thomann STAIRVILLE DDC-12 User manual

DDC-12
DMX-controller
user manual

Musikhaus Thomann
Thomann GmbH
Hans-Thomann-Straße 1
96138 Burgebrach
Deutschland
Telephone: [phone]
E-mail: [email protected]
Internet: www.thomann.de
10.09.2015, ID: 258125 (V2)

Table of contents
1 General information................................................................................................................................. 4
1.1 Further information........................................................................................................................... 5
1.2 Notational conventions.................................................................................................................... 6
1.3 Symbols and signal words............................................................................................................... 6
2 Safety instructions..................................................................................................................................... 8
3 Features....................................................................................................................................................... 12
4 Starting up.................................................................................................................................................. 13
5 Connections and controls................................................................................................................... 16
6 Technical specifications....................................................................................................................... 19
7 Plug and connection assignment.................................................................................................... 20
8 Protecting the environment.............................................................................................................. 21
Table of contents
DDC-12
3

1 General information
This manual contains important instructions for the safe operation of the unit. Read and follow
the safety instructions and all other instructions. Keep the manual for future reference. Make
sure that it is available to all those using the device. If you sell the unit please make sure that
the buyer also receives this manual.
Our products are subject to a process of continuous development. Thus, they are subject to
change.
General information
DMX-controller
4

1.1 Further information
On our website (www.thomann.de) you will find lots of further information and details on the
following points:
Download This manual is also available as PDF file for you to download.
Keyword search Use the search function in the electronic version to find the topics of
interest for you quickly.
Online guides Our online guides provide detailed information on technical basics
and terms.
Personal consultation For personal consultation please contact our technical hotline.
Service If you have any problems with the device the
customer service will gladly assist you.
General information
DDC-12
5

1.2 Notational conventions
This manual uses the following notational conventions:
The letterings for connectors and controls are marked by square brackets and italics.
Examples: [VOLUME] control, [Mono] button.
1.3 Symbols and signal words
In this section you will find an overview of the meaning of symbols and signal words that are
used in this manual.
Letterings
General information
DMX-controller
6

Signal word Meaning
DANGER! This combination of symbol and signal word indicates an
immediate dangerous situation that will result in death or
serious injury if it is not avoided.
NOTICE! This combination of symbol and signal word indicates a pos‐
sible dangerous situation that can result in material and
environmental damage if it is not avoided.
Warning signs Type of danger
Warning – danger zone.
General information
DDC-12
7

2 Safety instructions
This device is used to control spotlights, dimmers, lighting effects equipment or other DMX-
controlled devices. Use the device only as described in this user manual. Any other use or use
under other operating conditions is considered to be improper and may result in personal
injury or property damage. No liability will be assumed for damages resulting from improper
use.
This device may be used only by persons with sufficient physical, sensorial, and intellectual
abilities and having corresponding knowledge and experience. Other persons may use this
device only if they are supervised or instructed by a person who is responsible for their safety.
Intended use
Safety instructions
DMX-controller
8

DANGER!
Danger for children
Ensure that plastic bags, packaging, etc. are disposed of properly and are not
within reach of babies and young children. Choking hazard!
Ensure that children do not detach any small parts (e.g. knobs or the like) from
the unit. They could swallow the pieces and choke!
Never let children unattended use electrical devices.
NOTICE!
Risk of fire
Do not cover the device nor any ventilation slots. Do not place the device near
any direct heat source. Keep the device away from naked flames.
Safety
Safety instructions
DDC-12
9

NOTICE!
Operating conditions
This device has been designed for indoor use only. To prevent damage, never
expose the device to any liquid or moisture. Avoid direct sunlight, heavy dirt, and
strong vibrations.
NOTICE!
External power supply
The device is powered by an external power supply. Before connecting the
external power supply, ensure that the input voltage (AC outlet) matches the
voltage rating of the device and that the AC outlet is protected by a residual cur‐
rent circuit breaker. Failure to do so could result in damage to the device and pos‐
sibly the user.
Unplug the external power supply before electrical storms occur and when the
device is unused for long periods of time to reduce the risk of electric shock or
fire.
Safety instructions
DMX-controller
10

