Thermo Scientific 88882011 User manual

Basic Vortex Mixer
88882011 & 88882012
In the United States:
For customer service, call 1-800-766-7000
To fax an order, use 1-800-926-1166
To order online: thermofisher.com
Find out more at thermofisher.com
In Canada:
For customer service, call 1-800-234-7437
To fax an order, use 1-800-463-2996
To order online: thermofisher.ca
Operating Manual
Revision A . 04 01 2021
©2021 Thermo Fisher Scientific Inc.
All rights reserved. All trademarks are the property of Thermo Fisher Scientific and its subsidiaries unless otherwise specified.

Section 1 Important Information
Disposing of Product
Section 2 Introduction
Feature
Section 3 Inspection and Installation
Packing List
Connections
Structure Diagram
Section 4 Overview
Specifications
Environmental Conditions
Safety Instructions
Section 5 Operation
Control Panel
Installation of Accessories
Settings
Section 6 Safety Tips and Maintenance
Section 7 Troubleshooting
Section 8 Optional Accessories
Section 9 Warranty
Section 10 Compliance
Contents
1
2
3
3
4
4
4
4
5
5
5
6
7
7
8
10
11
13
14
15
16

Section 1 Important Information
Ignoring the following warnings could
cause serious injuries or even fatal
accidents.
Check the voltage, phase and capacity of
power supply on the ID plate before
installation. Connect properly.
Power supply must be properly
grounded. Abnormal grounded
connection causes serious damage.
Grounded connection must not be on the
water pipe and gas pipe.
Use provided power cord. Power cord:
Wall outlet with grounded terminal
power cord 250V 10A.
Do not install the product in a place that
gas could leak. Do not use in a place that
has industrial oil smoke or metallic dust.
It causes fire or electric shock. Do not
use the machine near to places where
explosion could happen due to organic
evaporating gases.
Explosive materials: acid, esther, nitro
compound.
Inflammable materials: salt peroxides,
inorganic peroxide, salt acids.
Check equipment for permissible
environmental conditions when using
inside of Temperature and Humidity
Chamber or Incubator. It can be the
cause of fire or trouble by stirrer
electricity, electronic, and damage of
motor.
Mixer's permissible environmental
condition. Temperature 5°C to 40°C,
Maximum relative humidity 85%.
Unplug if there is a strange sound, smell
and/or smoke from the product. Stop
operating and request the service.
Keep out of the direct sunlight. It may
influence product life and proper
operation.
Do not use the machine at places where
moisture is high and flooding can
happen.
Do not assemble, repair, modify on your
own, this product may not work well and
electrical shock may possible.
Changes to the product could result in
product inefficiency. Also this will void
warranty. Which also indicates a
hazardous situation, if not avoided may
result in minor or moderate injury.
Do not put heavy things on the power cord.
Do not put the machine on the cord. It
may take off the wire coating and cause
electric shock or fire.
Do not touch it with wet hands and place
the main plug correctly. It could cause
the electric shock or injuries.
Installing power outlet near instrument
may be convenient. Allow adequate spacing
around the product to ensure proper
ventilation, accessibility to the power
switch and for allowing the instrument to
run without impediment.
Do not install the Vortex Mixer near
machinery generating high frequency noise.
Avoid installation close to high frequency-
welding machine, sewing machine, or
mass SCR controller.
Do not inject any liquid and inflammable
things inside of product.
Do not pour water or put liquid on the top
of the product when cleaning. Disconnect
the main power immediately and request
the service if water may be in the product.
Do not let the product take any strong
shock or vibration. It could cause
abnormal operation or trouble. It may
deteriorate the ability of the product
operation and not obtain correct results.
Do not sprinkle insecticide or flammable
spray on the product. Use smooth
cloths. Cleaning with solvent can cause
fire and deformity.
Power off while product cleaning. It may
cause electric shock or fire.
Do not drop or allow the machine to fall.
It will cause wrong operation and
malfunction.
Only accessories that meet the
manufacturer's specifications shall be
used.
Disposing of Product
Dispose of the unit by separating the
plastic, motor and electronics and
dispose according to local laws and
regulations.
1 Section 1 | Important Information Basic Vortex Mixer 2

