Tobii Dynavox EM-12 User manual

Tobii Dynavox EM-12 with EyeMobile Plus
Tobii Dynavox’s Quick Release Adapter
Plate for I-110 and EyeMobile Plus.
Comes in the box but is not attached
Attach Tobii’s Quick Release Adapter
Plate to the back of the case with the
provided screws.
Slide the DP-QCR onto the Quick Release
Adapter Plate until it “clicks” and locks
in place.
Mounting Instructions
Attach the Quick Release Plate (QRP) to
the DP-QCR. Use 4 screws provided with
the QRP (8-32-1/4”) “QRP to Device Plate”
Attach the QRP to the Tilt
Plate on the Mount’n Mover
arm.
If your Mount’n Mover has the Quick
Connect Receiver (DP-QCR) instead of
the Tilt Plate you can attach directly to
Tobii’s Quick Release Adapter Plate.
Quick Connect
Receiver
(DP-QCR)
Quick Release
Plate
(DP-QRP)
Attach QRP higher
on the DP-QCR so
that the kickstand
can still be used
DP-QRP
DP-QCR
1 2 3
4 5a 5b
DP-QCR
Mounting Instructions for Tobii Dynavox EM-12 with EyeMobile Plus and Tobii Dynavox Indi

Tobii Dynavox Indi
Custom Quick Connect Receiver attachment
Mount’n Mover
Custom quickconnect attachment instructions
10/24/2017
Page 2 of 2
Removing the Tobii Dynavox Indi from the quickconnect
Locate the release lever (circled in red)
While depressing the lever, pull up on the device for
removal.
Mount’n Mover
Custom quickconnect attachment instructions
10/24/2017
Page 2 of 2
Removing the Tobii Dynavox Indi from the quickconnect
Locate the release lever (circled in red)
While depressing the lever, pull up on the device for
removal.
Removing the Tobii Dynavox Indi
from the Quick Connect Receiver
Locate the release lever (circled in red)
While depressing the lever, pull up on
the device for removal.
The custom Quick Connect Receiver includes four attachment screws to attach to
the Quick Release Plate. Fasten the Quick Connect Receiver to the top four
countersunk holes in the Quick Release Plate using the screws provided.
Attaching the Tobii Dynavox Indi to
the Quick Connect Receiver
The Indi device (with mounting boot) has
mounting slots compatible with the
Quick Connect Receiver
Slide the device down until you hear a
click or see that the locking lever has
engaged. Pull up on the device to
check that it is secure.
To attach, position the device to engage the
slots, ensuring that both slots are engaged