-prprod1
Connect Ethernet
cable to baseboard
and host PC or
router
11
Connect serial cable
to baseboard and
host PC
12
Next steps.
(Prepare your workstation for software development.)
10 Secure boards
with included nylon
screws at the
locations indicated
13 Remove SD card and
insert it into included
USB SD card reader;
connect USB SD card
reader to host PC
9Power off kit and
connect UI board to
baseboard connectors at
center and on the right