Section 2 Introduction
Welcome to use Thermo Scientific Vortex
Mixers. Vortex mixers are used in biomedical
engineering, physical and chemical analysis,
environmental monitoring, food, hygiene,
petrochemical, metallurgy and other fields,
for cell culture, sample tissue, chemical
reagents, bacteria liquid and other substances
mixed. It is suitable for test tubes, centrifugal
tubes, color tubes, enzyme plates, deep
hole plates, PCR plates and other containers.
This product is intended to be used in a
laboratory setting and is not to be used
in a clinical setting.
2.1 Feature
It can be easily switched between touch
and continuous modes and the
corresponding light is on when working
normally.
◆It has speed adjustment display
function.
◆It uses a knob to achieve stepless
speed regulation.
◆It has a high sensitivity touch switch.
◆A variety of accessories can be
selected to maximize the needs of
customers.
◆It uses brushless DC motor, with
accurate speed control, stability, safe
and reliable features.
◆DC motor design is suitable for long-
time operation, up to 1 week or longer.
◆It has a power recovery function.
◆The housing material is ABS, which
has excellent heat resistance,
corrosion resistance, impact resistance
and chemical resistance.
3 Section 2 | Introduction
3.2 Connections 3.3 Structure Diagram
Rubber Platform
Control Panel
Foot(8)
Power
Switch
Power
Adapter
Housing
Basic Vortex Mixer 4
Catalog Number
88882011
1
N/A 1
1
88882012
1
N/A
Figure
Description
3.1 Packing List
Basic
Vortex Mixer
Rubber Platform
Power Adapter
120V
Multi-Power
Adapter 220V
Knob
Section 3 Inspection and Installation
Before unpacking the unit, first check for
damages in the package of the unit.
Then unpack the unit. Check carefully to
see if there were damages incurred
during transit.
After unpacking, check that all unit parts
and accessories are as listed below.
Contact us or the agent from which you
purchased the unit if any components
were omitted.

Section 4 Overview
4.1 Specifications
Speed Range......................................................200 to 3000rpm
Speed Accuracy.......................................................................±5%
Orbit Diameter....................................................................￠4mm
Operating Mode............................................Touch /Continuous
Motor.............................................................Brushless DC motor
(Suitable for long-time operation)
Maximum Load……………………………………............0.5kg @ 800rpm
Overall Dimensions........................................205×151×131mm
Platform Diameter...........................................................￠76mm
Packing Dimensions......................................290×270×240mm
Net Weight.............................................................6.5Kg(14.33lb)
Gross Weight........................................................6.8Kg(14.99lb)
Input Requirement......................100-240VAC~, 50/60Hz, 6W
Output Requirement.....................................................24V ,1A
Certification..............................RoHS, WEEE, cCSAus, CE Mark
IP Class.....................................................................................IP32
Application Environmental Conditions: indoor use
Temperature....................................................................5 to 40℃
Altitude...........................................................................≤2,000 m
Humidity...................................................................... 20% to 85%
Storage Environmental Conditions
Temperature....................................................................0 to 60℃
Altitude...........................................................................≤2,000 m
Humidity.......................................20% to 90%, non-condensing
4.2 Environmental Conditions
Rotation Speed
Drive
SizeSize
Weight
Power Supply
Others
5 Section 4 | Overview Basic Vortex Mixer 6
4.3 Safety Instructions
Please read the entire instruction manual
before operating the Basic Digital Vortex.
WARNING DO NOT use the Basic
Vortex Mixer in a hazardous
atmosphere or with hazardous
materials for which the unit was
not designed. Also, the user should
be aware that the protection provided
by the equipment may be impaired
if accessories used are no provided
or recommended by the manufacturer,
or are used in a manner not specified
by the manufacturer.
CAUTION ! To avoid electrical shock,
completely cut off power to the unit
by disconnecting the power cord from
the unit or unplug from the wall outlet.
Disconnect unit from the power
supply prior to maintenance and
service. Any spills should be removed
promptly. Bio hazard spills should
be cleaned using approved liquid
promptly. Solvent spills are a fire
hazard. Stop the unit immediately,
and DO NOT operate until clean up
is complete and vapors have dissipated.
DO NOT immerse the unit for cleaning.
DO NOT operate the unit if it shows
signs of electrical or mechanical
damage.
Load