Titon auramode BP 52422 User manual

ventilation systems
auramode BP 52422
Constant Flow Controller
EN Product Manual HRV controller
NL Producthandleiding HRV-regelaar
FR Manuel produit Commande HRV
DE Produkthandbuch HRV-Steuergerät

2
NL
Waarschuwingen, veiligheidsinformatie en richtlijnen. . . . 12
Productbeschrijving. . . . . . . . . . . . . . . . . . . . . . . . . . . .13
Inhoud verpakking. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Afmetingen en installatie van het display . . . . . . . . . . . . . .13
Bevestigingsmiddel. . . . . . . . . . . . . . . . . . . . . . . . . . . .13
Bedrading . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
Inschakelen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Bedieningsorganen en bediening van de auramode. . . . . . 14
Bedrijfsmodi. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15
SETUP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15
Boost uitschakeling . . . . . . . . . . . . . . . . . . . . . . . . . . . .15
Pictogrammen voor snelheidsinstelling . . . . . . . . . . . 15
Plannerconguratie. . . . . . . . . . . . . . . . . . . . . . . . . . . .16
Luchtvochtigheid . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16
Filter. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16
Boost Overrun . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16
Schakelaars. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17
In bedrijf stellen. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Reset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17
Menu- & submenu-items SETUP. . . . . . . . . . . . . . . . . . . . . . .18
Onderhoud. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Buitenzijde reinigen . . . . . . . . . . . . . . . . . . . . . . . . . . .19
Standaardinstellingen auramode. . . . . . . . . . . . . . . . . . . . . .19
Waarschuwingsmeldingen . . . . . . . . . . . . . . . . . . . . . . . . . . .20
EN
Warnings, Safety Information and Guidance . . . . . . . . . . . . . 4
Product Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Packaging Contents. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Dimensions & Display Installation . . . . . . . . . . . . . . . . . . . . . . 5
Fixing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Wiring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Powering Up . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
auramode Controls & Operation . . . . . . . . . . . . . . . . . . . . . . . . 6
Modes of Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
SETUP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
Boost Inhibit. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Speed Setting Icons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Scheduler Conguration . . . . . . . . . . . . . . . . . . . . . . . . . 7
Humidity. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Filter. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Boost Overrun . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Switches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Commission . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Reset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
SETUP Menu & Sub-menu Items. . . . . . . . . . . . . . . . . . . . . . . . 9
Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
Cleaning Exterior . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
auramode Default Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Warnings messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

3
FR
Avertissements, consignes de sécurité et directives. . . . . . .21
Description du produit. . . . . . . . . . . . . . . . . . . . . . . . . .22
Contenu de l'emballage . . . . . . . . . . . . . . . . . . . . . . . .22
Dimensions et installation de l'achage . . . . . . . . . . . . . . .22
Fixation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22
Câblage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Mise sous tension . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Commande et fonctionnement de auramode. . . . . . . . . . . .23
Modes de fonctionnement . . . . . . . . . . . . . . . . . . . . . . 23
CONFIGURATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Interdiction de ventilation forcée. . . . . . . . . . . . . . . . . 24
Icônes réglage de vitesse . . . . . . . . . . . . . . . . . . . . . . . 24
Conguration du programmateur . . . . . . . . . . . . . . . . 25
Humidité. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Filtre. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25
Temporisateur de sécurité de vitesse forcée . . . . . . .25
Commutateurs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26
Mise en service. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26
Réinitialiser. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Menu SETUP et options de sous-menu . . . . . . . . . . . . . . . . .27
Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28
Nettoyage extérieur. . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Réglages par défaut du auramode. . . . . . . . . . . . . . . . . . . . .28
Messages d'avertissement. . . . . . . . . . . . . . . . . . . . . . . . . . . .29
DE
Warnungen, Sicherheitsinformationen und
Orientierungshilfen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30
Produktbeschreibung . . . . . . . . . . . . . . . . . . . . . . . . . .31
Lieferumfang . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Abmessungen und Display-Installation . . . . . . . . . . . . . . . .31
Befestigung . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Verdrahtung . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32
Einschaltung . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32
Bedienelemente und Betrieb von auramode . . . . . . . . . . . . 32
Betriebsmodi . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33
EINRICHTUNG . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33
Turbosperre. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Symbole für die Drehzahleinstellung . . . . . . . . . . . . . 33
Konguration des Steuerprogramms . . . . . . . . . . . . . 34
Feuchtigkeit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Filter. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .34
Turboübersteuerung . . . . . . . . . . . . . . . . . . . . . . . . . . .34
Schalter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .35
Inbetriebnahme. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Zurücksetzen. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .35
SETUP-Menü und Untermenüelemente. . . . . . . . . . . . . . . . .36
Wartung. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .37
Äußere Reinigung . . . . . . . . . . . . . . . . . . . . . . . . . . . . .37
auramode-Voreinstellungen. . . . . . . . . . . . . . . . . . . . . . . . . .38
Warnmeldungen. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .38

