Titan Fitness LEGPRS1 User manual

LEG PRESS HACK SQUAT MACHINE
LEGPRS1-LEGPRS2-LEGPRS3
400698
Operator’s Manual
Read the Operator’s Manual entirely. When you see this
symbol, the subsequent instructions and warnings are
serious follow without exception. Your life and the lives
of others depend on it!

2
PARTS DIAGRAM / EXPLODED VIEW
KEY BOX DESCRIPTION QTY KEY BOX DESCRIPTION QTY
(1) 2 REAR BASE FRAME 1 (38) 2&3 BUMPER 77*47.5*13 4
(2) 1 REAR UPRIGHT FRAME 1 (39) 1 STOPPER 30*70*20 2
(3) 1 MIDDLE BASE FRAME 1 (40) 2&3 END CAP 4
(4) 3 RIGHT CONNECTING FRAME 1 (41) 2 BUSHING 14
(5) 3 LEFT CONNECTING FRAME 1 (42) 2 KNOB 2
(6) 1 UPPER CROSS GRAME 1 (43) 2 BASE MAT 3
(7) 1 ADJUSTING FRAME 1 (44) 1 PIN SLEEVE 1
(8) 3 BACK PAD SUPPORT FRAME 1 (45) 1 PIN SHAFT 12*80*M8 1
(9) 3 ADJUSTING TUBE 1 (46) 2 SPRING 2
(10) 2 DIAGONAL BRACING 1 (47) 1 HOLLOW SLEEVE 1
(11) 3 WEIGHT PALTE HOLDER 1 (48) 1 BUSHING 4

3
(12) 2 PEDAL 1 (49) 1 STOPPER 32*25*50 6
(13) 2 R HANDLEBAR FRAME 1 (50) 1 RUBBER BUMPER 38*7*15 4
(14) 2 L HANDLEBAR FRAME 1 (51) 2 FRONT HANDLE SLEEVE 8
(15) 1 R LIMITED FRAME 1 (52) 2 END CAP 3
(16) 1 L LIMITED FRAME 1 (53) 2 END CAP F32*2 4
(17) 1 R SIDE FRAME 1 (54) 2 SOCKET CAO SCREW M6*10 21
(18) 1 L SIDE FRAME 1 (55) 2 FKAT WASHER 11*20*2 93
(19) 3 BACK PAD SWING FRAME 1 (56) 2 FLAT WASHER 13.5*24*2.5 14
(20) 1 SEAT PAD CONNECT FRAME 1 (57) 2 NUT M10 30
(21) 2 SLIDING FRAME 1 (58) 2 NUT M12 7
(22) 2 R SIDE HANDLE FRAME 1 (59) 2 HEX BOLT M10*95 4
(23) 2 L SIDE HANDLE FRAME 1 (60) 2 HEX BOLT M10*25 29
(24) 2 PIN SHIFT 1 (61) 2 HEX BOLT M10*15 4
(25) 2 WHEEL 100*26 4 (62) 2 HEX BOLT M10*125 2
(26) 2 RUBBER SILENCING WHEEL 4 (63) 2 HEX BOLT M10*120 2
(27) 3 WAIST PAD 1 (64) 2 HEX BOLT M10*70 10
(28) 2 BACK PAD 1 (65) 2 HEX BOLT M10*30 4
(29) 3 SHOULDER PAD 2 (66) 2 HEX BOLT M10*75 4
(30) 1 SEAT PAD 1 (67) 2 HEX BOLT M10*65 4
(31) 1 BACK PAD 1 (68) 2&3 HEX BOLT M12*65 4
(32) 1&2 LONG BASE PLATE 5 (69) 1&3 HEX BOLT M12*115 3
(33) 3 SHORT BASE PLATE 2 (70) 2 PAN HEAD SCREW M5*10 6
(34) 2 SLEEVE 8 (71) 1 HEX BOLT M8*15 4
(35) 2 END CAP 50*2 6 (72) 1 PAN HEAD SCREW M6*10 4
(36) 2 CICLIP 4 (73) 2
PAN HEAD HEX BOLT
M10*55
4
(37) 2 FIXING FRAME 2

4
ASSEMBLY INSTRUCTIONS
STEP 1
Assemble RIGHT & LEFT CONNECTING FRAME (4 & 5) and MIDDLE BASE FRAME (3)
using FLAT WASHER Φ11*Φ20*2 (55), NUT M10 (57) and HEX BOLT M10*95 (59).
Install REAR UPRIGHT FRAME (2) and MIDDLE BASE FRAME (3) to REAR BASE FRAME
(1), using FLAT WASHER Φ11*Φ20*2 (55), NUT M10 (57), HEX BOLT M10*95 (59), and
HEX BOLT M10*25 (60).
PLEASE DON’T TIGHTEN ALL BOLTS.

