Timex M594 User manual

TIMEX
WATCH OPERATION GUIDE
TIMEX CONFIDENTIAL PROPRIETARY INFORMATION
Quality Control
Page 1 of 6
Model No(s):
M594 / M657
M892
Part Name:
WATCH HEAD
Doc. No./Rev.:
20170304
Prepared by:
GAstida / HJSagun
Approved by:
Reviewed by:
ACCabasan
DGriffith
M594-M657-M892 Watch Operation Guide Doc. No./Rev. 20170304
1.0 PURPOSE:
To provide Customer Service Centers with procedures on how to operate and set-up Model 594, M657 and M892.
Features
Dated Training Logs with Best, Lap, Average Lap and
Total Time
2 Time Zone settings
3 Customizable Alarms:
Daily/Weekday/Weekend/Weekly options, 5-min
back-up
2 Interval Timers settable for up to 24-hours:
Countdown/Stop (CS) and Countdown/Repeat (CR)
Chronograph
Lap storage
Workout recall by date
Average/best time display
On-the-fly lap recall
Elapsed time counter
50-lap memory
Indiglo night-light with Night-Mode feature
SET/RECALL
(DONE)
MODE
(NEXT)
INDIGLO
STOP/RESET
(-)
START/SPLIT
(+)
SET/RECALL
(DONE)
MODE
(NEXT)
INDIGLO
STOP/RESET
(-)
START/SPLIT
(+)
M594
M657
M892
SET/RECALL
(DONE)
MODE
(NEXT)
INDIGLO
STOP/RESET
(-)
START/SPLIT
(+)

TIMEX
WATCH OPERATION GUIDE
TIMEX CONFIDENTIAL PROPRIETARY INFORMATION
Quality Control
Page 2 of 6
Model No(s):
M594 / M657
M892
Part Name:
WATCH HEAD
Doc. No./Rev.:
20170304
Prepared by:
GAstida / HJSagun
Approved by:
Reviewed by:
ACCabasan
DGriffith
M594-M657-M892 Watch Operation Guide Doc. No./Rev. 20170304
2.0 WATCH OPERATION AND SET-UP
2.1 INDIGLO AND NIGHT-Mode
a. Press INDIGLO button once to activate the feature.
The digital display will illuminate for two seconds.
b. Press and hold INDIGLO button for four seconds to turn Night-Mode on or off.
Note: Moon symbol on the watch display indicates Night-Mode is on.
When watch is in Night-Mode, Indiglo can be activated by pressing any of the watch buttons.
2.2 TIME-OF-DAY
a. Press and hold SET/RECALL button to set the Time-of-Day. Time Zone flashes.
b. Press START/SPLIT (+) or STOP/RESET (-) button to select between time zones (TIME 1 or TIME 2).
c. Press MODE (NEXT) button. Hour flashes. Press START/SPLIT (+) or STOP/RESET (-) button to change hour
(including AM/PM); hold to scan values.
d. Press MODE (NEXT) Minutes flashes. Press START/SPLIT (+) or STOP/RESET (-) button to change minutes
e. Press MODE (NEXT) Seconds flashes. Press START/SPLIT (+) or STOP/RESET (-) button to set seconds to zero.
f. Press MODE (NEXT) Day flashes. Press START/SPLIT (+) or STOP/RESET (-) button to change day of week.
g. Press MODE (NEXT) Month flashes. Press START/SPLIT (+) or STOP/RESET (-) button to change month.
h. Press MODE (NEXT) Day flashes. Press START/SPLIT (+) or STOP/RESET (-) button to change date.
i. Press START/SPLIT (+) or STOP/RESET (-) button to change value and then press MODE (NEXT) to go to the next
option. Available options are:
a. 12-hour or 24-hour format.
b. Month-Day or Day-Month (MM-DD or DD-MM) format.
c. Hourly CHIME turn ON or OFF.
d. Beep turn ON or OFF. If you select Beep “ON,”beep will sound every time you push a button except
INDIGLO button.
j. Press MODE (NEXT) to set second Time Zone, following procedure above.
k. Press SET/RECALL (DONE) at any step to exit and save settings.
Change Second Time Zone:
a. Press START/SPLIT once briefly to peek at 2nd time zone.
b. Continue to hold button for 4 seconds to switch to displayed time zone.

