Thane Fitness H2O e3 User manual

1
Instruction Manual

2 3
THANK YOU!
Congratulations on your choice of the H2O e3™ Natural Cleaning
System from Thane™, the super Effective, Economical and Eco-friendly,
natural, yet powerful, cleaner, antibacterial and deodorizer!
The H2O e3™ Natural Cleaning System is the latest H2O™ innovation
that will revolutionize the cleaning industry and the way you clean your
home, forever! You can use it as cleaner, antibacterial and deodorizer for
your entire home simply by transforming salt and drinking water into an
electrolyzed cleaning solution. With just simple science, and electricity
the H2O e3™ eActivator energizes the water you drink to create a natural
all-purpose cleaning solution that we call S-Water™!
The H2O e3 S-Water™ is powered by the water you drink and
super-charged with cleaning, antibacterial and deodorizing oxidants!
To find out more about S-Water™ and to get the most out of your H2O
e3™ Natural Cleaning System, please make sure to read this entire
Instruction Manual before first use.
Thanks again for trusting the H2O™ brand from Thane™!
Thane™ and its affiliated companies assume no liability for personal injury
or property damage resulting from the misuse of the H2O e3™ Natural
Cleaning System, including the failure to comply with the instructions
contained in this Instruction Manual or provided by the manufacturer or
distributor of the treated surface.
IMPORTANT SAFETY INFORMANTION IS ENCLOSED
READ ALL INSTRUCTIONS BEFORE USING THE H2O e3™ NATURAL
CLEANING SYSTEM
S-Water™ EXPLAINED!
The passage of energy through clean water is very poor since water is
not a good conductor of electricity. To make water conductive, common
table salt (NaCl) is added and dissolved.
In our case, S-Water™ is produced by electrolysis of ordinary tap/drinking
water (H2O; hydrogen and oxygen) containing dissolved table salt,
sodium chloride (NaCl; sodium and chlorine). The result is an effective,
economical and eco safe cleanser, antibacterial and deodorizer.
When an electrical current is applied to the salt water solution, the water
and salt molecules are broken apart and combined into a few new molecules,
including hypochlorous acid (HClO) and hypochlorite ion (-OCl).
The hypochlorous acid and hypochlorite ion molecules coexist in various
ratios in S-Water™, and their amounts are dictated by the pH (acidity vs
alkalinity) of the S-Water™.
Hypochlorous acid is a known sanitizing, bacteria killing and deodorizing
agent (or oxidant), and is the same substance our white blood cells
produce to keep our immune system healthy. The sodium hydroxide
(NaOH) found in electrolyzed water is a type of detergent, is used in
wide range of products in various concentrations (toothpaste, all-purpose
cleaners, etc) and it provides optimal conditions for the cleaning action
of the hypochlorite ion, another powerful oxidant.
These molecules exist in very safe and non-toxic amounts in S-Water™
we generate with the H2O e3™ eActivator, but are still enough to make it
a very effective cleaner, antibacterial and deodorizer
The oxidants, or oxidizing agents, work by OXIDATING (breaking down)
and eliminating dirt, bacteria and odors!
The pH of the resulting electrolyzed water is an important factor in
understanding how S-Water™ works and it is affected by the concentration
of salt, the current and amount of time the current is running. By varying
these factors, the S-Water™ can be made more alkaline (better cleaning)
or acidic (better antibacterial effect).
The S-Water™ pH we achieve with just salt and water is in the neutral/
mildly alkaline range so that we get a very effective cleaning agent that
provides good antibacterial effect. Plus, we have the option of adding
vinegar, after the S-Water™ is produced, to make it more acidic for an
even better antibacterial effect. The vinegar lowers the pH (and increases
acidity) of the S-Water™ so that better antibacterial effect can be
achieved!