5
ASSEMBLY INSTRUCTIONS
STEP 2
Assemble RIGHT &LEFT SIDE HANDLE FRAME (22 & 23) and RIGHT & LEFT CONNECTING
FRAME (4 & 5) using FLAT WASHER Φ11*Φ20*2 (55), NUT M10 (57) and HEX BOLT M10*70
(64).
Assemble UPPER CROSS FRAME (6) and REAR UPRIGHT FRAME (2), using FLAT WASHER
Φ11*Φ20*2 (55), NUT M10 (57), HEX BOLT M10*120 (63), and HEX BOLT M10*70 (64).
PLEASE DON’T TIGHTEN ALL BOLTS.

6
ASSEMBLY INSTRUCTIONS
STEP 3
Assemble RIGHT & LEFT SIDE FRAME (17 & 18), SEAT PAD CONNECT FRAME (20) and UPPER
CROSS FRAME (6) using FLAT WASHER Φ11*Φ20*2 (55), NUT M10 (57), HEX BOLT M10*25
(60), HEX BOLT M10*75 (66), and HEX BOLT M10*120 (63).
THEN TIGHTEN ALL BOLTS

7
ASSEMBLY INSTRUCTIONS
STEP 4
The RIGHT & LEFT LIMITED FRAME (15 & 16) through the hole on RIGHT & LEFT SIDE FRAME
(17 & 18). Then insert it into the FIXING FRAME (37) using FLAT WASHER Φ11*Φ20*2 (55), and
HEX BOLT M10*15 (61).

8
ASSEMBLY INSTRUCTIONS
STEP 5
Assemble RIGHT & LEFT HANDLEBAR FRAME (13 & 14), and SLIDING FRAME (21), using
FLAT WASHER Φ11*Φ20*2 (55), HEX BOLT M10*25 (60), and HEX BOLT M10*75 (66).
THEN TIGHTEN ALL BOLTS.

9
ASSEMBLY INSTRUCTIONS
STEP 6
Assemble DIAGONAL BRACING (10), WEIGHT PLATE HOLDER (11), and SLIDING FRAME (21)
using FLAT WASHER Φ11*Φ20*2 (55), NUT M10 (57), HEX BOLT M10*15 (61), and HEX BOLT
M10*30 (65) as shown.

10
ASSEMBLY INSTRUCTIONS
STEP 7
Install BACK PAD FRAME (8) TO MIDDLE BASE FRAME (3) using FLAT WASHER Φ13.5*Φ24*2.5
(56), NUT M12 (58), and HEX BOLT M12*65 (68).
PLEASE TIGHTEN ALL BOLTS.

11
ASSEMBLY INSTRUCTIONS
STEP 8
Assemble WAIST PAD (27), BACK PAD (28), SHOULDER PAD (29), SEAT PAD (30) and BACK
PAD (31) as shown using FLAT WASHER Φ11*Φ20*2 (55), HEX BOLT M10*25 (60), and PAN
HEAD, HEX BOLT M10*55 (73).
THEN TIGHTEN ALL BOLTS.

12
ACKNOWLEDGEMENT OF RISK AND RELEASE OF LIABILITY
The use of any equipment, including this one, involves the potential risk of injury. Apart from any warranty
claim that might be presented for a claimed defect in material or workmanship of the product, you accept
and assume full responsibility for any and all injuries, damages (both economic and non-economic), and
losses of any type, which may occur, and you fully and forever release and discharge Titan, its insurers,
employees, officers, directors, associates, and agents from any and all claims, demands, damages,
rights of action, or causes of action, present or future, whether the same be known or unknown,
anticipated, or unanticipated, resulting from or arising out of the use of said equipment.
This equipment must be used with care by capable and competent individuals under supervision,
WARNING
Heavy object. Use lifting aids and
proper lifting techniques when moving.
Choking hazard. Small parts –
Please exercise caution if small
children or pets are present.
Sharp objects may be involved.
Use precaution and protection.
TITAN LIMITED WARRANTY: TERMS, EXCLUSIONS AND LIMITATIONS OF REMEDIES
This product comes with a one (1) year limited warranty that can be found at
www.titan.fitness/warranty.html Please review the same for all details regarding the
Titan Limited Warranty.
THE TITAN LIMITED WARRANTY FOUND AT WWW.TITAN.FITNESS/WARRANTY IS EXCLUSIVE AND IS IN
LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING ANY IMPLIED WARRANTY OF
MERCHANTABILITY AND/OR FITNESS FOR A PARTICULAR PURPOSE, EACH OF WHICH IS HEREBY
DISCLAIMED.

13
NEED HELP? CONTACT US FIRST.
1-888-410-1503
info@titan.fitness
www.titan.fitness
© 2021 Titan Brands