thomann Stairville LED Pixel Rail Drive640 MKII User manual

LED Pixel Rail Drive
640 MKII
controller
user manual

Musikhaus Thomann
Thomann GmbH
Hans-Thomann-Straße 1
96138 Burgebrach
Germany
Telephone: [phone]
E-mail: [email protected]
Internet: www.thomann.de
12.02.2019, ID: 449740 (V3)

Table of contents
1 General information................................................................................................................................. 5
1.1 Further information........................................................................................................................... 6
1.2 Notational conventions.................................................................................................................... 7
1.3 Symbols and signal words............................................................................................................... 7
2 Safety instructions..................................................................................................................................... 9
3 Features....................................................................................................................................................... 16
4 Installation and starting up................................................................................................................ 17
5 Connections and controls................................................................................................................... 23
6 Operating.................................................................................................................................................... 28
6.1 Menu overview................................................................................................................................. 33
6.2 Functions in 10-channel DMX mode........................................................................................ 34
6.3 Functions in 55-channel DMX mode........................................................................................ 35
6.4 Network connection....................................................................................................................... 36
7 Technical specications....................................................................................................................... 37
8 Plug and connection assignment.................................................................................................... 39
Table of contents
LED Pixel Rail Drive 640 MKII
3

9 Cleaning....................................................................................................................................................... 41
10 Protecting the environment.............................................................................................................. 42
Table of contents
controller
4

1 General information
This user manual contains important information on the safe operation of the device. Read and
follow all safety notes and all instructions. Save this manual for future reference. Make sure
that it is available to all persons using this device. If you sell the device to another user, be sure
that they also receive this manual.
Our products and user manuals are subject to a process of continuous development. We there‐
fore reserve the right to make changes without notice. Please refer to the latest version of the
user manual which is ready for download under www.thomann.de.
General information
LED Pixel Rail Drive 640 MKII
5

1.1 Further information
On our website (www.thomann.de) you will nd lots of further information and details on the
following points:
Download This manual is also available as PDF le for you to download.
Keyword search Use the search function in the electronic version to nd the topics of
interest for you quickly.
Online guides Our online guides provide detailed information on technical basics
and terms.
Personal consultation For personal consultation please contact our technical hotline.
Service If you have any problems with the device the customer service will
gladly assist you.
General information
controller
6

1.2 Notational conventions
This manual uses the following notational conventions:
The letterings for connectors and controls are marked by square brackets and italics.
Examples: [VOLUME] control, [Mono] button.
Texts and values displayed on the device are marked by quotation marks and italics.
Examples: ‘24ch’ , ‘OFF’ .
1.3 Symbols and signal words
In this section you will nd an overview of the meaning of symbols and signal words that are
used in this manual.
Letterings
Displays
General information
LED Pixel Rail Drive 640 MKII
7

Signal word Meaning
DANGER! This combination of symbol and signal word indicates an
immediate dangerous situation that will result in death or
serious injury if it is not avoided.
NOTICE! This combination of symbol and signal word indicates a pos‐
sible dangerous situation that can result in material and
environmental damage if it is not avoided.
Warning signs Type of danger
Warning – high-voltage.
Warning – danger zone.
General information
controller
8

2 Safety instructions
This device is used to control Pixel Rail Strips (item no.: 449739). Use the device only as
described in this user manual. Any other use or use under other operating conditions is consid‐
ered to be improper and may result in personal injury or property damage. No liability will be
assumed for damages resulting from improper use.
This device may be used only by persons with sucient physical, sensorial, and intellectual
abilities and having corresponding knowledge and experience. Other persons may use this
device only if they are supervised or instructed by a person who is responsible for their safety.
DANGER!
Danger for children
Ensure that plastic bags, packaging, etc. are disposed of properly and are not
within reach of babies and young children. Choking hazard!
Ensure that children do not detach any small parts (e.g. knobs or the like) from
the unit. They could swallow the pieces and choke!
Never let children unattended use electrical devices.
Intended use
Safety
Safety instructions
LED Pixel Rail Drive 640 MKII
9