4 5
WARNINGS AND CAUTIONS
PLEASE READ ALL PRODUCT INSTRUCTIONS CAREFULLY.
FAILURE TO FOLLOW THE PRODUCT INSTRUCTIONS WILL
VOID YOUR WARRANTY.
USE YOUR H2O e3™ NATURAL CLEANING SYSTEM ONLY
AS DIRECTED IN THIS MANUAL AND ONLY WITH THE
MANUFACTURER’S RECOMMENDED ACCESSORIES.
AS WITH ANY ELECTRICAL APPLIANCE, BASIC PRECAUTIONS
SHOULD ALWAYS BE OBSERVED WHEN USING THIS
PRODUCT, INCLUDING THE FOLLOWING:
When using the H2O e3™ Natural Cleaning System basic
safety precautions must always be followed:
1. Read all instructions before operation
2. Always follow ALL safety precautions and Instruction
Manual directions when working with H2O e3™ Natural
Cleaning System and S-Water™.
3. Verify that the voltage indicated on the adapter rating
label corresponds with the voltage of your electrical
outlet.
4. This appliance is designed for household use only.
Commercial use of the H2O e3™ Natural Cleaning
System voids the manufacturer’s warranty.
5. Always unplug the H2O e3™ eActivator when
cleaning or performing any other user maintenance.
6. Do not drink the S-Water™ after electrolysis is done.
7. Do not use hot water to make S-Water™, and do not
heat or boil the finished S-Water™.
8. Always use the amount of salt and vinegar as per the
instructions in this manual. Do not add more as this
can can create excessive fumes and cause breathing
difficulties.
9. When making S-Water™, do not use distilled water
and always use regular table salt and white vinegar.
10. Do not add any ingredients, before or after electrolysis,
except for those stated in this Instruction Manual.
Fragrances or scented oils will diminish the cleaning
and bacteria killing effectiveness of the S-Water™.
11. Always use regular table salt to make S-Water™. Using
other kinds of salts, like Epsom salts, will not yield S-Water™
and the resulting solution will not be an effective cleaner
or bacteria killer.
12. Never electrolyze cleaners, sanitizers or any other
flammable, explosive or toxic solution. Electrolysis shall
only be supplied to water, salt and vinegar as instructed
in this Instruction Manual.
13. Never mix ammonia products with S-Water™. This
practice may produce toxic fumes that can cause
breathing difficulties
14. Do not mix S-Water™ with acidic toilet bowl cleaners
as this can result in toxic fumes causing breathing
difficulties.
15. Do not mix S-Water™ with any other cleaners.
16. Keep this appliance and its cord out of the reach of
children younger than 8 years old.
17. This appliance can be used by children aged 8 years
and above and by persons with reduced physical,
sensory or mental capabilities or lack of experience
and knowledge ONLY IF they have been given
supervision or instruction concerning use of the
appliance in a safe way and understand the hazards
involved.
18. Cleaning and user maintenance shall not be made by
children unless they are older than 8 years old and
supervised by a responsible adult.
19. Children shall not play with this appliance.
20. Do not use this appliance with a damaged cord or
adapter. If it is not working as it should, or if it has
been dropped, damaged, left outdoors, or immersed
in water, return it to the distributor. If the supply cord
is damaged, it must be replaced by the manufacturer
or a qualified repair facility to avoid hazard.

6 7
H2O e3™ NATURAL CLEANING SYSTEM DIAGRAM
OPTIONAL ITEMS
Double-sided Coral and
Microfiber eMop Cloth
Double-sided Scrubbing and
Microfiber eMop Cloth
eSprayer
Nozzle
Measuring
Spoon
Microfiber Cloth
for Hand Cleaning
Adapter
Input: 100-240V~ 50/60Hz
Output: 5V/1A
Fruit & Veggie eActivator and
eSprayer Nozzle (in white and blue)
Hook
Trigger
Aluminum Pipe
Sleeve
Locking System
eActivator
Holder
eMop Head
Handle
EVA sleeve
eActivator
eMop Nozzle
21. If the supply cord on the adapter is damaged, it must
be replaced by the manufacturer or its service agent
or a similarly qualified person in order to avoid a hazard.
22. Never force the plug into an outlet or pull or carry the
unit by the cord. Do not use the cord as a handle, close
a door on the cord or pull the cord around sharp edges
or corners. Keep the cord away from heated surfaces.
23. Do not use extension cords or outlets with inadequate
current-carrying capacity, and in order to avoid circuit
overload, do not operate another appliance on the
same socket (circuit) as the H2O e3™ eActivator.
24. Do not operate the H2O e3™ Natural Cleaning System if
it, or any of its parts, have been damaged in any way.
25. To reduce the risk of electric shock, unplug the adapter
from the outlet when not in use.
26. Never use the H2O e3™ Natural Cleaning System in
frost or temperatures above 50ºC/122ºF or humid or
wet locations.
27. S-Water™ might cause corrosion or damage on
unprotected, corrosion prone, metals so it is advisable
to wipe them off after application.
28. Do not use H2O e3™ Natural Cleaning System on
unsealed wood floors, carpet, leather, clothing, or any
other fabric or soft materials. Continuous use will
cause discoloration/fading of color of these materials
over time.
29. To avoid leakage, check the following points after filling
the H2O e3™ eActivator with water:
• Make sure the e3™ eActivator cap is sealed properly
and twisted on tight.
• Check that the eActivator base is fixed properly
onto the eActivator water tank.
• Check the Valve Cap Assembly on the eActivator
and make sure it is sealed.
30. Do not use this appliance for anything other than its
intended use.
SAVE THESE INSTRUCTIONS
FOR HOUSEHOLD USE ONLY

