TIE DOWN 70853 User manual

404-344-0000 • www.tiedown.com
605 Stonehill Drive SW, Atlanta, GA 30336
[email protected]
Instructions #08346 (E1762 - Rev. 5/29/20)
Collapsible Guardrail
Assembly Instructions
www.tiedown.com
On Line
Instructions
Zip Base
Safety Pin
Lock the guardrail in place
by securing with two
safety pins
Guardrail
Collapsible Bracket
with Safety Pins
Step 1
Place the Collapsible Bracket in the outside post on the
zip base. Secure with safety Pin.
Remove the two safety pins from the collapsible bracket.
Step 2
Place the guardrail into the collapsible
bracket. Align the guardrails with
holes on the collapsible bracket holes.
Secure the guardrail by replacing the
two safety pins

www.tiedown.com
ISO 9001:2015 Certification
Intellectual property of TIE DOWN Inc.
©2020 TIE DOWN, Inc.
Instruction #08346 (E1762 Rev. 5/29/20)
Safety Products Division
605 Stonehill Drive SW
Atlanta, Georgia 30336
800-241-1806 • 404-344-0000
Collapsible Guardrail
Assembly Instructions
Remove both
safety pins
Lowering the Guardrail
Step 1
Remove both safety pins on the ends
of the guardrail.
Lower the guardrail 90 degrees,
resting on the surface.
Lowering the Guardrail
Step 2
Replace the lower safety pin by
aligning the guardrail holes with the
collapsible bracket holes.
Replace the upper safety pin.
Replace the upper
safety pin
Align guardrail and
bracket holes, replace
lower safety pin