Timeguard E269H-Synchronous Manual

Installation & Operating Instructions
20 Amp Electronic
24 Hour/7 Day
Time Controller
Model: E269H – Synchronous
11 Manual Control (Override)
The manual control is automatically annulled by the following
counteracting command of the automatic program sequence.

1 2
2 Surface Mounting
Lift the transparent cover off and remove the two screws.
Pull the clock body and then the terminal cover from the base.
Mount the base and connect from the diagram.
Flush Mounting
Cut panel opening 66 x 66mm, remove switch from base as above
connect from diagram. Mount on panel using bracket and two
knurled screws provided.
1 Fixing Instructions
Type Dials Power Reserve Switch Period Min Switching Contact Rating
E269H 24hr/7 day – 5 min/30 min 20 min/2hr 20(12)A

2 3
3 Circuit Diagrams – E269H
2 Surface Mounting
Lift the transparent cover off and remove the two screws.
Pull the clock body and then the terminal cover from the base.
Mount the base and connect from the diagram.
Flush Mounting
Cut panel opening 66 x 66mm, remove switch from base as above
connect from diagram. Mount on panel using bracket and two
knurled screws provided.
1 Fixing Instructions
4 Set Clock
Turn the hands of the clock either clockwise or anticlockwise to the correct time.
9.00
21.00

3 4
3 Circuit Diagrams – E269H 5 24 Hour Operation
SET SWITCHING TIME – lift off transparent cover and insert the
switching riders to the required position using red for ON and blue for OFF.
6 24 Hour ➔ 7 Day Programme
0
1 1

4
7 7 Day Programme
8 7 Day Operation
1 Lift off transparent cover and the outer ring to expose the yellow and
green circumferential bands around the clock face. The yellow refers
to 7 day movement,
2 Turn the clock hand either clockwise or anticlockwise to line up the slots
between the green and yellow bands.
3 Slide the silver pin to the yellow band.
4 Replace the outer ring in reverse locating the silver pin into any of the
recesses provided on the ring. The slots on the timing will also engage
into the raised edges provided.
5 You may align the days to suit, i.e. I = Monday, II = Tuesday etc.
6 SET SWITCHING TIME – Insert the switching riders to the required
position using red for ON and blue for OFF.
9 7 Day ➔ 24 Hour Programme
6 24 Hour ➔ 7 Day Programme
1
0

5 6
10 Programme Auto Manual
3.43.236 (Red) 3.43.237 (Blue)

6
10 Programme Auto Manual
11 Manual Control (Override)
The manual control is automatically annulled by the following
counteracting command of the automatic program sequence.
12 Permanent Control ON/OFF
Set the hand lever to “Perm” = permanent control; turning the control
axis 1 in direction of arrow, the required permanent control ON
and OFF can now be adjusted.
Turning the hand lever to “Auto” = Automatic control, the permanent
control is terminated. The actual switch position is maintained until the
next counteracting command of the automatic program sequence
is triggered. An immediate correction can be carried out by means
of the manual control (override control)
Replace transparent cover.
EU Directives: Conforms to latest directives.
Permanent ON/OFF
3.43.237 (Blue)
1
2

Zerofour – June 2015
67-056-65 (Issue 4)
Timeguard Limited.
Victory Park, 400 Edgware Road, London NW2 6ND
Sales Office: 020 8452 1112
or email [e-mail]
For a product brochure please contact:
HELPLINE
020 8450 0515
or email [e-mail]
www.timeguard.com
3 Year Guarantee
In the unlikely event of this product becoming faulty due to defective
material or manufacture within 3 years of the date of purchase,
please return it to your supplier in the first year with proof of purchase
and it will be replaced free of charge. For years 2 and 3 or any difficulty
in the first year telephone the helpline on 020 8450 0515.
Note: A proof of purchase is required in all cases. For all eligible replacements
(where agreed by Timeguard) the customer is responsible for all shipping/postage
charges outside of the UK. All shipping costs are to be paid in advance before
a replacement is sent.