TOMZON D28 User manual

D28 Drone
User Manual
Web: www.tomzontoys.com/
FB: www.facebook.com/tomzonofficial/
Email: [email protected] [e-mail]
[e-mail]
[e-mail]
[e-mail]
[e-mail]
[e-mail]

.......................................................
................................................................
.........................................................................
.............................................................
...........................................................
...........................................................
................................................................
........................................................................................
........................................................................
.................................................................
........................................................................................
Contents
Flying Your Drone
Disclaimer & Warnings
Based On The Flight
Safety Guidelines
Package List
Drone’s Installation
APP
Trouble Shooting
FCC
Controller Functions
Specification
01
02
04
05
07
09
11
16
17
17
18
EN

Disclaimer & Warnings
1. Please read this Disclaimer & Warning and Safety Guidelines
carefully before using our product.This product is not recommend-
ed for people under the age of 14.By using this product, you
hereby agree to this disclaimer and signify that you have read it
fully.You agree that you are responsible for your own conduct and
any damaged caused while using this product, and its
consequences. You agree to use this product only for purposes
that are proper and in accordance with local regulations, terms
and all applicable policable polices.
. The drone is designed for 14+
. Adult supervision is always advisable with any from of flying toy
. Always ensure your flight area is free of all obstacles before
taking off, and ensure the drone is always flown in excess of 1.5
meters from yourself and others
. Remove all batteries from the drone and controller when not in
use
. Never overcharge
. Never leave to charge unattended
. Never touch the drones motors during or after as they can get hot
. Never touch the blades when they are in rotating
. If the drone becomes damaged, stop using it immediately
. Do not dispose of any parts of the drone or controller in the
normal rubbish,all parts should be taken to your local recycling
centre
. The battery in the drone should never be exposed to any form of
high temperature or disposed of in a fire
2. When using this product,please be sure to strictly abide by the
specification requirements and safety guidelines stated in this
document.
- 01 -
EN

Safety Guidelines
1. Make sure the surrounding area is free of all people,pets or other
obstacles before you start to fly your drone.
2. Your drone is designed for indoor or outdoor use.However,it is not
recommended to fly the drone inside if there is limited space, or
outside if there is any wind.
3. Keep a safe playing distance between you and the drone at all
times.
Fly in Open Areas Maintain Line
of Sight
Fly Below 164
feet (50m)
(1) This product is not a toy, but it is a high precision drone that
integrates various electronic stability and control
mechanisms.Please be sure to setup this drone carefully and
correctly to ensure safe,accident-free operation.
(2) Please be sure that the batteries of the drone and transmitter are
clean, undamaged and have enough power.
(3) Please be sure that all the propellers are undamaged and are
installed in the right orientation.
(4) Please do a thorough check of the product before each use.Check
for firmness of the parts, any signs of cracks and wear and tear of
the propeller, battery power and effectiveness of the product until
the problems have been solved.
1. Check Before Use
2. Safe flight Environment
- 02 -
EN

Waste Lithium-polymer batteries must not be placed with household trash.
Please contact local environmental or waste agency or the supplier of your
model or your nearest Li-Po battery recycling center.
(1) Please ensure batteries are fitted in the correct orientation as shown
in the instruction manual.
(2) Avoid short circuits by fiting the batteries incorrectly, and do not
crush or squeeze the batteries as this could carry the risk of an
explosion.
(3) Do not mix new and old batteries as this can lead to a poor
performance of the product.
(4) Dispose used batteries carefully.
(5) Please keep dead batteries away from heat and fire.
(6) If the device is not going to be used for an extended period of time,
remove batteries to prevent potential damage from battery leakage.
(7) It is recommended to only use the USB charging cable that comes
with the drone to charge the battery.
(8) Don't connect the battery directly to wall outlets or car
cigarette-lighter sockets.
(9) Don't attempt to disassemble or Modify the battery in any way.
(10) Don't use the battery if it gives of an odor, generates heat,
becomes discolored or deformed,or appears abnormal in any way.
If the battery is in use or being charged, remove it from the device
or charger immediately and discontinue use.
3. Use of Battery
Li-Po Battery Disposal & Recycling
- 03 -
EN

D28 Drone
User Manual
Web:www.tomzontoys.com/
FB:www.facebook.com/tomzonofficial/
Email:[email protected] [e-mail]
[e-mail]
[e-mail]
[e-mail]
[e-mail]
[e-mail]
Package List
RC Drone x 1 Mobile Phone Clip x 1Remote Control x 1
Battery x 2
Screwdriver x1 User Manual x1
Blade guard x 4 Spare Blade x 2 Pair
- 04 -
EN
Drone charger x1

