6
User Guide
Thank you for purchasing our portable speaker teXet TPA-
2173 X-Duo. Before you start operating the unit, please read
this manual to take full advantage of the portable speaker
and extend its life. Save this manual to refer to it in the future
if the need arises.
This manual contains information on the technical
characteristics of the device, controls of the portable speaker,
all functions and modes of operation.
Note: Due to continuous product improvement, we reserve
the right to modify the software, hardware, and specications
without prior notice to the end user. Current information is
always available on the website www.texet.eu
1. Start of operation
Switch the power button to the ON position to turn on the X-Duo
portable speaker. When switched on, the LED light will turn blue.
Press the MODE button repeatedly to select different modes
for the X-Duo portable speaker: MP3 player, FM, or AUX.
If an audio cable or microSD card is connected when the
X-Duo is switched on, then the MP3 player mode will start
automatically.
2. MP3 player operation
Insert a microSD card in the microSD slot or a USB ash drive
into the port. Playback will start automatically. During
playback, the X-Duo portable speakers LED light will slowly
ash blue. Use the button to select the previous/next
le. Files will be played sequentially by folder. Use the
button to pause or resume playback.
Press and hold the button to adjust the volume.
When switched on, the X-Duo portable speaker recalls all