THE WORLD MODELS Pilatus PC-6 Porter 40 User manual

A340PO30611410
Warning! This model is not a toy.
It is designed for maximum performance. Please seek advice if one is not familiar with this kind
of engine powered precision model. Operating this model without prior preparation may cause
injuries. Remember, safety is the most important thing. Always keep this instruction manual at
hand for quick reference.
*Specifications are subject to change without notice.*
INSTRUCTION MANUAL
Wing Span
Wing Area
Flying Weight
Fuselage Length
64 in / 1625 mm
592 sq in / 38.2 sq dm
5.5 Ib / 2500 g
45.5 in / 1155 mm
Specifications
FACTORY PRE-FABRICATED
ALMOST-READY-TO-FLY(ARF)SERIES
MADE IN CHINA
The World Models
Manufacturing Co., Ltd.
www.theworldmodels.com
(A340)
Requires: "Glow Power" requires 4-channel radio w/5 standard
servos, 2-stroke 0.40-0.46 engine, or "Electric Power"
requires 4-channel radio w/ 4 standard servos,
Outrunner Motor KM37490750 w/Radial Mount
Adaptor HW2340300, 40A Brushless ESC, 4 cells
14.8V 3200mAh Lipo battery and charger

A340PO30611410
INDEX
BEFORE YOU BEGIN
BEFORE YOU BEGIN
PARTS LIST
ASSEMBLY
SAFETY PRECAUTIONS
P.1
P.2
P.3-P.13
P.14
Check all parts. If you find any defective or missing parts contact your local dealer. Please
DRY FIT and check for defects for all parts that will require CAor Epoxy for final assembly.
Any parts you find to be defective after the gluing process may be difficult to remove for
warranty replacement. The manufacturer will replace any defective parts, but will not extend
to the parts that are good before gluing to defective parts during assembly. Warranty will
not cover any parts modified by customer.
Symbols used throughout this instruction manual comprise of the following :-
Read through the manual before you begin, so you will have an overall idea of what to do.
1
2
3
P.1
Cut off shaded portion.
Ensure smooth non-binding
movement while assembling.
Apply instant glue
(C.A.glue, super glue.)
Assemble left and right
sides the same way.
Peel off shaded portion
covering film.
Pay close attention here!
Apply epoxy glue.
Must be purchased separately !
Drill holes with the specified
diameter (here: 3mm). Pierce the shaded portion
covering film.
3mm
Do not overlook this symbol !
Warning!
Apply thread locker