Drone’s Installation
Insert the camera
Install landing gears
First, install one end of the landing gear into the cross groove into
the drone arm, then rotate the landing gear clockwise to slide the
other end of the landing gear into the slot.
Step 2: Connect the camera
cables to the drone.
Step 1: Enter the camera tabs
into the corresponding
couplings of drone
making sure that points
forward.
- 05 -
01
02
EN

1. Remove the battery from the drone compartment. (make sure that
the drone is off)
2. Connect the USB charger to the computer.
3. Connect the battery to the USB charger, When charging, the
indicator lights red, and after full charging, the indicator lights
green.
Insert the blade guard into the drone arm in a positive and horizontal
direction.
It is recommended the beginners install the protective guard to avoid
damage due to operational errors.
Install blade guards
Insert the battery into drone
Charing the drone battery
- 06 -
EN

Controller Functions
Red light is always on when charging, green light is always on when
fully charged.
Power Bank
Computer USB Port
USB Adapter
(5V/0.5-2.0A)
Throttle left stick
WARNING
Do not leave the battery unattended while charging & only use
the supplied battery or plug charger.
Power swith
Speed-select button
Video
Picture
Right stick
One key start
One key stop
Trim
Auto return button
Emergency Stop
Headless mode
Flip button
- 07 -
EN

1. Unscrew the battery cover,and insert 4xAA batteries(not included),
making sure you insert them following the correct polarity as
shown
2. Re-attach the battery cover
Always use alkaline batteries
Never mix old and new batteries
.
.
4xAAbatteries
(not included)
Remove and install the phone holder
- 08 -
EN

Based on the Flight
It is crucial that all the propellers are installed in the correct position
(Pay attention to the letter A or B printed underneath each propeller.)
Drone’s details
Propeller A
(Clockwise)
Propeller A
(Clockwise)
Propeller B
(Counter Clockwise)
Propeller B
(Counter Clockwise)
HEAD
Camera
Pairing your drone to the controller
1. Turn on the remote control
power switch
- 09 -
EN

2. Connect the battery to the drone and turn on the drone. The LED
on the drone will flash.
3. Place the drone down on a flat surface, and make sure that the
head of the drone is facing the front and the tail facing the rear
(player).
4. When the left stick of the remote control is pushed up to the top,
the remote control will give a "beep" sound(as shown in 01).
When the left stick of the remote control is pulled down to the
bottom, the buzzer will give a long "beep" (as shown in 02).
Pairing is complete once the drone lights & controller lights stop
flashing.
- 10 -
01
02
EN

5. Drone LED Indicator Status.
Method 1:
Turn the left and right stick to the inside downwards at the same
time , and push the throttle stick(left stick) upward.
The front and rear LED lights flash quickly Remote control not
connected/calibrating
Remote control connected
Photographing
Video-recording
Recording finished
Headless mode
The front and rear LED lights stay on
The front and rear LED lights flash once
The front and rear LED lights off for 2
seconds and then flash slowly
The front and rear lights off for 2 seconds
and then stay on
The front and rear LED lights keep flashing
3 times and then go out
Flying your drone
Taking Off/ landing
Taking Off
- 11 -
EN

Use “throttle left stick” to
control the altitude & rotation
during flight.
Ascend
Decend
Method 2:
Short press the "take off and landing" button , hear a short
"beep",the aircraft will take off slowly and hover at an altitude of
about 1.2 meters.
Method 1:
Press the one key stop button, the drone will land by itself.
Method 2:
Push the throttle left stick down until the drone lands.
Altitude & rotate
landing
Take off Method 1
Landing Method 1
Take Off/Landing
Method 2
- 12 -
EN

Use “right stick” to control
forward, backward,left & right
movement during flight.
Backward
Right trim
Forward trim
Backward trim
Left trim
Forward
RightLeft
If the drone sways in an unprompted direction, use the trim buttons
to correct the flight:
Forward / backward / left / right
Trimming
Features
1
2
3
4 6
5
7
8
- 13 -
- 12 -
EN
To activate headless mode,press “headless” button and the drone
will fly in the selected direction, regardless of the direction the
drone is facing.
1. Headless mode:

