THE RADIATOR COMPANY Halo Vertical User manual

Materials Steel
Connections ow and return.
Test pressure 12 Bar
Testing authority EN442
Maximum operating pressure 8 Bar
Maximum working temperature 95 ºC
Packaging Encased in polystyrene, seated within a cardboard box
1
2
”
The Radiator Company
Units 13 - 14 Charlwoods Road
East Grinstead
West Sussex
RH19 2HU
All products must be inspected once removed from the packaging and The Radiator Company
notied within 28 days of delivery of any scratches, blemishes or other damage.
The Radiator Company will then replace the radiator.
Imperfect radiators should therefore not be tted and The Radiator Company will not accept
responsibility for replacement of scratched or damaged radiators once they have been tted. This
includes any consequential loss or cost of tting.
If The Radiator Company are not notied within 28 days of the date on the signed delivery note then
it will be deemed that The Radiator Company have fully complied with its obligations and claims will
not be considered.
Failure to comply with any of the above may invalidate any claims.
We recommend that after you check the product on delivery that it is stored in its packaging to
prevent damage prior to installation. The Radiator Company cannot accept responsibility for items
damaged after delivery.
Terms & Conditions
Guarantees & Liabilities
As we are not the manufacturers of this product we will take all reasonable endeavours to make
over to you the benet of any warranty or guarantee given by the manufacturer, which is usually ve
years on most of our range. (Copies of specic guarantees for any of our products are available on
request).
The guarantees in all cases are subject to the products being installed in accordance with British and
or European standards as well as these tting instructions. The guarantees in all cases are restricted
to the free of charge replacement or repair of the failed product only. Our liability will under no
circumstances extend beyond the repair or replacement of the product supplied by us. Claims
for either labour in replacement or damage to property are not admissible. Any goods that are
returned, in the event of a problem, will belong to The Radiator Company.
Technical Specications
The Halo is a classic contemporary design.
Industrial and eye catching making use of tall
spaces.
Please read these instructions and terms and
conditons carefully prior to installation.
Failure to do so may invalidate the warranty
Halo
Vertical
Fittings Instructions
If you have any questions please contact us on 01342 302250
www.theradiatorcompany.co.uk
If you have any questions please contact us on 01342 302250
www.theradiatorcompany.co.uk
5
Y
e
a
r
G
u
a
r
a
n
t
e
e
Y
e
a
r
G
u
a
r
a
n
t
e
e
HALOV1.2
THE
RADIATOR
COMPANY
PLEASE NOTE: Systemsusingmicroborepipeworkmusthaveadequatepressureandow
rates for the number and style of radiators on the system.

Unpack & Inspect
1
You should have:
• 1 Radiator
• 1 Airvent
• 1 Fixing Kits including: 4 screws and 4 wall plugs
You will need:
• Tape measure
• Electric drill and bits
• Spirit level
Contents
2
Hang Radiator
3
Diagrams of Halo
The Radiator Company prides itself on selecting products from
manufacturers who exercise tight quality control measures. We
only select models with excellent standards of welding and
brazing, as well as high quality nishes. All of our products are well
packaged and should reach you in perfect condition. Just in case
however, we offer a minimum 5-year no quibble guarantee for all
radiators and towel rails.
The Radiator Company must be notied of
any shortages or damage within 28 days of
delivery. For further information please see
terms and conditions on back page.
1. Hold up the radiator to the wall
and mark through the drill holes of the
brackets.
2. Take down the radiator and using
a spirit level, ensure the brackets are
vertically aligned.
3. With the bracket markings level, x
the bracket to the wall using suitable
drill bits and plugs.
PLEASE NOTE :
It is essential that all brackets are level to
ensure a vertical alignment for connecting
the pipework.
wPipe Centres
Pipe centres left to right
Pipe centres from wall
Depth from wall
Commission
4
Please Note:
In accordance with Part L1 2006 of the Building Regulations and
BS7593:1992 code of practice for the treatment of hot water
and central heating systems, we strongly recommend flushing
the heating system post installation of new radiators and then
adding the correct quantity and type of inhibitor for use with
your radiator and system to prevent corrosion. Damage caused to
systems not protected by a suitable inhibitor will not be covered
by manufacturer’s guarantee.
60mm
148mm
225mm
225
155
70
in out
Underneath view
Top view
ow and return
1
2
”
60
Ø155
Please Note: The supplied xings are not suitable for all wall
types. Please ensure the correct xings are used for your wall
type.
148
148