TIMEX
WATCH OPERATION GUIDE
TIMEX CONFIDENTIAL PROPRIETARY INFORMATION
Quality Control
Page 3 of 6
Model No(s):
M594 / M657
M892
Part Name:
WATCH HEAD
Doc. No./Rev.:
20170304
Prepared by:
GAstida / HJSagun
Approved by:
Reviewed by:
ACCabasan
DGriffith
M594-M657-M892 Watch Operation Guide Doc. No./Rev. 20170304
2.3 CHRONOGRAPH
Chronograph Set-Up: This determines what is shown in first and second Lines of the display.
a. Press MODE button until CHRONO appears.
b. Press and hold SET/RECALL button.
a. If no workouts have been stored, display will read FORMAT then SET.
b. If workouts have been stored, last workout will be displayed.
c. Press MODE (NEXT) until format display appears.
d. Press START/SPLIT (+) or STOP/RESET (-) button to select LAP/SPL (Split in large digits), SPL/LAP (Lap in large
digits), TOTAL RUN.
e. Press SET/RECALL button to exit.
NOTE:
TOTAL RUN format allow you to view total elapsed time and total activity time (total activity time = total elapsed time –
time paused during workout).
Every time you pause/stop during your workout. Primary display will show time elapsed less paused time (total activity
time). Lower display will continue to run, showed total elapsed time since Chrono was started.
Press STOP/RESET to stop timing.
oPress and hold STOP/RESET to clear or reset
Press and hold SET/RECALL to store
oWhen recalling TOTAL RUN, only total activity time will be displayed.
If you take a split, display will change to SPL/LAP, Elapsed time is not stored in memory.
Chronograph Operation:
a. Press MODE button until CHRONO appears.
b. Press START/SPLIT button to start CHRONO. Chrono continues to run if you exit the mode.
c. Press START/SPLIT button to take a Split.
a. Lap number alternates with last two digits of display.
b. Display will freeze for 10 seconds. Press MODE button to release display and see running Chrono.
d. Press STOP/RESET button to stop or pause CHRONO. Press START/SPLIT button to resume.
e. When workout is completed, you have two options:
a. Press and hold SET/RECALL button to store workout.
b. Press and hold STOP/RESET button to clear workout (both reset chrono to 00:00:00).
NOTES:
When storing a workout, display will indicate available free memory (number of laps remaining to be stored. Each
workout stored equals number of laps taken plus one extra lap to store total workout time) or MEMORY FULL.
If there is insufficient memory to store entire workout, total time, date, and the oldest laps will be stored up to
remaining capacity.

TIMEX
WATCH OPERATION GUIDE
TIMEX CONFIDENTIAL PROPRIETARY INFORMATION
Quality Control
Page 4 of 6
Model No(s):
M594 / M657
M892
Part Name:
WATCH HEAD
Doc. No./Rev.:
20170304
Prepared by:
GAstida / HJSagun
Approved by:
Reviewed by:
ACCabasan
DGriffith
M594-M657-M892 Watch Operation Guide Doc. No./Rev. 20170304
Recall Workouts:
a. Press MODE button until CHRONO appears.
b. Press SET/RECALL button to enter recall mode. Date of last workout flashes.
c. Press START/SPLIT (+) or STOP/RESET (-) button to choose workout to view. Workouts are stored by date.
Multiple workouts maybe stored on same date.
d. Press MODE (NEXT) to enter work out details.
e. Press START/SPLIT (+) or STOP/RESET (-) button to review Lap/Split times of successive laps, BEST lap, AVG lap.
f. To review other workouts, press MODE (NEXT) until date flashes then follow steps b to e.
g. Press SET/RECALL (DONE) to exit.
NOTE: To view lap/split times of current workout, while Chrono is running, press SET/RECALL and START/SPLIT (+) or
STOP/RESET (-) button to scroll through lap/split times, BEST lap, AVG lap. Current lap will not be shown. No other
workouts can be viewed while Chrono is running.
Clear Workouts:
a. With Chrono stopped, press and hold STOP/RESET button. HOLD TO CLEAR LAST WORKOUT appears.
b. Watch will beep. Last stored workout is erased from memory.
c. To clear all workouts, continue to hold STOP/RESET button. HOLD TO CLEAR CHRONO MEM appears. Watch
beeps a second time to indicate all stored workouts are erased. MEMORY 50 will be displayed.
2.4 TIMER
Timer Set-Up:
a. Press MODE button until TIMER appears.
b. Press SET/RECALL button. Hour digits flash.
c. Press START/SPLIT (+) or STOP/RESET (-) button to increase or decrease HOUR.
d. Press MODE (NEXT) button and press START/SPLIT (+) or STOP/RESET (-) button to set minutes.
e. Press MODE (NEXT) button and press START/SPLIT (+) or STOP/RESET (-) button to set seconds.
f. Press MODE (NEXT) button and press START/SPLIT (+) or STOP/RESET (-) button to select STOP AT END or
REPEAT AT END.
g. Press SET/RECALL (DONE) button to confirm and exit.
Timer Operation:
a. Press MODE button until TIMER appears.
b. Press START/SPLIT button to start TIMER. Timer will continue to run if you exit Timer mode.
An alarm melody chimes when Timer reaches zero or before it starts to countdown again.
c. Press STOP/RESET button to stop TIMER. Press again to reset.
NOTE:
For repeat Timer operation, repetition number appears at top right of screen in both countdown and interval timers.
Maximum number of repeats is 99.