Select between 3 speed modes:
40% speed (controller makes 1 beep);
60% speed (controller makes 2 beeps);
100% speed (controller makes 3 beeps)
Press once the photo button, the LEDs on the drone will blink
once and the remote control gives one beep sound.
Press and hold the button on the transmitter, the motors will stop
spin immediately.
Perform 360 flips by pressing the “flip” button and immediately
press the “throttle right stick” in the desired direction
Short press the "take off and landing" button , hear a short
"beep",the aircraft will take off slowly and hover at an altitude of
about 1.2 meters.
Press the one key stop button, the drone will land by itself.
Press the auto return button, the drone will automatically return in
the direction of the drone tail before takeoff. (Most of all, consumers
must keep in mind the drone orientation before the drone takes off,
otherwise the return direction of the drone will deviate.)
Press once the video button, the LEDs on the drone will be off for
a short time then begins to blink continually, and the remote gives
two "beep" sounds. Press the same button again to stop
recording, the LEDs will be off for a short time then becomes
steady on.
2. Speed modes:
3. To take a photo:
4. To record a video:
5. Emergency Stop:
6. One key start/stop:
8. Auto return button:
7. 360 Flips:
o
o
Only stop motors during the flight when emergent situation happens,
so as to reduce the risk of damage or injury.
- 14 -
EN

When the flight of the drone is unstable or deviated from the left and
right after take-off, the consumer can calibrate the gyroscope and
the flight will be more stable after the calibration.
1. Turn on the drone and controller, place the drone on a flat ground
(it is very important).
2. Then push left throttle of the controller to the left-down corner (7
o'clock direction) and right throttle to the right-down corner (5
o'clock direction) at the same time and hold for few seconds
during which the LEDs will blink. Then, the drone will be ready to
fly again.
Calibration
- 15 -
EN

APP
Scan the QR code below or search "Tomzon-V" in App Store or
Google Play to download the App.
1. Turn on the drone.
2. Enter the “Settings” menu of your mobile device.
3. Then turn on “Tomzon_D28_xxxxxx” and connect to the WIFI of
the drone.
4. Open the APP, you would see the real-time video from the drone
camera, and you now can start your flight.
Download the App
APP control interface
Connect to the APP:
Tomzon-V
- 16 -
For smart phone with Android 5.0+:
Search and download " Tomzon-V " from
Google Play. Or scan the QR code below to
download.
For smart phone with iOS 9.0+:
Search and download " Tomzon-V " from App
Store. Or scan the QR code below to download.
EN
Main interface
One key take off
One key landing
One key calibration
Emergency stop
Take a picture
Take a video
Media Library
Speed adjust(30%,60%,100%)
music mode Gravity sensor
The lens flip
Path flight
3D Flip
Virtual stick switch
Headless mode

Trouble shooting
Take-off weight 132g
27x27x11cm
2m/s
10-12min
2.4GHz
100m（No interference, no shelter）
50m（No interference, no shelter）
1920x1080
720p
3.7V 1000mAh 3.7Wh LiPo
90-120min
0-40℃
Drone size
Maximum horizontal flight speed
Flight time
Working frequency
Maximum effective distance of signal
Image transmission range
Video resolution
Maximum resolution
Battery
Full charge time
Working environment temperature
Working frequency 2.4GHz
165g
4 x“AA" battery(not included)
Weight
Remote control battery
problem
Drone
Remote control
cause of the problem solution
The indicator lights of the
drone are flashing and does
not respond to the transmitter.
1. Transmitter is not synced
to the drone.
2. Insufficient battery power.
1. Refer to the preparation
for FLIGHT and pair again.
2. Recharge the battery.
The propellers spin,but
the drone cannot take-off.
1. Insufficient battery power.
2. The propellers are installed
in wrong orientation.
3. The propellers are distorted.
1. Recharge the battery.
2. Install the propellers in
right orientation.
3. Replace the propellers.
The drone sways sharply. The propellers are distorted. Replace the propellers.
Drone cannot stay balanced
in flight.
1. The propellers are distorted.
2. The motor doesn’t work
properly.
1. Replace the propellers.
2. Replace the motor.
The drone is out of control
after crashing.
Six-axis acceleration sensor
losed its balance after
crashing.
Restart and re-calibrate
the drone.
The drone rotates upwards
when pushing up the throttle
lever or the drone sways
The motor doesn't work
properly Replace the motor
Specification
- 17 -
EN

FCC
Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject
to the following two conditions:
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses,
and can radiate radio frequency energy, and if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.
This equipment complies with FCC radiation exposure limits set forth for
an uncontrolled environment. This equipment should be installed and
operated with a minimum distance of 20cm between the radiator&your
body. This transmitter must not be co-located or operating in conjunction
with any other antenna or transmitter.
- 18 -
EN