Tommee Tippee Weaning Straw User manual

044700130
SAFETY GUIDANCE
For your child’s safety and health.
WARNING!
• Always use this product with adult supervision. Accidents have occurred when babies have been left alone with drinking equipment due to the
baby falling or if the product has disassembled.
• Never use spouts or straws as a soother. Continuous and prolonged sucking of fluids will cause tooth decay. Tooth decay in young children can
occur even when non-sweetened fluids are used. This can occur if the baby is allowed to use the cup for long periods through the day and
particularly through the night, when saliva flow is reduced or if it is used as a soother.
• Always check food temperature before feeding.
• Always stir heated food to ensure even heat distribution and test temperature before serving.
• Keep all components not in use out of reach of children.
CLEANING AND STERILISATION
• Before first use, clean the product.
• Clean before each use.
• Always wash the product immediately after use.
• Wash in warm soapy water and rinse in clean water or use a dishwasher (top shelf only). Do not clean with solvents or harsh chemicals.
• Do not allow product to come into contact with oil based foods (e.g. oil/tomato based sauces) as staining will occur.
• Our insulated cups are suitable for sterilisation by cold water tablet/liquid solution only.
• All other cups are suitable for sterilisation by steam (electric and microwave), boiling or cold water tablet/liquid solution.
STORAGE AND USE
• Inspect before each use and pull the spout or straw in all directions.
• Throw away at the first signs of damage or weakness.
• Do not store or leave in direct sunlight or near a source of heat.
• Do not store with or allow to come into contact with solvents or harsh chemicals.
• Not suitable for use in a convectional oven or a combination microwave oven with the grill feature switched on.
• Not suitable for microwave use apart from sterilising. See cleaning and sterilisation instructions below.
• As with most sippy cups, ours are to be used with milk, water or juices that don’t contain pulp.
• DO NOT use with fizzy (carbonated) beverages, formula or hot liquids.
tommeetippee.com
STRAW CUPS: VALVE CUPS:
OUR NEW CUP RANGE IS INTERCHANGEABLE
MEALTIME CUPS:
Mealtime Trainers
Weaning Sippee
Weaning Straw Training Straw
Active Straw
Training Sippee
Active Sippee Active Sports Bottle
No matter what handle, lid or cup you decide to use in our NEW range, everything will fit together.
Ensure the cut opens
by squeezing before use.
straw, valve and mealtime cups
INSTRUCTIONS FOR USE

You should thoroughly clean your straw after each use.
INSTRUCTIONS FOR CLEANING STRAW CUPS Jackel International Limited trading as Mayborn Group
Northumberland Business Park West, Cramlington,
Northumberland NE23 7RH, UK
Copyright © Jackel International Limited 2015.
TOMMEE TIPPEE is a registered trademark of Jackel
International Limited.
Jackel International Limited retains all intellectual property rights
to this product, packaging and printed or electronic media
including all two and three dimensional designs, graphic images,
logos and text.
Jackel International Limited is incorporated in England and
Wales under company number 01894022.
Any manufacture, publication, copying, hiring, lending and
reproduction of any materials is strictly prohibited and
constitutes infringement.
International patent applications pending.
• Pull the straw downwards
and out from the lid
• Thread the straw back into the
trigger and clip the trigger back into
position.
CLEAN
REASSEMBLE
DISASSEMBLE
• Remove lid from cup base
• Pop up the straw by pressing
the trigger
• Remove the trigger from the lid
(wiggle left to right to release)
• Pull the trigger from the straw
• Pull straw up through lid
• Ensure silicone valve and straw is
clipped into place
INSTRUCTION FOR CLEANING MEALTIME CUPS
INSTRUCTIONS FOR CLEANING VALVE CUPS
You should thoroughly clean your valve after each use.
• Wash all parts thoroughly in warm
soapy water and rinse in clear water
• All parts can be washed in the
dishwasher (top shelf only)
• Always shake parts after washing to
remove excess water and leave to
air dry before reassembling
• Wash all parts thoroughly in warm
soapy water and rinse in clear water
• All parts can be washed in the
dishwasher (top shelf only)
• Always shake parts after washing to
remove excess water and leave to
air dry before reassembling
• Un-screw the lid
• Pull out the valve
• Separate the 2 parts of
the valve (soft & hard)
WARNING
• Ensure parts Aand Bof the soft side
are pushed through the holes of the
hard side. Ensure the cut Bopens by
squeezing before use.
• Place the valve back in the lid, and
push until the sides lock into place
• Screw on lid
2 2
3
2
1
2
valve
1 4
5
6
DISASSEMBLE
CLEAN
3
CLEAN
REASSEMBLE
You should thoroughly clean your valve after each use.
• Align the two parts and press together
AS PER ILLUSTRATION
• Turn screw ring upside down and place
silicone disk inside with grooves facing up
• Remove lid from cup base
• Grip lid and turn the locking
connector anti-clockwise
DISASSEMBLE REASSEMBLE
4
5
• Take the lid top and push down through
the hole in the silicone disk
• Align locking connector and turn clockwise
to lock
1
2 5
63
6
• Separate locking connector,
silicone disk, screw ring and lid top
• Place lid on base and align the 2 dots
on the back - Remember:
Do not over tighten.
4
Alignment indicator
Trigger
A
B
• Wash all parts thoroughly in warm
soapy water and rinse in clear water
• All parts can be washed in the
dishwasher (top shelf only)
• Always shake parts after washing to
remove excess water and leave to air
dry before reassembling
044700130