TIMEX
WATCH OPERATION GUIDE
TIMEX CONFIDENTIAL PROPRIETARY INFORMATION
Quality Control
Page 5 of 6
Model No(s):
M594 / M657
M892
Part Name:
WATCH HEAD
Doc. No./Rev.:
20170304
Prepared by:
GAstida / HJSagun
Approved by:
Reviewed by:
ACCabasan
DGriffith
M594-M657-M892 Watch Operation Guide Doc. No./Rev. 20170304
2.5 INTERVAL TIMER
You can set two Timers that countdown in sequence.
Interval Timer Set-Up:
a. Press MODE button until INTTMR appears.
b. Press SET/RECALL button. INT 1 flashes.
c. Press MODE (NEXT) button. Hour digits flash.
d. Press START/SPLIT (+) or STOP/RESET (-) button to increase or decrease HOUR.
e. Press MODE (NEXT) button and press START/SPLIT (+) or STOP/RESET (-) button to set minutes.
f. Press MODE (NEXT) button and press START/SPLIT (+) or STOP/RESET (-) button to set seconds.
g. Press MODE (NEXT) button and press START/SPLIT (+) or STOP/RESET (-) button to select STOP AT END or
REPEAT AT END.
h. When return to INT 1, press START/SPLIT (+) or STOP/RESET (-) button to change to INT 2 (Interval 2).
i. Press MODE (NEXT) button then follow steps c to g.
j. Press SET/RECALL (DONE) button to confirm and exit.
Interval Timer Operation:
a. Press MODE button until INTTMR appears.
b. Press START/SPLIT button to start INTERVAL TIMER.
c. Press STOP/RESET button to stop INTERVAL TIMER.
d. Press and hold STOP/RESET button to reset INTERVAL TIMER to pre-set value.
e. Press MODE button to exit TIMER mode and return to Time-of-Day display.
NOTE:
When first countdown is complete, Timer proceeds to the next non-zero interval that is set. INDIGLO night-light flashes
and beep sounds between each interval.
If you set both Timers in interval Timer to repeat, Timer will countdown both intervals and then repeat the entire
sequence.

TIMEX
WATCH OPERATION GUIDE
TIMEX CONFIDENTIAL PROPRIETARY INFORMATION
Quality Control
Page 6 of 6
Model No(s):
M594 / M657
M892
Part Name:
WATCH HEAD
Doc. No./Rev.:
20170304
Prepared by:
GAstida / HJSagun
Approved by:
Reviewed by:
ACCabasan
DGriffith
M594-M657-M892 Watch Operation Guide Doc. No./Rev. 20170304
2.6 ALARM
Alarm Set-Up:
a. Press MODE button until ALM 1 appears.
b. Press SET/RECALL button to set ALARM. Hour digit flash.
c. Press START/SPLIT (+) or STOP/RESET (-) button to change HOUR
d. Press MODE (NEXT) button and press START/SPLIT (+) or STOP/RESET (-) button to set minutes.
e. Press MODE (NEXT) button and press START/SPLIT (+) or STOP/RESET (-) button to set AM or PM.
f. Press MODE (NEXT) button and press START/SPLIT (+) or STOP/RESET (-) button to select DAILY, WKDAYS,
WKENDS, or day of the week (weekly alarm).
g. Press SET/RECALL (DONE) button to exit and save settings.
h. Press START/SPLIT or STOP/RESET button to turn Alarm ON or OFF.
i. To set remaining alarms, press MODE for ALM2 and ALM 3 and set as above.
Alarm Activation/Deactivation:
a. Press MODE button until ALM 1 or ALM 2 or ALM 3 appears.
b. Press START/SPLIT or STOP/RESET button to turn Alarm ON or OFF.
c. Press MODE button to exit ALARM mode and return to Time-of-Day display.
NOTE:
When alarm goes off, INDIGLO night-light and alarm icon flash and alert sounds. Press any button to silence.
If no button is pushed, alert will cease after 20 seconds and Backup Alarm will activate after 5 minutes.