EN
Warnings, Safety Information and Guidance
Important Information Read instructions fully before the installing this appliance.
1. This manual covers the operation of the HRV control system only, it
must therefore be read in conjunction with the relevant heat recovery
unit Product Manual.
2. Installation of the appliance and accessories must be carried out by a
qualied and suitable competent person and be carried out in clean,
dry conditions where dust and humidity are at minimal levels.
3. All wiring must conform to current I.E.E. Wiring Regulations and all
applicable standards and Building Regulations.
4. auramode must be connected using the communication cable provid-
ed.
5. Control & communication cables should not be placed within 50mm
or on the same metal cable tray as any 230V lighting or power cables.
6. Ensure all cable glands are fully tightened.
7. The unit must be stored in a clean and dry environment. Do not install
the appliance in areas where the following may be present or occur;
• Excessive oil or a grease laden atmosphere,
• Corrosive or ammable gases, liquids or vapours,
• Ambient temperatures above 40°C or below -5°C,
• Humidity levels above 90% or is a wet environment.
8. The appliance is not suitable for installation to the exterior of the
dwelling.
9. This appliance can be used by children aged from 8 years and above
and persons with reduced physical, sensory or mental capabilities or
lack of experience and knowledge if they have been given supervi-
sion or instruction concerning use of the appliance in a safe way and
understand the hazards involved.
10. Children should be supervised to ensure that they do not play with
the appliance.
11. To ensure compliance with the requirements Building Regulations
Approved document Part F use of the default schedule is not recom-
mended. The schedule should be cleared in the Scheduler section of
the menu.
4

Product Description
The auramode is a programmable timer & 3-4 speed switch for commissioning compatible Titon
HRV units. The auramode is connected to the HRV via a wired connection.
Packaging Contents
Inspect the unit when taking delivery. Check the unit for damage and that all accessories have
been supplied Package supplied with:-
1 x auramode controller.
1 x 14m auramode communication cable.
1 x Product Manual.
Any shortages or damage must be immediately reported to the supplier.
Dimensions & Display Installation
The auramode should be mounted in position convenient for the householder.
Fixing
Open auramode case using a small, at bladed screwdriver in the rectanguler openings on the
right-hand side. Fix backplate - the auramode can be xed over a standard surface mount or
recessed pattress; connect the communication cable and clip front of auramode to the backplate.
86.00
86.00
16.70
35.80
00:00 XXX
2016:05:03 XXXX
123
Time Auto / Manual/Status
Date & Day
5