8 9
NOTE: For optimal results,
make sure to shake the
water and salt solution until
all the salt is dissolved.
This will make the S-Water™
more concentrated with
the cleaning, antibacterial
and deodorizing oxidants.
4. Plug in the Adapter into the eActivator, and then press the ON/OFF
button, see figure h) above. The red indicator light will turn red and
the electrolysis process will begin.
NOTE: The electrolysis process is preprogrammed to run for 10 minutes,
and it will automatically stop after 10 minutes of electrolysis.
5. Once the electrolysis process is done and 10 minutes has passed, the
indicator light will turn green, indicating the electrolysis process is
complete and the S-Water™ is ready for use.
6. Optional: To create an even more effective antibacterial version of
the S-Water™, after the electrolysis process is done, add one spoon of
white vinegar (0.21ml) to the eActivator and shake to mix it in.
NOTE: The generated S-Water™ (with or without vinegar) will be
effective for 1-2 weeks. After two weeks, its effectiveness will be
lowered considerably.
Do not drink, heat, or mix the generated
S-Water™ with any cleaning or sanitizing products and
keep it out of reach of children.
For Floor Cleaning/Mop Use:
7. Insert the eActivator into the eActivator Holder as shown in figures
i), j) and k) below. Then, turn eActivator locking mechanism to secure
the eActivator in place, see figure k).
Figure g) Figure h)
Indicator
Light
ON/OFF
Button
ASSEMBLY INSTRUCTIONS
1. Install the eMop Head onto the eActivator Holder, as shown in figures
a) and b) below.
2. Connect the two aluminum pipes as shown below in figures c), d),
and e).
NOTE: The buckle hole on the upper aluminum pipe should be aligned
with the buckle on the bottom aluminum pipe when connecting. Make
sure that the buckle clicks into the buckle hole for secure assembly.
USER INSTRUCTIONS
1. Fill the eActivator, shown in figure g) below, with 450ml of regular
tap/drinking water.
Do not use hot or boiling water to make
S-Water™, and do not heat or boil the finished S-Water™.
2. Add one spoon (provided with unit), which equals to 3g, of regular,
table salt.
3. Close the eActivator cover and shake it for a few seconds, until all the
salt is dissolved. Then place the eActivator on a level surface.
Figure c)
Figure a) Figure b)
buckle buckle hole
Figure d)
Figure e)
Figure i) Figure j) Figure k)
!WARNING
!WARNING

10 11
8. Place the Double-sided eMop Cloth onto the eMop Head and press the
trigger, shown in Figure l), upwards, in order to spray the S-Water™
from the eMop Nozzle* onto the floor.
*NOTE: Turn the eMop Nozzle in either direction, as shown in Figures
l) and m) below and choose between a more concentrated or wide spray
mode.
For Spray Bottle Use:
9. Place eSprayer Nozzle, shown in Figure n), onto the eActivator.
*NOTE: Turn the eSpayer Nozzle Head in either direction, as shown in
Figures o) and p) below and choose between a more concentrated or
wide spray mode.
Figure n) Figure o) Figure p)
CLEANING & MAINTENANCE
• The Double-sided eMop Cloths are machine washable or they can be
rinsed under tap water. Always, make sure they are completely dry
before next use.
• The H2O e3 eMop can be cleaned with a damp cloth.
• The inside of the H2O e3 eActivator can be cleaned thoroughly
with vinegar. Place approximately 50ml of vinegar and 200ml of water
into the eActivator, close the eActivator cap and shake the contents.
Let the water/vinegar solution sit inside the eActivator for 20 -30 min.
Empty the eActivator, rinse thoroughly with regular tap water and use new
water to make the next batch of S-Water™. If necessary repeat the
cleaning process or let the water/vinegar solution sit longer inside the
eActivator until limescale is completely removed from the metal mesh.
In areas with hard water limescale removal should be done more frequently.
• It is recommended to clean the inside of the eActivator if it is used
for electrolysis more than once. For example, if you are making multiple
batches back to back and having the electrolysis process run for more
than 15-20 minutes, add vinegar to the water tank after use and shake
it and soak the metal electrolysis net for about 3 minutes. After cleaning
with vinegar, rinse it thoroughly with regular tap water again.
CORRECT DISPOSAL OF THIS PRODUCT
This marking indicates that this product should not be disposed
with other household wastes throughout the EU. To prevent
possible harm to the environment or human health from
uncontrolled waste disposal, recycle it responsibly to promote
the sustainable reuse of material resources. To return your
used device, please use the return and collection systems
or contact the retailer where the product was purchased.
They can take this product for environmentally safe recycling.
Figure l) Figure m)
Trigger

Distributed by:
Thane Canada Inc.
Mississauga ON L4W 5M6, Canada
www.thane.ca
Thane USA, Inc.
Canton OH 44718, U.S.A.
www.thane.com
Thane Direct UK Limited
[phone]
www.thane.tv
Danoz Direct Pty Ltd.
Bondi Junction, NSW, 2022, Australia
www.danoz.com.au
OPERADORA AINOA SAPI DE CV
Av. Magnocentro No. 5 Piso 1 Col. Centro Urbano Interlomas
Municipio Huixquilucan de Degollado, Huixquilucan, Estado de México. C.P: 52760
www.mejorcompratv.com
TVNS Scandinavia AB
SE-211 74 Malmö, Sweden
www.tvins.com
© 2019 Thane IP Limited.
“Thane”, “H2O e3” and related logos and variations are trademarks or
registered trademarks, in Canada and/or other countries, of Thane IP Limited
and/or its affiliated companies.
MADE IN CHINA H2O e3 MNL ENG R1 191016