thomann STAIRVILLE DMX-Master MK II ENC User manual

DMX-Master I,
DMX-Master MK II ENC
DMX controller
user manual

Musikhaus Thomann
Thomann GmbH
Hans-Thomann-Straße 1
96138 Burgebrach
Germany
Telephone: [phone]
E-mail: [email protected]
Internet: www.thomann.de
08.11.2019, ID: 168962, 236071 | SW B3.0V3.3

Table of contents
1 General information................................................................................................................................. 5
1.1 Further information........................................................................................................................... 6
1.2 Notational conventions.................................................................................................................... 7
1.3 Symbols and signal words............................................................................................................... 9
2 Safety instructions.................................................................................................................................. 10
3 Features....................................................................................................................................................... 14
4 Installation.................................................................................................................................................. 16
5 Starting up.................................................................................................................................................. 18
6 Connections and controls................................................................................................................... 19
7 Basics............................................................................................................................................................. 31
8 Operating.................................................................................................................................................... 34
8.1 Introduction....................................................................................................................................... 34
8.2 Enabling programming mode..................................................................................................... 34
8.3 Programming scenes...................................................................................................................... 35
8.4 Programming chase........................................................................................................................ 41
Table of contents
DMX-Master I, DMX-Master MK II ENC
3

8.5 Assigning / reversing DMX channels........................................................................................ 45
8.6 Calling up scenes.............................................................................................................................. 51
8.7 Calling chases.................................................................................................................................... 53
8.8 The MIDI functions........................................................................................................................... 55
8.9 Sending data...................................................................................................................................... 57
8.10 Receiving data................................................................................................................................ 58
9 Technical specications....................................................................................................................... 59
10 Plug and connection assignment.................................................................................................... 61
11 Protecting the environment.............................................................................................................. 63
Table of contents
DMX controller
4

1 General information
This user manual contains important information on the safe operation of the device. Read and
follow all safety notes and all instructions. Save this manual for future reference. Make sure
that it is available to all persons using this device. If you sell the device to another user, be sure
that they also receive this manual.
Our products and user manuals are subject to a process of continuous development. We there‐
fore reserve the right to make changes without notice. Please refer to the latest version of the
user manual which is ready for download under www.thomann.de.
General information
DMX-Master I, DMX-Master MK II ENC
5

1.1 Further information
On our website (www.thomann.de) you will nd lots of further information and details on the
following points:
Download This manual is also available as PDF le for you to download.
Keyword search Use the search function in the electronic version to nd the topics of
interest for you quickly.
Online guides Our online guides provide detailed information on technical basics
and terms.
Personal consultation For personal consultation please contact our technical hotline.
Service If you have any problems with the device the customer service will
gladly assist you.
General information
DMX controller
6

1.2 Notational conventions
This manual uses the following notational conventions:
The letterings for connectors and controls are marked by square brackets and italics.
Examples: [VOLUME] control, [Mono] button.
Texts and values displayed on the device are marked by quotation marks and italics.
Examples: ‘24ch’ , ‘OFF’ .
Letterings
Displays
General information
DMX-Master I, DMX-Master MK II ENC
7

The individual steps of an instruction are numbered consecutively. The result of a step is
indented and highlighted by an arrow.
Example:
1. Switch on the device.
2. Press [Auto].
ðAutomatic operation is started.
3. Switch o the device.
References to other locations in this manual are identied by an arrow and the specied page
number. In the electronic version of the manual, you can click the cross-reference to jump to
the specied location.
Example: See Ä ‘Cross-references’ on page 8.
Instructions
Cross-references
General information
DMX controller
8

1.3 Symbols and signal words
In this section you will nd an overview of the meaning of symbols and signal words that are
used in this manual.
Signal word Meaning
DANGER! This combination of symbol and signal word indicates an
immediate dangerous situation that will result in death or
serious injury if it is not avoided.
NOTICE! This combination of symbol and signal word indicates a pos‐
sible dangerous situation that can result in material and
environmental damage if it is not avoided.
Warning signs Type of danger
Warning – danger zone.
General information
DMX-Master I, DMX-Master MK II ENC
9