NOTICE!
Risk of fire due to incorrect polarity
Incorrectly inserted batteries may destroy the device or the batteries.
Ensure that proper polarity is observed when inserting batteries.
NOTICE!
Possible damage by leaking batteries
Leaking batteries can cause permanent damage to the device.
Take batteries out of the device if it is not going to be used for a longer period.
Safety instructions
DDC-12
11

3 Features
Special features of this 12-channel DMX controller
n12 channel faders
nMaster fader
nCompact design
nSimple operation
nPower adapter included
Features
DMX-controller
12

4 Starting up
Unpack and carefully check that there is no transportation damage before using the unit. Keep
the equipment packaging. To fully protect the device against vibration, dust and moisture
during transportation or storage use the original packaging or your own packaging material
suitable for transport or storage, respectively.
Create all connections while the device is off. Use the shortest possible high-quality cables for
all connections. Take care when running the cables to prevent tripping hazards.
You can use either a 9-V battery or the 9-V connector for external power supply. Before con‐
necting check for correct polarity.
To insert or change the battery, switch off the device first. Loosen the screws located at the
edges of the base plate. Do not loosen the three screws in the middle of the base plate. Care‐
fully remove the base plate. Take care not to damage the cable. Change the battery.
Remount the base plate without squeezing the cables. Insert and tighten the screws.
Power supply
Changing the battery
Starting up
DDC-12
13

NOTICE!
Possible data transmission errors
For error-free operation make use of dedicated DMX cables and do not use ordi‐
nary microphone cables.
Never connect the DMX input or output to audio devices such as mixers or ampli‐
fiers.
Starting up
DMX-controller
14

Connect the DMX input of the device to the DMX output of a DMX controller or another DMX
device. Connect the output of the first DMX device to the input of the second one, and so on
to form a daisy chain. Always ensure that the output of the last DMX device in the daisy chain
is terminated with a resistor (110 Ω, ¼W).
Connections in DMX mode
Starting up
DDC-12
15

5 Connections and controls
Top view
Connections and controls
DMX-controller
16

1[POWER]
Power indicator.
2[MASTER]
Master fader.
The master fader controls all channels simultaneously.
3[1] … [12]
Channel faders 1 through 12.
The channel faders allow up to twelve DMX channels to be controlled individually. In the device software, assign each
connected DMX devices a channel in accordance with its position in the daisy chain: first device = 1 … last
device = 12.
Connections and controls
DDC-12
17

4[DMX OUT]
DMX output.
5[POWER]
Main switch. Turns the device on and off.
6[DC INPUT]
Connecting socket for power supply unit.
Rear panel
Connections and controls
DMX-controller
18

6 Technical specifications
Output XLR socket, 3-pin
Operating supply voltage 9-V power supply unit
9-V radio battery 6LR61 or 6LF22
Dimensions (W × D × H) 258 mm × 168 mm × 50 mm (15.35in. × 5.31in. × 15.55in.)
Weight 1.2 kg
Technical specifications
DDC-12
19

7 Plug and connection assignment
This chapter will help you select the right cables and plugs to connect your valuable equip‐
ment so that a perfect light experience is guaranteed.
Please take our tips, because especially in ‘Sound & Light’ caution is indicated: Even if a plug
fits into a socket, the result of an incorrect connection may be a destroyed DMX controller, a
short circuit or ‘just’ a not working light show!
The unit offers a 3-pin XLR socket for DMX output and a 3-pin XLR plug for DMX input. Please
refer to the drawing and table below for the pin assignment of a suitable XLR plug.
Pin Configuration
1 Ground, shielding
2 Signal inverted (DMX–, ‘cold signal’)
3 Signal (DMX+, ‘hot signal’)
Introduction
DMX connections
Plug and connection assignment
DMX-controller
20