DANGER!
Electric shock caused by high voltages inside
Within the device there are areas where high voltages may be present. Never
remove any covers.
There are no user-serviceable parts inside.
Do not use the device if covers, protectors or optical components are missing or
damaged.
DANGER!
Electric shock caused by short-circuit
Always use proper ready-made insulated mains cabling (power cord) with a pro‐
tective contact plug. Do not modify the mains cable or the plug. Failure to do so
could result in electric shock/death or re. If in doubt, seek advice from a regis‐
tered electrician.
Safety instructions
controller
10

NOTICE!
Risk of re
Do not block areas of ventilation. Do not install the device near any direct heat
source. Keep the device away from naked ames.
Safety instructions
LED Pixel Rail Drive 640 MKII
11

NOTICE!
Operating conditions
This device has been designed for indoor use only. To prevent damage, never
expose the device to any liquid or moisture. Avoid direct sunlight, heavy dirt, and
strong vibrations.
Only operate the device within the ambient conditions specied in the chapter
‘Technical specications’ of this user manual. Avoid heavy temperature uctua‐
tions and do not switch the device on immediately after it was exposed to tem‐
perature uctuations (for example after transport at low outside temperatures).
Dust and dirt inside can damage the unit. When operated in harmful ambient
conditions (dust, smoke, nicotine, fog, etc.), the unit should be maintained by
qualied service personnel at regular intervals to prevent overheating and other
malfunction.
Safety instructions
controller
12

NOTICE!
Power supply
Before connecting the device, ensure that the input voltage (AC outlet) matches
the voltage rating of the device and that the AC outlet is protected by a residual
current circuit breaker. Failure to do so could result in damage to the device and
possibly injure the user.
Unplug the device before electrical storms occur and when it is unused for long
periods of time to reduce the risk of electric shock or re.
NOTICE!
Possible damage due to installation of a wrong fuse
The use of dierent types of fuses can cause serious damage to the unit. Fire
hazard!
Only fuses of the same type may be used.
Safety instructions
LED Pixel Rail Drive 640 MKII
13

NOTICE!
Possible staining
The plasticiser contained in the rubber feet of this product may possibly react
with the coating of your parquet, linoleum, laminate or PVC oor and after some
time cause permanent dark stains.
In case of doubt, do not put the rubber feet directly on the oor, but use felt-pad
oor protectors or a carpet.
NOTICE!
Wiring
Follow the wiring instructions in this manual.
Safety instructions
controller
14

NOTICE!
Compatible devices
The device may only be used with Stairville Pixel Rail 40 RGB MKII (item no.
449739).
Safety instructions
LED Pixel Rail Drive 640 MKII
15

3 Features
nController for up to 16 pixel rail strips (maximum four per output) of the type
Stairville LED Pixel Rail 40 RGB MKII (Item no.: 449739)
nControl protocols: DMX (10/55 channels), ArtNet (4x480 channels), RDM
nOperating modes: Stand Alone (30 programmes), Master / slave
nIn and outputs: DMX, RJ45 (ArtNet)
nOperating via buttons and display on the unit
nLockable connections (Power Twist) for self-supply and to supply further devices
nConvection cooling
nRobust die-cast aluminium housing, black
Features
controller
16

4 Installation and starting up
Unpack and check carefully there is no transportation damage before using the unit. Keep the
equipment packaging. To fully protect the product against vibration, dust and moisture during
transportation or storage use the original packaging or your own packaging material suitable
for transport or storage, respectively.
The device has two lateral attachment lugs each with two slots for wall or ceiling mounting
(mounting hardware not included).
Make sure that the installation complies with the standards and rules that apply in your
country.
Connect the units to be controlled via suitable DMX or RJ45 data cable to the device. A max‐
imum of 30 additional DMX devices may be serially connected to each serial port.
Create all connections while the device is o. Use the shortest possible high-quality cables for
all connections. Take care when running the cables to prevent tripping hazards.
Installation and starting up
LED Pixel Rail Drive 640 MKII
17

The following gures show the connection conguration of the pixel strips in the various oper‐
ating modes.
Connection examples
Master / Slave operation
Installation and starting up
controller
18

Control via ArtNet
Installation and starting up
LED Pixel Rail Drive 640 MKII
19

Control via DMX
Installation and starting up
controller
20