Wiring
Communication cable connection to the auramode is by a pre tted plug on the supplied cable.
Connection to the HRV unit is to screw terminals on the HRV PCB.
Powering Up
The auramode is powered by the communication cable from the HRV unit. On powering up the
HRV the controller starts in AUTO mode and displays INITIALIZING.. while waiting for the
HRV unit to complete its start-up procedures.
auramode Controls & Operation
auramode has 4 buttons to control these are used to control and setup auramode. Each button
has multiple functions detained below.
Modes of Operation
The auramode has three modes of operation:
1. AUTO Speed in controlled by the programmed schedule (default mode).
2. MANUAL Speed is set manually, either by cycling through the speeds with the
QUICK BUTTON or by using to increase and to decrease speed.
3. SETUP Used to change settings.
Black/White12V
Yellow
Green
Orange
0V
A
B
HRV
Connection to HRVConnection to auramode
Enter Setup Menu [Long Press]
Select Menu Item
Fix Setting
Switch to Auto Mode
Increase Fan Speed
Navigate Menus
Change Settings
QUICK BUTTON
Cycle Fan Speeds
Toggle Manual / Auto Mode
Clear Filter Messages
Decrease Speed
Navigate Menus
Change Settings
6

In MANUAL mode press or press and hold [2 seconds] the QUICK BUTTON to enter AUTO
mode.
In AUTO mode press either , or QUICK BUTTON to change to MANUAL mode.
Press and hold [5 seconds] the to enter SETUP mode.
In MANUAL or AUTO mode press and hold [5 seconds] the QUICK BUTTON to reset any lter
warning message.
SETUP
To Enter SETUP by press and hold [5 seconds] the button.
Follow the on screen prompts and menu structure detailed in the SETUP Menu & Submenu Items
section and modify and congure the auramode to your requirements.
Boost Inhibit
Boost Inhibit is an additional option in the Schedule menu when selecting the speed the unit will
run at. During the Boost Inhibit period the unit remains in either Speed 1 or Speed 2 and does not
respond to external Boost switches or the Humidity sensor.
Speed Setting Icons
Listed below are the various icons are used to represent the speeds:-
Speed 1 or
Speed 2 or
Speed 3 or
Speed 4 or
Speed 1 with boost inhibit
Speed 2 with boost inhibit
Scheduler Conguration
The scheduler changes the speed setting at specic times. Times and speed settings are user
programmed in either seven day, weekday & weekend or individual day groups.
1. Select single day or day group to edit.
2. Press .
3. Select event to edit hh:mm - event not set yet.
4. Press .
5. Set hour.
6. Press .
7. Set minutes.
8. Press .
9. Set speed.
10. Press .
11. Select next event to edit, SAVE or EXIT.
It is possible to erase single event while setting its time
to hh:mm.
Events can be entered in random sequence: they are sorted automatically after saving.
►EXIT 1-5
►SAVE
01 00:00
02 06:30
03 08:30
04 12:00
05 13:30
1 to 5 Weekday screen
7

Humidity
The HRV has a relative humidity (RH) sensor. The humidity menu species at what RH the HRV will
boost to speed 3.
Filter
The HRV’s lters require regular replacement depending on environmental conditions. The
replacement period is set in the Filter section during setup as are the checked and replaced dates.
In normal use lter check and replace messages will appear on the main screen after changing or
checking lters messages are cleared by pressing and holding [5 seconds] the QUICK BUTTON.
Boost Overrun
auramode has separate timers for wet room and kitchen boost that controls the time the HRV
remains at speed 3 after all switches have been released.
Switches
The HRV has multiple switch inputs whose function can be programmed. SW1, 2 & 3 are volt free
switch inputs and LS1 & 2 are live switch inputs.
Switch Options
Kitchen Boost Wet Room Boost SummerBOOST Disable Speed 1 Setback Speed 4
Kitchen Wet Room SummerBoost
Commission
The Commission menu screen is used to program the
supply and extract fan speeds. When the menu screen is
selected the HRV fans will start to run at speed 2.
Use & to move between fan speeds the cursor
underlines the supply or extract speed l/s. Pressing the
highlights the speed l/s selected to be modied and
the HRV immediately switches to run supply and extract at
the corresponding speeds. Use the & to modify the
speed l/s and to save. When all the required fan speeds
have been congured navigate to the SAVE option to save &
exit the Commission menu to the SETUP menu, the unit will return to AUTO operation.
Use and to move between fan speeds - the cursor will highlight the supply or extract
speed. Press to select the required speed - the HRV will begin running at the selected speed,
and modify the speed using and . When speed is correct press and either select
another speed or if all the required fan speeds have been set as required navigate to the SAVE
option to save all settings to memory and return to the SETUP menu.
Reset
Reset menu sets to the default values.
►SAVE Commission
SUPPLY EXTRACT
88 78
179 166
311 295
392 392
Commissioning screen
8

