Thermaltake Pacific Ultra Core P6 DP-D5 Plus User manual

Installation Guide
1 2 3
4 5 6
Scan Here
Installation Guide
Pacific Ultra Core P6 DP-D5 Plus
Parts List
Distro Plate
Ax 1
LED Y-Cable
G x 1
x 4
x 4
B x 2
ScrewBracket
C x 4
G1/4 Stop Plug
D x 3
Wrench
E x 1
Controller
F x 1
Power Cable
H x 1
Controller Cable
I x 1
Bridge Cable
J x 1
MB SYNC Cable
K x 1
Velcro
L x 1
This product is intended for installation only by expert users. Please consult with a qualified technician for installation.
Improper installation may result in damage to your equipment.
1. Please carefully read the manual before beginning the installation process !
2. It is strongly recommended to use market proven pre-mix coolant, such as Thermaltake Coolant 1000.
3. DO NOT USE any kind of alcohol or alcohol derivatives with this reservoir or the acrylic tube may crack and fail ! Do not clean it using alcohol either
B
B
C
C
A

Installation Guide
© 2022 Thermaltake Technology Co., Ltd. All Rights Reserved. www.thermaltake.com
7 8 9
Circle 1
Designed for liquid fill, you
may choose one of the ports
to use.
Circle 2
Designed for liquid inlet, you
may choose one of the ports
to use.
Circle 3
Designed for liquid outlet,
you may choose one of the
ports to use.
Circle 4
The drain port.
To avoid air bubble during
liquid cooling system
working, please fill the
reservoir with coolant to
the line (Normal coolant
level)
2
4
1
I
G
Mainboard SYNC installtation Guide
Please power off the PC and check the Positive and Negative ends on the connector
before connecting the cable to mainboard. Connecting the wrong end can damage the LEDs.
CAUTIONCAUTION
Connect the MB SYNC Cable to Water block
Aura Addressable Strip Header(s) Addressable RGB LED Header(s) AOURS RGB Fusion with Digital LEDs
ASUS ASROCK GIGABYTE
JRGB-strip Header(S)
MSIMSI
+5V D G
JRAINBOW
G
K KK K
K
G
3
3

Controller Installation Guide
13
2
I
Connect the reservoir cable onto the controller.
Set the DIP switch on the back side of the controller
to assign the number of the controller
NO.1
ON
1 2 3 4
NO.3
ON
1 2 3 4
NO.2
ON
1 2 3 4
NO.4
ON
1 2 3 4
NO.9
ON
1 2 3 4
NO.11
ON
1 2 3 4
NO.10
ON
1 2 3 4
NO.12
ON
1 2 3 4
NO.5
ON
1 2 3 4
NO.7
ON
1 2 3 4
NO.6
ON
1 2 3 4
NO.8
ON
1 2 3 4
4
NO.13
ON
1 2 3 4
NO.15
ON
1 2 3 4
NO.14
ON
1 2 3 4
NO.16
ON
1 2 3 4
Connect the controller cable onto the mainboard
(USB 2.0 9 pin) and controller.
If you want to connect two or more connectors,
you can use the bridge cable to connect the
controllers.
Connect the power cable to the 4pin Molex
connecter and controller.
H
J
123 45
F
I
H
J
G
5
Scan Here
Installation Guide
Pacific Ultra Core P6 DP-D5 Plus