THORLABS TTR001 User manual

HA0290T
TTR001(/M)
Tip Tilt Rotation Stage
User Guide
Original Instructions

Page 0 25069-D02
TTR001 Tip Tilt Rotation Stage
Contents
Chaper 1 Overview ..................................................................................................... 1
1.1 Introduction ........................................................................................ 1
Chaper 2 Safety .......................................................................................................... 2
2.1 Safety Information ............................................................................. 2
Chaper 3 Operation and Maintenance ...................................................................... 3
Chaper 4 Specifications ............................................................................................. 4
Chaper 5 Thorlabs Worldwide Contacts .................................................................. 5

Rev C Dec 2018 Page 1
Chapter 1 Overview
Chapter 1 Overview
1.1 Introduction
The TTR001(/M) Tilt and Rotation Stage provides ±5° uncoupled tilt adjustment in
pitch and roll, together with ±10° rotation (yaw) adjustment. These adjustments allow
optical components and fixtures to be aligned with a plane, and then rotated within
that plane.
High-resolution Mitutoyo micrometers provide a minimum incremental movement of
5 arcsec. Preload can be adjusted to minimize backlash, and motion can also be
locked by a simple screw adjustment.
Fig. 1.1 TTR001 with Prism
Mounting plates (TTR001SP1) are available to raise the deck height to 62.5 mm
(2.46”), making it compatible with our MBT, MAX and RB13 series stages.
Caution
The stage is only suitable for horizontal mounting and operation.

Page 2
TTR001 Tip Tilt Rotation Stage
Chapter 2 Safety
2.1 Safety Information
For the continuing safety of the operators of this equipment, and the protection of the
equipment itself, the operator should takenote of the Warnings, Cautions and Notes
throughout this handbook and, where visible, on the product itself.
The following safety symbols may be used throughout the handbook and on the
equipment itself.
Warning: Risk of Electrical Shock
Given when there is a risk of injury from electrical shock.
Warning
Given when there is a risk of injury to users.
Caution
Given when there is a risk of damage to the product.
Note
Clarification of an instruction or additional information.

Rev C Dec 2018 Page 3
Chapter 3 Operation and Maintenance
Chapter 3 Operation and Maintenance
The Roll, Pitch and Yaw micrometers are marked with a 0.001” (10 µm) vernier scale.
Turning the micrometers gives 1.5° of rotation and 1.78° of tilt per revolution. The
preload is adjustable by turning the Tension/Lock screw for each axis as shown
below.
Fig. 3.2 Tension/Lock Screw Positions
Pitch and Roll Tension/Lock Screw
Yaw Tension/Lock Screw

Page 4 25069-D02
TTR001 Tip Tilt Rotation Stage
Chapter 4 Specifications
*at max preload
Specification TTR001
Deck Height 37.5 mm
Backlash 5 arcsec*
Min. Incremental Movement 5 arcsec
Load Capacity 11.2 lb (5.0 kg)
Tilt Adjustment Range ±5° in Pitch and Roll
Rotation Adjustment Range ±10°

Rev C Dec 2018 Page 5
Chapter 5 Thorlabs Worldwide Contacts
Chapter 5 Thorlabs Worldwide Contacts
For technical support or sales inquiries, please visit us at
www.thorlabs.com/contact for our most up-to-date contact information.
USA, Canada, and South America
Thorlabs, Inc.
sa[email protected]
[email protected]
Europe
Thorlabs GmbH
[email protected]
France
Thorlabs SAS
[email protected]
Japan
Thorlabs Japan, Inc.
[email protected]
UK and Ireland
Thorlabs Ltd.
[email protected]
[email protected]
Scandinavia
Thorlabs Sweden AB
[email protected]
Brazil
Thorlabs Vendas de Fotônicos Ltda.
[email protected]
China
Thorlabs China
[email protected]

www.thorlabs.com