SETUP Menu & Sub-menu Items
Menu item Description
EXIT Exit SETUP menu
Display Menu for display settings
EXIT
Backlight Change LCD Backlight brightness
Contrast Change LCD contrast
Language Menu to change language
EXIT
English
Nederlands
Français
Deutsch
Polski
Español
Italiano
Lietuvių
Русский
Українська
Slovenski
Magyar
3 Speed 1 to 3 Speed - 1 to 4 Speed toggle
Defaults Set display back-light and contrast to default values
Clock Menu to change date and time
EXIT
Time Set time 24 hour clock only
Date Set date and day
Scheduler Menu to congure timer controlled speeds.
EXIT
Clear all Clear all scheduled events - HRV will default to Speed 2
Edit
EXIT
1-7 Set same events for all days of the week. (day group)
1-5 Set same events for working days (Monday to Friday).
6-7 Set same events for weekend (Saturday & Sunday).
1..7 Set events for selected day.
EXIT Exit without saving
Save Save events and exit
1,2,..7, 8 Set time and position (speed level) of the event
Default Set Scheduler to default values
Humidity Set value of humidity threshold
Filter Menu to change lter settings
EXIT
Repl.Period(m.) Set lter replace warning time, 1 to 24 months.
Checked yy.mm.dd Set last checked date.
Replaced yy.mm.dd Set last replaced date.
Boost Overrun Menu for setting Kitchen & Wet Room overrun timers
Switches Menu to set switch functions & SummerBOOST®
Commission Menu to Set speeds 1 to 3 or 1 to 4 & SummerBOOST on/o
Save
Reset Reset auramode unit
9

Maintenance
The auramode is maintenance free.
Cleaning Exterior
For best results use a clean damp cloth. Do not use abrasive cleaners, solvents or any other uids.
auramode Default Settings
Scheduler
Days 1 to 5 Mon, Tue, Wed, Thur & Fri Days 6 & 7 Sat & Sun
Position Time Speed Position Time Speed
01 00:00 Speed 1 01 00:00 Speed 1
02 06:30 Speed 2 02 07:30 Speed 2
03 08:30 Speed 1 03 09:30 Speed 1
04 12:00 Speed 2 04 12:00 Speed 2
05 13:30 Speed 1 05 14:00 Speed 1
06 18:00 Speed 2 06 18:00 Speed 2
07 22:30 Speed 1 07 23:30 Speed 1
08 00:00 Speed 1 08 00:00 Speed 1
To ensure compliance with the requirements Building Regulations Approved document Part F use
of the default schedule is not recommended. The schedule should be cleared in the Scheduler
section of the menu.
Filter Display Switches
Replace Period 6 months Language English SW1 Speed 3 Kitchen
Contrast 36 SW2 Speed 3 Wet Room
Checked Date Current set date Backlight 192 SW3 SummerBOOST
3 / 4 Speed Toggle 3 Speed LS1 Speed 3 Kitchen
Replaced Date Current set date LS2 Speed 3 Wet Room
SummerBOOST ON
Speeds
Speed Supply Extract
1 88l/s 78l/s
2 179l/s 166l/s
3 311l/s 295l/s
4 392l/s 392l/s
10