2 Safety instructions
This device is used to control spotlights, dimmers, lighting eects equipment, Moving Heads
or other DMX-controlled devices. The device is designed for professional use and is not suit‐
able for use in households. Use the device only as described in this user manual. Any other use
or use under other operating conditions is considered to be improper and may result in per‐
sonal injury or property damage. No liability will be assumed for damages resulting from
improper use.
This device may be used only by persons with sucient physical, sensorial, and intellectual
abilities and having corresponding knowledge and experience. Other persons may use this
device only if they are supervised or instructed by a person who is responsible for their safety.
Intended use
Safety instructions
DMX controller
10

DANGER!
Danger for children
Ensure that plastic bags, packaging, etc. are disposed of properly and are not
within reach of babies and young children. Choking hazard!
Ensure that children do not detach any small parts (e.g. knobs or the like) from
the unit. They could swallow the pieces and choke!
Never let children unattended use electrical devices.
Safety
Safety instructions
DMX-Master I, DMX-Master MK II ENC
11

NOTICE!
External power supply
The device is powered by an external power supply. Before connecting the
external power supply, ensure that the input voltage (AC outlet) matches the
voltage rating of the device and that the AC outlet is protected by a residual cur‐
rent circuit breaker. Failure to do so could result in damage to the device and pos‐
sibly the user.
Unplug the external power supply before electrical storms occur and when the
device is unused for long periods of time to reduce the risk of electric shock or
re.
NOTICE!
Risk of re
Do not block areas of ventilation. Do not install the device near any direct heat
source. Keep the device away from naked ames.
Safety instructions
DMX controller
12

NOTICE!
Operating conditions
This device has been designed for indoor use only. To prevent damage, never
expose the device to any liquid or moisture. Avoid direct sunlight, heavy dirt, and
strong vibrations.
NOTICE!
Possible staining
The plasticiser contained in the rubber feet of this product may possibly react
with the coating of your parquet, linoleum, laminate or PVC oor and after some
time cause permanent dark stains.
In case of doubt, do not put the rubber feet directly on the oor, but use felt-pad
oor protectors or a carpet.
Safety instructions
DMX-Master I, DMX-Master MK II ENC
13

3 Features
Special features of the device:
n192 DMX channels
n12 units with up to 16 DMX channels operable
n30 banks with 8 freely programmable scenes
nSix Chase programmes with up to 240 scenes from 30 banks
nEight faders for manual control
nAll data interchangeable between two units
nAuto programmes (scenes and chases), controlled by Wait Time knob (or Tap Sync) and
Fade Time knob
nStepless fade time setting (0-30 seconds)
nTwo encoder wheels for precise adjustment of PAN and TILT (DMX Master MK-II ENC)
nFine tuning for PAN and TILT
nInverted DMX channels allow reverse output control for the sliders
nAssigned or reversed DMX channel preview
n8 / 16 channel mode for assigned or reversed DMX channels
nBlackout master
nStand-alone mode
Features
DMX controller
14

nManual overriding of scenes in chases
nSound control
nMIDI control for banks, chases and blackout
nLCD
nDMX polarity adjustable
nMemory retention on power failure
nAuto addressing
Features
DMX-Master I, DMX-Master MK II ENC
15

4 Installation
NOTICE!
Possible staining
The plasticiser contained in the rubber feet of this product may possibly react
with the coating of your parquet, linoleum, laminate or PVC oor and after some
time cause permanent dark stains.
In case of doubt, do not put the rubber feet directly on the oor, but use felt-pad
oor protectors or a carpet.
Unpack and carefully check that there is no transportation damage before using the unit. Keep
the equipment packaging. To fully protect the device against vibration, dust and moisture
during transportation or storage use the original packaging or your own packaging material
suitable for transport or storage, respectively.
Installation
DMX controller
16

Wiring diagram for fog
machines
Installation
DMX-Master I, DMX-Master MK II ENC
17

5 Starting up
Establish all connections as long as the unit is switched o. Use the shortest possible high-
quality cables for all connections.
Connect the included power adapter to the 9V connector of the unit and then plug the power
adapter into a wall outlet.
Turn on the device using the main switch on the rear panel. After switching on, the display
briey shows the software version as well as the operating mode and the associated indicator
LED lights up.
Connecting the power adapter
Turning the unit on
Starting up
DMX controller
18

6 Connections and controls
Front panel DMX Master I
Connections and controls
DMX-Master I, DMX-Master MK II ENC
19

Front panel DMX Master MK-II ENC
Connections and controls
DMX controller
20