Thrane&Thrane FBB_Ip User manual

QUICK GUIDE
IP HANDSET, WIRED
CONNECT THE IP HANDSET
To connect the wired handset to a BGAN terminal, do
as follows:
1. Start up the BGAN terminal and your IP handset.
2. Connect the LAN cable from the cradle to one of the
LAN connectors on the BGAN terminal.
If the handset has been connected to the BGAN
terminal before, it automatically establishes a
connection. If not, proceed to the next section.
CONNECT TO A BGAN TERMINAL
If needed, enter the SIM PIN for the terminal.
Note: You only need to enter the PIN if the use of PIN
is enabled in the BGAN terminal and the PIN has not
yet been entered.
1. To enter the PIN, access the menu system of the
handset and select BGAN > ENTER PIN. This menu
item is only available when the connected terminal
is waiting for a PIN.
2. Enter the user name and password for your
terminal. (Default user name: admin; default
password: 1234).
3. Enter the SIM PIN for the terminal.
HANDSET USER NAME AND PASSWORD
If it is the first IP handset that connects to the BGAN
terminal, the handset starts up automatically and is
assigned the user name 0501, password 0501 and local
number 0501.
If another IP handset has already been connected, you
must set up the user name and password in the web
interface of the BGAN terminal as well as in the IP
handset the first time you connect to the BGAN
terminal. For information on how to enter user name
and password, refer to the user manual.
When the top right corner of the handset display
shows the handset is ready for use.
MAKE A VOICE CALL
To make a call from your IP handset using the BGAN
terminal, do as follows:
Y
Z

BGAN
Register ed
Profile 2
Not in use
Profile 3
Not in use
Missed calls
Received calls
Dialled numbers
Manage
Main menu
Phone identification
Network information
Software version
Sound
Stealth
Call services
Cradle
Display
Web server
Date and time
Language
Factory default
Settings
Noise cancellation
Automatic secure
Use BGAN time
Time
Date
Format (12/24h)
Time zone
Active backlight (%)
Standby backlight (%)
Screensaver
Transparency
Automatic day/night
Ringing tone
Tones volume
Keypad click
Suppress audio
Suppress backlight
Use stealth
Automatic IP(DHCP)
GPS position
Status
CNo (signal strength)
PIN status
Answer when lifted
Terminal type
Terminal SW version
User Group
Gr oup nam e
Profile A
Active
Profile B
Inactive
Main Options
Call log
Contacts
Status
Network
Settings
SIP
BGAN
Connect (0501 only)
Status
Properties
Enter PIN code *
Active alarms **
Hold/Switch *
Transfer *
Handsfree *
Microphone mute *
Lock keypad
Stealth mode
Night colours
Go secure
* for active calls
* if needed / ** if any
98-127468-C
DISPLAY
MENUS
•Dial00 <country code> <phone number> .
Example: Thrane & Thrane A/S in Denmark: 00 45
39558800 .
MAKE A LOCAL CALL
To make local calls between phones connected to the
same terminal, do as follows:
• For a local call to an IP handset, dial the number of
the IP handset (e.g. 0501) followed by #or .
• For a local call to an ISDN phone, dial 0401 or 0402
followed by #or .
• For a local call to an analog phone, dial 0301 or
0302 followed by #or .
TRANSFER A CALL
To transfer a call to a phone connected to the same
terminal, do as follows:
1. After taking the call, press Options.
2. Select Transfer.
3. Enter the number or select it from the contact list.
4. Press Transfer.
START OR STOP A DATA CONNECTION (0501 ONLY)
To start a background data or streaming connection,
do as follows:
1. From the Main menu select BGAN.
2. Select Connect.
3. Select the User group and the Profile.
4. Press Start to activate or Stop deactivate the
connection.
ACCESS THE WEB INTERFACE
To access the built-in web interface of the handset, do
as follows:
1. Connect a computer to one of the LAN interfaces in
the BGAN terminal.
2. On the computer, start up your browser and enter
the IP address of the handset. You find the IP
address in the handset menus under Status >
Network information.
The web interface of the handset opens and you can
access the internal settings of the handset.
b
b
b
b
b