A340PO30611410
P.2
10. SIDE WINDOWS -- 1 set
WIND SHIELD -- 1 pc.
SCREW PWA2.3x8mm -- 4 pcs
SILICON GROMMETS PL1265035 d1.5xD6.5mm -- 4 pcs
11. PILOT PC001050A -- 2 sets
PLYWOOD 4x97.5x125mm -- 1 pc.
PLYWOOD 4x93x125mm -- 1 pc.
MOUNTING PLATE PL4114015 -- 1pc.
SCREW PM2x12mm -- 1pc.
WASHER d2xD5mm -- 1 pc.
M2 NYLON INSERT LOCK NUT -- 1 pc.
12. SCREW PWA2x8mm -- 8 pcs
SERVO MOUNTING PANEL PL5310000 -- 1 pair
13.
PUSHROD Ø1.8x86mm w/ Threads (For Aileron) -- 2 pcs
TRI-HORN PL4111221 -- 2 sets
SCREW PB2x20mm -- 4 pcs
SCREW PB2x18mm -- 2 pcs
CLEVIS PL4112103 -- 2 pcs
FUEL TUBE D6x5mm -- 4 pcs
STRAPER PL4112102 -- 2 pcs
14. WING TUBE Ø10x663mm -- 2 pcs
SCREW PA3x20mm -- 4 pcs
WASHER d3.2xD12mm -- 4 pcs
15. WING STRUTS -- 2 pcs
SOCKET HEAD SCREW M3x12mm -- 6 pcs
SCREW PA3x12mm -- 2 pcs
WASHER d3xD7mm -- 6 pcs
WASHER d3.2xD12mm -- 4 pcs
M3 NYLON INSERT LOCK NUT -- 2 pcs
PLATE 2mm -- 2 pcs
16. SPONGE -- 10x50x150mm -- 1 pc.
17. BATTERY COVER -- 1 pc.
Parts List
COVERING:--
TOUGHLON STL 311 FERRARI RED
TOUGHLON STL 100 WHITE
LIGHTEX SGX 201 BLACK
1. DECALS: A340 DEC -- set
MAIN WING -- 1 pair
FUSELAGE -- 1 pc.
2. STABILIZER & ELEVATOR -- 1 set
SCREW PM3x20mm -- 1 pc.
WASHER d3.2xD7mm -- 1 pc.
3. VERTICAL FIN & RUDDER -- 1 set
4. PUSHROD Ø1.8x613mm w/ Threads (For Rudder) -- 1 pc.
CLEVIS PL4112103 -- 1 pc.
SCREW PB2x14mm -- 3 pcs
TRI-HORN PL4111221 -- 1 set
FUEL TUBE D6x5mm -- 1 pc.
5.
PUSHROD Ø1.8x590mm w/ Threads (For Elevator) -- 1 pc.
SCREW PB2x14mm -- 6 pcs
CLEVIS PL4112103 -- 2 pcs
TRI-HORN PL4111221 -- 2 sets
FUEL TUBE D6x5mm -- 2 pcs
6. TAIL LANDING GEAR -- 1 pc.
TAIL WHEEL Ø23mm -- 1 pc.
COLLAR Ø2.1mm w/ Set Screw -- 2 sets
SCREW PA3x12mm -- 2 pcs
SCREW PM2x12mm -- 1 pc.
PLATE 0.3mm -- 1pc.
M2 NUT -- 1pc.
7. MAIN LANDING GEAR -- 1 pc.
COLLAR Ø3.6mm w/ Set Screw -- 4 sets
MAIN WHEEL Ø58mm -- 2 pcs
SCREW PA3x12mm -- 12 pcs
MOUNTING PLATE PL4114020 -- 6 pcs
8.
COWLING --1 pc.
DUMMY ENGINE -- 1 set
TRANSPARENT 3D TEMPLATE -- 1 pc.
SCREW PWA2.6x12mm -- 4 pcs
SILICON GROMMETS PL1265035 d1.5xD6.5mm -- 4 pcs
SPINNER Ø57mm PL2111057N -- 1 set
SCREW PA3x10mm -- 2 pcs
PLYWOOD 5x50x72.5mm -- 1 pc.
9. STRAPER PL4112102 -- 2 pcs
FUEL TUBE D6x5mm -- 2 pcs
PUSHROD CONNECTOR PL4410010 -- 1 set
PUSHROD Ø1.8x85mm (For Elevator ) -- 1 pc.

A340PO30611410
P.3
Decals
1
Cut out decal sheet, peel off backing sheet and
apply on fuselage and wings. Decal
LeftView
RightView
Top View
BottomView
Main wings
Fuselage
Instrument Panel

A340PO30611410
PM3x20mm
Washer d3.2xD7mm
Stabilizer & Elevator
2
Vertical Fin & Rudder
3
Rudder Pushrod
4
The hinges are factory glued.
The hinges are factory glued.
P.4
PM3x20mm Screw
1
PB2x14mm Screw
3
d3.2xD7mm Washer
1
Right View
Pre-glued
Pre-glued
Remove coverings for all surfaces in contact before applying A/B epoxy glue.
PB2x14mm
Fuel Tube
D6x5mm
Pushrod
Ø1.8x613mm
Clevis
Tri-horn
M3x14mm
B B'
B=B'
Ø1mm pilot holes for World Models horn are pre-drilled. Please look for pin-hole marks at
side of control surfaces.